• 한국물환경학회지
• /
• 제26권3호
• /
• pp.491-496
• /
• 2010

This study aimed to obtain equilibrium concentration on adsorption removal of phosphorus by activated carbon, to express the adsorption characteristics following Freundlich isotherm and also, based on the value obtained, to investigate the relationship between physical properties of activated carbon and dynamics of phosphorus removal by obtaining rate constant and effective pore diffusivity. The results summarized from this study are as follows. Phosphorus adsorption equilibrium reaching time of powdered activated carbon was reduced as the dosage of activated carbon increases, while granular activated carbon despite increased dosage did not have influence on adsorption equilibrium reaching times of phosphorus as well, taking more than 10 hours. It was also noted that powdered activated carbon showed better adsorption ability than granular activated carbon. The value of constant (f) of Freundlich isotherm of powered activated carbon on phosphorus was 4.26 which is bigger than those of granular activated carbon. The adsorption rate constant on phosphorus of powered activated carbon with low effective diameter and iodine number was highest as $8.888hr^{-1}$ and the effective pore diffusivity ($D_e$) was lowest as $2.45{\times}10^{-5}cm^2/hr$, and the value of phosphorus adsorption rate constant of granular activated carbon was $0.174{\sim}0.372hr^{-1}$, It was revealed that, with the same amount of dosage, the adsorptive power of activated carbon with lower effective diameter was better and its rate constant was also high.

• 제어로봇시스템학회논문지
• /
• 제2권2호
• /
• pp.108-114
• /
• 1996

We present proofs of the stability and convergence of Self-organizing feature map (SOFM) neural network with time-invarient learning rate and binary reinforcement function. One of the major problems in Self-organizing feature map neural network concerns with learning rate-"Kalman Filter" gain in stochsatic control field which is monotone decreasing function and converges to 0 for satisfying minimum variance property. In this paper, we show that the stability and convergence of Self-organizing feature map neural network with time-invariant learning rate. The analysis of the proposed algorithm shows that the stability and convergence is guranteed with exponentially stable and weak convergence properties as well.s as well.

• KDI Journal of Economic Policy
• /
• 제37권4호
• /
• pp.1-20
• /
• 2015

We examine the validity of popular exchange rate models such as the purchasing power parity (PPP) hypothesis and the monetary model for Korean won/US dollar exchange rate. Various specification tests demonstrate that Korean data are more favorable for both models based on time-varying cointegration coefficients as compared to those based on constant cointegration coefficients. When the abilities to predict future exchange rates between those models based on time-varying cointegration coefficients are compared, an in-sample analysis shows that the time-varying PPP (monetary model) has better predictive power over horizons shorter (longer) than one year. Results from an out-of-sample analysis indicate that the time-varying PPP outperforms models based on constant cointegration coefficients when predicting future exchange rate changes in the long run.

• 대한수학교육학회지:수학교육학연구
• /
• 제27권3호
• /
• pp.599-614
• /
• 2017

본 연구의 목적은 심칼 프로그램을 활용하여 역동적인 함수적 상황을 관찰하고, 이를 다양한 방식으로 표현하고 해석하는 과정에서 드러나는 중학생들의 일정한 변화율에 대한 이해를 비교 및 분석하는 것이다. 본 연구에서 분석된 수업은 중학교 1학년 학생 6명을 대상으로 진행된 수업 자료의 일부이다. 수업 자료를 분석한 결과, 심칼 프로그램을 활용한 수업은 다음 두 가지 의미를 갖는 것으로 드러났다. 하나는 변화율이 일정한 상황에서 학생들이 주목하는 양들 사이의 관계가 서로 다를 수 있다는 것과, 다른 하나는 학생 스스로 변량의 변화를 조정하고 그 결과를 확인하는 활동을 통해 일정한 변화율의 의미를 더 정교하게 구성하였다는 것이다. 따라서 본 연구는 함수의 교수 학습 상황에서, 특히 일정한 변화율을 포함하는 상황을 다양한 방식으로 표현하고 해석하는 활동에서 공학적 도구를 활용해야 할 필요성을 학생들과의 실제 수업에 근거하여 제시한 것으로, 학생의 이해 수준을 고려하여 공학적 도구를 활용한 함수 지도 내용과 그 방식을 계획하는 데 긍정적인 도움을 줄 것으로 사료된다.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2391-2397
• /
• 1993

The distribution of fatigue crack growth rate is influenced by the measuring interval and methods of calculation of crack growth rate. The purpose of this paper is to suggest a method for the evaluation of crack growth rate distribution without the influence. The constant ${\Delta}P$ test and the constant .DELTA.K test are executed by using the CT specimen. The measuring interval of (${\Delta}a$/W=0.0067~0.014) crack length is not affected by methods of the calculation of the fatigue crack growth rate is suggested.

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.362-367
• /
• 2008

We have Manufactured the low-k dielectric interlayer fabricated by plasma enhanced chemical vapor deposition (PECVD), The thin film of SiOCH is studied correlation between components and Dielectric constant. The precursor was evaporated and introduced with the flow rates from 16 sccm to 25 sccm by 1sccm step in the constant flow rate of 60 sccm $O_2$ in process chamber. The chemical characteristics of SiOCH were analyzed by measuring FT/IR absorption lines and obtained each dielectric constant measuring C-V. Then compare respectively. ILD of BTMSM/$O_2$ could have low dielectric constant about $k\sim2$, and react sensitively. Also dielectric constant could be decreased by the effects of decreasing $CH_3$ and growing Si-O-Si(C) after annealing process.

• 한국지반신소재학회논문집
• /
• 제13권4호
• /
• pp.33-43
• /
• 2014

최근 들어 연약지반상에 구조물을 건설하는 경우가 증가하고 있으며, 사회기반 시설의 유지관리 및 건설 비용의 절감을 위해 사전압밀공법 및 연직배수공법과 같은 기존의 방법을 이용하여 지반 개량이 행해지고 있다. 이와 같이 연약점성토 지반상에 다양한 개량공법이 적용 될 때, 점성토의 낮은 투수계수로 인한 장기간에 걸친 압밀침하가 중요하게 된다. 압밀침하와 관련된 기존 연구결과에 따르면, 기존의 표준압밀시험의 재하기간은 압밀정수 산정에 최소한 10일 이상의 시간을 요하게 된다. 따라서 이 연구에서는 서남해안의 대표적인 연약지반으로 구성된 광양만 재성형 해성점토를 이용하여 표준압밀시험과, 일정변형률 압밀시험의 변형률 속도를 변화시킨 실험을 수행하였다. 실내시험결과를 통해 등변형률 속도에 따른 압축특성, 변형률-유효응력관계, 재하속도에 따른 간극수압 변화특성, 압밀정수와 등변형률 속도의 관계를 비교/분석하였다.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.1-7
• /
• 2008

Fine grained superplastic Zn-22%Al alloy was extruded using a laser machined micro-die to produce a micro-gear shaft. Extrusion process was conducted under a constant pressure at constant temperatures ranging from 503 to 563K. Laser machining was capable to machine a micro-die with close tolerances and adequate surface quality. The extrusion rate increased with extrusion load under constant extrusion temperature. The rate reached a steady state and became constant after a certain period. There was a small instantaneous stroke on application of the load and then a very brief primary stage which preceded steady-state flow. The micro-extrusion process was proven to produce a micro-gear shaft successfully using a fine grained superplastic Zn-22%Al alloy.

• 한국정밀공학회지
• /
• 제9권2호
• /
• pp.116-121
• /
• 1992

The optimal extrusion process for the rate sensitive materials have been developed in this study. The preliminary designs of the die shapes have been carried out to maintain constant strain rate during extrusion and the upper bound approach has been applied to define the process variables (the die entrance velocity and the die length) including the rheology during deformation. The result for the axisymmetric extrusion process has been verified with rigid-viscoplastic finite element analysis. It has been confirmed that the optimal die has wider band of constant strain rate than the conical one does.

• Journal of Pharmaceutical Investigation
• /
• 제14권1호
• /
• pp.11-18
• /
• 1984

This paper was attempted to study on the effect of metoclopramide or propantheline on the absorption rate and bioavailability and pharmacokinetic parameter of fluorouracil in rats and rabbits. The result are as follows; Metoclopramide increased the absorption rate of fluorouracil but propantheline decreased in situ experiment with rat small intestine. Metoclopramide increased the blood level and relative bioavailability and absorption rate constant of fluorouracil in rabbits. Prolonged the peak blood level (tmax) and decreased the absorption rate constant (Ka) but did not affect the blood level and relative bioavailability of fluorouracil in rabbits. As a matter of fact, it is considerd that the coadministration of metoclopramide or propantheline is more desirable than the single administration of fluorouracil for available dosage regimen.