• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.341-344
• /
• 2005

Recently, the application of Rapid Setting Cement has been gradually increased as an important construction. However, Rapid Setting Cement shows brittle failure. Therefore, in this study, tests are carried out using Rapid Setting Cement containing fiber in order to improve such a poor property. silica-cement ratio are varied. According to experimental results, Fiber reinforced Rapid -Setting Cement showed the high ductility and strain capacity regardless of silica-cement ratio. With 0.5 silica-cement ratio, a bending strength is the highest.

• 산업기술연구
• /
• 제21권B호
• /
• pp.301-306
• /
• 2001

Drying shrinkage cracking which may be caused by the relatively large specific surface is a matter of grave concern for latex modified concrete(LMC) overlay and rapid-setting cement latex modified concrete(RSLMC) overlay. Therefore, the purpose of this dissertation was to study the drying shrinkage properties of LMC and RSLMC with the main experimental variables such as cement types(ordinary portland cement, rapid setting cement), latex contents(0, 5, 10, 15, 20%), W-C ratios, and curing days at a same controlled environment of 60% of relative humidity and $20^{\circ}C$ of temperature. Test results revealed that the drying shrinkage of latex modified concrete(LMC), rapid-setting cement latex modified concrete(RSLMC) was considerably lower than that of ordinary portland cement concrete(OPC), rapid-setting cement concrete(RSC), respectively. This may be attributed to the interlocking of hydrated cement and aggregates by a film of latex particles, water retention due to hydrophobic and colloidal properties of the latexes, resulting in reduced water evaporation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.589-592
• /
• 2006

The growth in concrete structure repair has prompted major efforts to develop high early strength concrete. So, we were examined fundamental properties of cement mortar using the ordinary portland cement with rapid-setting cement. The experiments were carried out to investigate the characteristics of rapid-setting cement according to the blended ratio. The containing ratio of rapid-setting cement were changed five steps (20, 30, 50, 70, 100%) and then the flow value, setting time, compressive and bond strength test of cement mortar with RSC were investigated in this study.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1029-1034
• /
• 2001

The purpose of this research is to develop rapid setting cement latex modified concrete (RSLMC) which will be used to overlay bridge deck for maintaining and repairing. The main experimental variables were the types of rapid setting cement and variation of latex and antifoam agent contents were selected as admixture factor, then the properties of workability and strength development and durability properties were investigated. The results of this study show that latex content give increment of a slump due to surface tension in polymer particles and reduce unit weight of water for preservation of workability. In addition, When no and 1.6~3.2% antifoam agent were mixed, 8%, 2.0~3.8% were respectively obtained. An increasing the amount of latex produced concrete with increased flexural strength, but with slightly lower compressive strength. Rapid chloride permeability and freezing-thawing test carried out. As a results, according to increment of containing ratio antifoamer, strength of RSLMC increase, permeability showed lower value than ignorable 100 coulombs. Also, in the case of more than antifoamer 1.6%, the relativity dynamic modulus is mantained more than 90%, but in case of 0, 5%, it decrease. In consequence, with the view of strength and workability of RSLMC, it is considered that appropriate content ratio of antifoam agent and latex solid are respectively 1.6% by latex weight, 15% by cement weight.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.189-198
• /
• 2008

일반적으로 UFFA(Ultra Fine Fly Ash)는 일반 플라이 애시보다 워커빌리티를 더 좋게 하고 포졸란 반응을 더 크게 활성화시키는 특성을 가지고 있으며, 이와 같은 특성이 콘크리트의 내구성을 더욱 향상시키는 것으로 보고되고 있다. 본 연구에서는 이러한 UFFA의 특성을 활용하여 초속경시멘트에 UFFA를 첨가한 콘크리트 혼합물이 조기교통개방용 콘크리트포장 보수재료로서 활용이 가능한지 여부를 판단하고자 하였다. 기 연구에서는 초속경시멘트에 UFFA만을 첨가할 경우, 포졸란 반응이 크게 활성화되지 못하여 내구성 증진에 큰 효과가 나타나지 않았다. 이에 본 연구에서는 초속경시멘트와 UFFA에 수산화칼슘을 추가로 첨가하여 제조된 콘크리트 혼합물의 포졸란 반응 발생여부를 판단하고, 이것이 콘크리트 물성에 어떠한 영향을 미치는지를 분석하였다. 본 연구결과, 초속경시멘트에 UFFA를 첨가할 경우 W/C비를 크게 낮출 수 있어 콘크리트의 조기강도 저감부분을 충분히 상쇄시킬 수 있는 것으로 나타났다. 또한 X-선회절분석과 염소이온침투저항성 실험결과를 볼 때 수산화칼슘 첨가에 따른 UFFA초속경 콘크리트의 포졸란반응이 첨가하지 않은 것에 비하여 더 크게 활성화되는 것으로 나타났으며, 특히 수산화칼슘 첨가량이 증가함에 따라 UFFA 초속경 콘크리트의 투수저항성이 전반적으로 증진됨을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.799-804
• /
• 2003

The purpose of this study was to investigate the effects of re-vibration and curing temperature onto the physical properties of latex-modified concrete with ordinary cement and rapid-setting cement, and thus to provide a guide line of re-vibration and curing conditions for good quality controls. The main experimental variables included two cement types(ordinary portland cement, rapid-setting cement), curing Temperature($10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$), re-vibration methods(continued, intermittent), and re-vibration times(initial setting, one day after mixing). The experimental results showed that the re-vibration affected little to the mechanical properties of LMC and RSLMC, while, the curing temperature a quite some. The early strength development was the highest at $20^{\circ}C$ curing temperature, and decreased at higher temperature. The permeability of concrete generally decreased with curing time. The rapid chloride permeability was a function of time and temperature. The chloride permeability of RSLMC was so small and negligible.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.323-328
• /
• 2002

Rapid set accelerators are widely used in tunnel construction, however quality criteria of and dosage are not well established. The density and solid content of admixtures, setting time and compressive strength of paste and mortar with admixtures were investigated to establish the quality criteria. While the early strength of mortar with sodium-silicate, sodium-aluminate and calcium aluminate type admixtures that have high alkali content are very high, but long-term strength are low. Aggregates of shotcrete has to be carefully selected. Sodium-silicate type admixture need longer setting time than the others.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.355-360
• /
• 2002

The purpose of this study was to remove the excessive air foaming which was produced in mixing the RSLMC(latex-modified concrete with rapid- setting cement) by choosing the best antifoam agent type and the optimized quantity for performance improved RSLMC. A series of RSLMM(latex-modified mortar with rapid-setting cement) experiments were carried out as the basic for RSLMC with the main experimental variables such as antifiamer types(A, B, C, D), antifoamer contents(0, 1, 2, 3%). Air content test and compressive, flexural tests were carried out to measure the improved properties of RSLMM and RSLMC. Chloride ion permeability test was carried out to estimate water permeability resistance. The results of RSLMM showed that the decrease of 50% air content was obtained by admixturing a antifoam agent by 1%. The compressive strength and flexural strength at 3 hours after RSLMC placement were 235kgf/cm$^2$ and 49kgf/cm$^2$, respectively, which exceeded the flexural strength criterion of 45kgf/cm$^2$ in order to open the RSLMC placed to traffic. The chloride permeability using A and C antifoamer at 28 days were below 100 coulombs, which was the permeability rating of negligible according to ASTM.

• 콘크리트학회논문집
• /
• 제14권1호
• /
• pp.76-82
• /
• 2002

초속경 시멘트 콘크리트는 양생 시 초기재령에서 높은 수화열과 건조수축으로 인해 균열이 발생하기 쉽다. 이러한 문제점을 해결하기 위해 각종 소재를 적극 활용하려는 노력의 일환으로 섬유보강 콘크리트를 사용하게 된다 합성섬유보강 콘크리트는 건조수축에 대한 저항성과 내구성을 증진시키는 것으로 보고되고 있는데 대부분이 일반콘크리트에 대한 연구가 수행되었을 뿐 초속경 시멘트콘크리트에 관한 건조수축의 영향에 대해 정량적 및 정성적 연구가 미미한 상태이다. 따라서, 본 연구에서는 합성섬유보강 콘크리트의 건조수축 저감효과와 초속경 시멘트 콘크리트에서 수축에 대한 구속효과를 평가하기 위하여 콘크리트종류, 섬유보강 여부, 물-시멘트비, 구속여부를 주요 실험변수로 하여 건조수축실험을 수행하였다. 그 결과 일반 콘크리트에 비해 초속경 시멘트 콘크리트의 건조수축의 진행이 상당히 작음을 알 수 있었다. 이는 속경성 콘크리트의 수화반응이 빠르게 진행되어 건조에 의한 중량감소율이 다소 작은 점과 수화생성물과의 관계에 기인되는 것으로 판단된다. 또한 1축으로 구속된 건조수축의 구속으로 인한 초속경 시멘트 콘크리트의 건조수축을 예측할 수 있었고 초속경 시멘트 콘크리트에 섬유보강으로 인한 건조수축 제어는 일반콘크리트에 비해 효과가 매우 큰 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.236-237
• /
• 2018

The aim of the research is evaluating a fundamental properties of mortar with atomized molten slag to develop a hardener for dry soil paving concrete. According to the analyzing results, comparing OPC, more favorable strength characteristics were obtained, while it showed rapid setting when the mixture contained more than 10 %. Therefore, when the atomized molten slag is used as a hardener, appropriate retarding process is needed.