• The korean journal of orthodontics
• /
• v.36 no.4
• /
• pp.308-320
• /
• 2006

Rapid canine retraction, first introduced by Liou, is a distraction osteogenesis applied to the periodontal ligament tissue. Rapid tooth movement was facilitated by establishing minimal bony resistance on the distal surface of the canine by socket preparation and by osteogenesis on the mesial side in response to the periodontal distraction. Since undesired buccal tipping or extrusion of the canine during retraction tends to occur, it is crucial to maintain the firm path of movement and the axis of the canine during retraction. In order to improve the predictability of the canine movement, lingually extended distraction screws with heavy labial guiding wires were designed. Prefabricated plastic canine models for the estimation of socket depth and miniscrew implants for anchorage reinforcement were also devised. Applying these devices to a female patient with Class II anterior protrusion, the whole treatment was effectively finished in 13 months. Loss of vitality or periodontal problems did not occur throughout treatment, and stable occlusion was maintained during 10 months of retention. This case report demonstrates that a predictable rapid canine retraction can be achieved through the use of this modified technique.

• Archives of Pharmacal Research
• /
• v.10 no.1
• /
• pp.42-49
• /
• 1987

This study is to evaluate the potential use of aclarubicin-loaded gelatin microspheres as an intravascular biodegradable drug delivery system for the regional cancer therapy. The diameter of the microspheres prepared by water in oil emulsion polymerization could be controlled by adjusting the stirring rate in the range of 10-50 $\mu$m : D(in $\mu$m) = -73.8 log (rpm) + 262.7. The addition of proteolytic enzyme increased the in vitro aclarubicin release but it did not change the amount of the initial burst release which reached about 45%. Microspheres injected intravenously into the mouse tail vein embolized only to the lung when observed by fluorescence microscopy. From histological examination following injection of gelatin microspheres into mouse femoral muscle, mild inflammation was observed from the appearance of neutrophils after 2 days and rapid repair process was confirmed thereafter. Biodegradation process of gelatin microspheres lodged on the pulmonary capillary bed was followed up by microscopic observation; degradation was taking place by about 36 hrs, followed by severe damage on the spheerical shape and microspheres was no longer found 10 days after injection.

• Journal of the Korean Ceramic Society
• /
• v.37 no.5
• /
• pp.425-431
• /
• 2000

Cobalt ferrite thin films on Corming glass substrate were fabricated by a sol-gel method. Cobalt ferrite thin films with the grain size of 20-35 nm and thickness of 50nm were obtained. Rapid thermal annealing (RTA) and Annealing processes were adopted for comparison of characteristics of the films. Coercivity values were changed with thermal condition and magnetization values were increased as a function of soaking time. With prolonged soaking time, however, it was decreased because of the diffusion of cations from the glass substrate. The RTA process in preparation of cobalt ferrite thin film was the effective way to prevent and to form a single spinel phase in reduced soaking time. The film heated at 600$^{\circ}C$ for 30 minutes by RTA had coercivity of 2,600 Oe, saturation magnetization 460 emu/㎤, and Mr$.$$\delta$ of 1.43 memu/$\textrm{cm}^2$.

• Journal of the Korean Chemical Society
• /
• v.58 no.5
• /
• pp.445-449
• /
• 2014

A convenient and efficient method has been developed for the one-pot synthesis of dihydropyrimidinones (DHPMs) compounds. Dihydropyrimidinone derivatives were synthesized in good yields using ethyl acetoacetate, aldehyde (aromatic and aliphatic) and urea or thiourea in the presence of ZnO nanoparticles as a catalyst in $H_2O$ as solvent at $80^{\circ}C$. This green chemistry procedure applied to the Biginelli reaction using ZnO nanoparticles as catalyst and illustrated as a rapid preparation of DHPMs in water as solvent. The products were identified by physical data (mp) by comparison with those reported in the literatures.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2032-2038
• /
• 2009

The amount of phenol and NaOH for the colorimetric determination of ammonia in Korean standard methods (KSM) is found to be highly excessive compared to the standard methods of several other countries. The absorbance of indophenol formed by the Berthelot reaction for ammonia analysis was measured under the various reaction conditions classified in experiment groups 1, 2, 3, 4 and KSM and American standards methods (ASM), and the relationships between the absorbance of indophenol and concentration of ammonia were compared. The amount of phenol can be reduced to 10 g (current 25 g in KSM) and NaOH can be reduced to 1.76 g (current 11 g in KSM) for the preparation of 200 mL phenate solution, and the absorbance sensitivity increased. The concentration of the phenol and NaOH correlatively affect the pH of the solution, which is a critical variable in achieving the maximum sensitivity and rapid and stable color development.

• Korean Journal of Health Education and Promotion
• /
• v.8 no.1
• /
• pp.14-21
• /
• 1991

In accordance with the rapid industrialization in Korea, there have been remarkable changes in the health environment. The major changes are ; the change of disease structure, the aging of population structure, the diversification of health needs and the increase of health care costs. Because most of health problems stems from the environment, national health policy should be conducted according to the environmental changes. It is necessary for the voluntary organizations as well as the government ones to plan and participate the national health promotion movement on a national level so as to make the people form the attitude that health promotion is better than cure. Also, it is desirable that national health promotion movement be implemented gradually especially by four steps, 1) preparation step; 2) enlightenment step: 3) implementation step: 4) evaluation step.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.4
• /
• pp.357-363
• /
• 2006

Monolithic molecularly imprinted columns were designed and prepared by an in-situ thermal-initiated copolymerization technique for rapid separation of tryptophan and N- CBZ-phenylalanine enantiomers. The influence of polymerization conditions and separation conditions on the specific molecular recognition ability for enantiomers and diastereomers was investigated. The specious molecular recognition was found to be dependent on the stereo structures and the arrangement of functional groups of the imprinted molecule and the cavities in the molecularly imprinted polymer (MIP). Moreover, hydrogen bonding interactions and hydrophobic interactions played an important role in the retention and separation. Compared to conventional MIP preparation procedures, the present method is very simple, and its macroporous structure has excellent separation properties.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.350-353
• /
• 2004

This study was conducted for a rapid and simple method using GC/FID and SPME to dectermin gasonline and chlorinated solvents simultaneity. A sodium chloride concentration of 25%(vol/w) combined with such as magnetic stirried, an absorption time of 20min, an extraction temperature of 4$0^{\circ}C$, the volume of minimized 50mL of gaseous phase and a desorption time of 5min pleprovided the greatest sensitivity while maintaining analytical efficiency. Analytical parameter such as linearity was also evaluated. The linear range extend from 30 to 500ppb. The results of chlorinated solvents and gasoline mixed samples showed that solvents have been completely removed from the sample preparation step and more accurated than those obtained by the other methods.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.210-210
• /
• 2003

휘스커상의 뮬라이트의 생성온도와 속도는 출발물질로 사용되는 알루미나와 실리카의 화학적 순도, 입자크기 그리고 결정형태에 의존하며, 알루미나와 실리카의 조성비에 따라 생성되는 뮬라이트의 형태가 변한다. 각 원료에 대한 반응성을 관찰하기 위하여 출발원료인 Al(OH)$_3$, 비정질 SiO$_2$, AlF$_3$를 혼합 각각 단일조성과 2상 및 3상의 원료를 혼합 분쇄하여 분무건조한 조립분말을 5$0^{\circ}C$ 구간으로 나누어 상온에서 130$0^{\circ}C$까지 튜브 로에서 열처리하였다. Al(OH)$_3$와 AlF$_3$를 단독으로 열처리하였을 경우에는 안정한 상태로 열처리가 진행되었으나, 혼합하였을 경우에는 40$0^{\circ}C$ 이상의 온도에서 서서히 반응하였다. 각 온도구간에서 열처리한 시편은 미세구조 관찰과 상분석을 통하여 플루오르 토파즈와 휘스커상의 뮬라이트의 생성을 관찰하였으며, 생성된 휘스커 뮬라이트는 조립의 형상을 원형대로 보존하였으며, 조립의 강도를 측정하기 위하여, 초음파 분산기와, 초음파 Homgeniger를 이용하여 처리한 결과 대부분 원래의 형상을 유지하였다.

• Rapid Communication in Photoscience
• /
• v.3 no.4
• /
• pp.76-78
• /
• 2014

Fluorescent nucleic acids were prepared utilizing the polymerase extension (PEX) reaction to incorporate fluorescent molecules. 2'-Deoxyuridine triphosphate (dUTP) derivatives possessing pyrene molecules as fluorophores were synthesized using the aqueous-phase Sonogashira coupling between 5-Iodo-dUTP and acetylene-linked pyrene molecules. The incorporation of the pyrene (Py)-labeled deoxyuridine triphosphates (PyU) into DNA by polymerase was evaluated by polyacrylamide gel electrophoresis, demonstrating that the PyU can work as a good substrate for the PEX reaction. The fluorescent properties of the functionalized DNA prepared by the PEX reaction were characterized by steady-state fluorescence measurements. The Py-conjugated DNA showed typical emission spectra of the pyrene, and the DNA with two pyrene molecules connected to each other by a diethylene glycol linker exhibited a broadened emission attributed to the electronic interaction between the Py molecules.