• Journal of Korean Association for Spatial Structures
• /
• v.17 no.1
• /
• pp.77-84
• /
• 2017

Vortex-induced vibration and instability vibration of tall buildings are very important fluid-structure interaction phenomenon, and many fundamental questions concerning the influence of body movement on the unsteady aerodynamic force remain unanswered. For tall buildings, there are two experimental methods to investigate the characteristics of unsteady aerodynamic forces, one is forced vibration method and the other is free vibration method. In the present paper, a free vibration method was used to investigate the unsteady aerodynamic force on tall building whose aspect ratio is 9 under boundary layer simulating city area. Wind pressures on surfaces and tip displacements were measured simultaneously, and the characteristics of tip displacements and generalized forces were discussed. It was found that variation of across-wind displacements showed different trend between the case when wind speed increases and wind speed decreases, and the fluctuating generalize forces in across-wind direction of vibrating model are larger than that of static model near the resonant wind speed and approach to the static value. And for higher wind speed range, there were two peaks in across-wind power spectra of generalize forces of vibrating model, which means that two frequency components are predominant in unsteady aerodynamic forces.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.417-422
• /
• 2010

Atmosphere Plasma of Gas Discharge (APGD) has been used in plasma sources for material processing such as etching, deposition, surface modification and so on due to having no thermal damages. The APGD researches on AC source with high frequency have been mainly processed. However, DC APGD studies have been not. In order to understand APGD further, it is necessary to study on fundamental properties of DC APGD. In this paper, we developed a one-dimensional fluid simulation model with capacitively coupled plasma chamber at the atmosphere pressure (760 [Torr]). Nine kinds of Ar discharge particles such as electron (e), positive ions ($Ar^+$, $Ar_2^+$) and neutral particles ($Ar_m^*$, $Ar_r^*$, $Ar_h^*$, $Ar_2^*$(1), $Ar_2^*$(3) and Ar gas) are considered in the computation. The simulation was worked at the current range of 1~15 [mA]. The characteristics of voltage-current were calculated and the structure of Joule heating were discussed. The spatial distributions of Ar DC APGD and the mechanism of power consumption were also investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.130-130
• /
• 2009

This paper describes the temperature characteristics of polycrystalline 3C-SiC micro resonators. The 1.2 ${\mu}m$ and 0.4 ${\mu}m$ thick polycrystalline 3C-SiC cantilever and doubly clamped beam resonators with 60 ~ 100 ${\mu}m$ lengths were fabricated using a surface micromachining technique. Polycrystalline 3C-SiC micro resonators were actuated by piezoelectric element and their fundamental resonance was measured by a laser vibrometer in vacuum at temperature range of $25{\sim}200^{\circ}C$. The TCF(Temperature Coefficient of Frequency) of 60, 80 and 100 ${\mu}m$ long cantilever resonators were -9.79, -7.72 and -8.0 $ppm/^{\circ}C$. On the other hand, TCF of 60, 80 and 100 ${\mu}m$ long doubly clamped beam resonators were -15.74, -12.55 and -8.35 $ppm/^{\circ}C$. Therefore, polycrystalline 3C-SiC resonators are suitable with RF MEMS devices and bio/chemical sensor applications in harsh environments.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.1-17
• /
• 2007

The purpose of this study was to provide for the useful fundamental data to enterprise which produces the natural-dyed clothing products by investigating with the holding conditions and pursuit of wearing images. The subjects were females aged 20 to 59, a questionnaire was developed by the researcher and distributed to 237 females. A sample of 223 females responded to the questionnaire. Data analyses were processed by SPSS WIN 10.0 Program; Frequency count and percentage, $X^2-test$, ANOVA and Duncan's multiple range test were used for statistical analysis. The results of this study were as follows: First, there were significant differences in holding items, period and private ownership according to age, any academic background and a monthly income. Second, the result by classification of the pursuit of wearing images could be identified four factors: factor 1) sexual and feminine image, factor 2) simple and common image, factor 3) comfortable and natural image and factor 4) dynamic image.

• Journal of Korean Home Economics Education Association
• /
• v.11 no.1
• /
• pp.1-11
• /
• 1999

The purpose of this study were to analyze high school girls’sex role identity and underwear purchasing behaviors, and to provide the educational guidelines for high school girls as a underwear comsumer and the fundamental data necessary for the products planning of underwear manufacturing companies. The questionnaire was composed of questions about the types of sex role identity, pursuit factors and purchasing behaviors of underwear. The respondents were girls from 6 high schools in cities in Chonbuk Province. The questionnaires were collected from April 6th to May 12th in 1998. 510 questionnaires were used for data analysis. Frequency, percent, average, standard deviation, F-test, $$\chi$^2$-test, and Duncan’s multiple range test were followed. The results of this study were as follows：1. Among the sex role identity groups, the androgynous group was the largest, and the masculine group was the smallest among high school girls. 2. High school girls sought after practicality most when purchasing underwears, but sought after the brand least. The androgynous group recognized practicality, aesthetics, and sexual attraction most, but the undifferentiated group recognized them least. 3. The high school girls bought underwears objectively when they were worn out, made use of TV, newspaper, and radio advertisements as the information sources, and considered the size, comfort, and style. They recognized the prices of underwears as moderate. They depended on their mother most when purchasing underwears and reflected their dependents opinion on selecting underwears partially. They purchased at the underwear specialty store.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.4
• /
• pp.314-317
• /
• 2009

This paper describes the temperature characteristics of polycrystalline 3C-SiC micro resonators. The $1.2{\mu}m$ and $0.4{\mu}m$ thick polycrystalline 3C-SiC cantilever and doubly clamped beam resonators with $60{\sim}100{\mu}m$ lengths were fabricated using a surface micromachining technique. Polycrystalline 3C-SiC micro resonators were actuated by piezoelectric element and their fundamental resonance was measured by a laser vibrometer in vacuum at temperature range of $25{\sim}200^{\circ}C$. The TCF(Temperature Coefficient of Frequency) of 60, 80 and 100 On long cantilever resonators were -9.79, -7.72 and -8.0 ppm/$^{\circ}C$. On the other hand, TCF of 60, 80 and $100{\mu}m$ long doubly clamped beam resonators were -15.74, -12.55 and -8.35 ppm/$^{\circ}C$. Therefore, polycrystalline 3C-SiC resonators are suitable with RF MEMS devices and bio/chemical sensor applications in harsh environments.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.493-496
• /
• 2005

For home healthcare, the unconstrained measurement of physiological signal is highly required to avoid the inconvenience of users. The recording and analysis of the fundamental parameters during sleep like respiration and heart beat provide valuable information on his/her healthcare. Using the air mattress sensor system, the respiration and heart beat movements can be measured without any harness or sensor on the subject's body. The differential measurement technique between two air cells is adopted to enhance the sensitivity. The balancing tube between two air cells is used to increase the robustness against postural changes during the measurement period. The meaningful frequency range could be selected by the pneumatic filter with balancing tube. ECG (Electrocardiography) and respiration sensor (plethysmography) were measured for comparison with the signal from air mattress. To extract the heart beat information from air pressure sensor, digital signal processing technique was used. The accuracy for breathing interval and heart beat monitoring was acceptable. It shows the potentials of air mattress sensor system to be the unconstrained home sleep monitoring system.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.894-903
• /
• 2019

An approach for collapse risk assessment is proposed to evaluate the vulnerability of electric cabinet in nuclear power plants. The lognormal approaches, namely maximum likelihood estimation and linear regression, are introduced to establish the fragility curves. These two fragility analyses are applied for the numerical models of cabinets considering various boundary conditions, which are expressed by representing restrained and anchored models at the base. The models have been built and verified using the system identification (SI) technique. The fundamental frequency of the electric cabinet is sensitive because of many attached devices. To bypass this complex problem, the average spectral acceleration $S_{\bar{a}}$ in the range of period that cover the first mode period is chosen as an intensity measure on the fragility function. The nonlinear time history analyses for cabinet are conducted using a suite of 40 ground motions. The obtained curves with different approaches are compared, and the variability of risk assessment is evaluated for restrained and anchored models. The fragility curves obtained for anchored model are found to be closer each other, compared to the fragility curves for restrained model. It is also found that the support boundary conditions played a significant role in acceleration response of cabinet.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.9
• /
• pp.826-834
• /
• 2007

A 7K60MC-S low speed diesel engine in a power plant has frequently experienced high vibration since the unit completed construction works. Up to date, no fundamental vibration solutions were reached. Hence, several vibration tests and analyses were conducted to identify the root cause of this high vibration and to suggest the optimal countermeasures for diesel engine. The 9.25 Hz and 25.4 Hz vibrations have been observed on main body during operation. The magnitude of engine upper structural vibration is generally similar in horizontal transverse direction. However, differences in the 'Fore' and 'After' vibration magnitude with the same vibration phase angle at 9.25 Hz occur due to the explosion pulsations of 7 cylinders and the Inertia momentum added by the SCR (selective catalytic reduction) duct system. It was analyzed that the excess structural vibration occurred when the natural frequency of engine body is affected by the exciting sources due to the explosion pressure and the discharge pulsation of the seven cylinders in resonance range.

• Journal of Korean Home Economics Education Association
• /
• v.10 no.2
• /
• pp.1-11
• /
• 1998

The purpose of this study is to analyze highschool girls' concerns about environmental problems after investigating the actual state of environmental education and to suggest some fundamental changes in the Home Economics classes to improve environmental education. The sample was selected form high school girl students in Kyounggi Province between September 16 and September 26, 1996. Eight hundred twenty (820) first and second grade respondents were used. The data were analyzed by frequency, mean, percentile, factor analysis. Duncan's Multiple Range Test, and Stepwise Multiple Regression. Based on the major findings, the most influential variable was parental attitudes towards environmental conservation and problem. Next in influence was the environmental education provided in Home Economics classes. Also important were the individual student's interest in Home Economics classes, and her belief in the utility of environmental conservation in everyday life. The research conclusions are as follows: 1. We'll find how to relate efficiently the environmental education with everyday life by analyzing thoroughly the text of home economics. 2. We'll develop how to educate students parents properly because parental attitudes to wards the environmental problem have a great effect on students' behaviors. 3. We'll ceinforce environmental education by developing problems, and to motivate them to take real action in the area of environmental conservation.