• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.3
• /
• pp.8-13
• /
• 1989

The parameters of bipolar random square-wave signal process, amplitude and phase with unknown probability distribution are shown to be simultaneously estimated by using Gauss-Markov estimator so that transmitted digital data can be recovered under the additive Gaussinan noise environment. However, we see that the preprocessing stage using the correlator composed of the multiplier and the running integrator is needed to convert the received process into the sampled sequences and to obtain the observed data vectors, which can be used for Gauss-Markov estimation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.8
• /
• pp.572-579
• /
• 2003

By comparing the measured optical reflection spectra with calculated one by the transfer-matrix method (TMM) in epitaxial wafers for vertical-cavity surface-emitting lasers (VCSELs), we have estimated the systematic thickness errors in a simple and nondestructive way. The experimentally confirmed technique is based on the finding that the shape of the reflection spectra depends mainly on a newly defined single parameter, the effective error in the n-mirror layers, and the thickness error in the active cavity simply shifts the Fabry-Perot resonance wavelength. Also shown is that the proposed method is reliable when the relative standard deviation of the random thickness errors is less than 0.005. Because reflection spectra are routinely measured, we can easily estimate the thickness errors nondestructively with high spatial resolution.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.167-175
• /
• 2008

The current pre-distribution of secret keys uses a-composite random key and it randomly allocates keys. But there exists high probability not to be public-key among nodes and it is not efficient to find public-key because of the problem for time and energy consumption. We presents key establishment scheme designed to satisfy authentication and confidentiality, without the need of a key distribution center. Proposed scheme is scalable since every node only needs to hold a small number of keys independent of the network size, and it is resilient against node capture and replication due to the fact that keys are localized. In simulation result, we estimate process time of parameter used in proposed scheme and efficiency of Proposed scheme even if increase ECC key length.

• Transactions of the Society of Information Storage Systems
• /
• v.10 no.2
• /
• pp.50-54
• /
• 2014

Object image using DRPE(Double Random Phase Encryption) in 4f system is encrypted by space-division method using amplitude mask. However, this method has the weakness for the case of having partial data of amplitude mask which can access the original image. To improve the security, we propose the method using the 2-dimension logistic chaos function which shuffles the encrypted data. It is shown in simulation results that the proposed method is highly sensitive to chaos function parameters. To properly decrypt from shuffled encryption data, below 1e-5 % errors of each parameter should be required. Thus compared with conventional method the proposed shows the higher security level.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.528-533
• /
• 2010

This paper describes a calculation method of source level of a ship transient noise, which is one of the important elements for the ship detection. Aim of transient noise measurements is to evaluate of acoustic energy due to singular occurrence, which is therefore defined as non-periodic and short termed events like an attack periscope, a rudder and a torpedo door. In generally, in the case of randomly spaced impulse, the spectrum becomes a broadband random noise with no distinctive pattern. Therefore, frequency analysis is not particularly revealing for type of signal. In the paper, it is performed in time domain to analyze a transient noise. However, a source level of transient noise is required an investigation for multiple frequency band. So, in order to calculate a source level of transient noise, a design of exponential weighting function, convolution, band pass filtering, peak detection, root mean square, and parameter compensation are applied. The effectiveness of this calculation scheme is studied through computer simulations and a sea test. Furthermore, an application of the method is applied in a real case.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.11
• /
• pp.209-218
• /
• 2004

The purpose of this paper is to suggest a practical and simple method for the identification of the joint mechanical properties and to apply it to human knee joints. The passive moment at a joint was modeled by three mechanical parts, that is, a gravity term, a linear damper term and a nonlinear spring term. Passive pendulum tests were performed in 5 fat and 5 thin men. The data of pendulum test were used to identify the mechanical properties of joints through sequential quadratic programming (SQP) with random initial values. The identification was successful where the normalized root-mean-squared (RMS) errors between the simulated and experimental joint angle trajectories were less than 10％. The parameter values of mechanical properties obtained in this study agreed with literature. The inertia, gravity and the damping constant were greater at fat men, which indicates more resistance to body movement and more energy consumption fer fat men. The suggested method is noninvasive and requires simple setup and short measurement time. It is expected to be useful in the evaluation of joint pathologies.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.5
• /
• pp.1016-1025
• /
• 1988

A force cancelling observed to control the vibration of a single degree of freedom elastic system subjected to an arbitrary, unmeasurable disturbance is considered in this paper. The main idea of a force cancelling observer is how an estimate of the excitation can be derived and used to generate a control force which reduces the vibration. This control is shown to be robust with respect to the parameters describing the behavior of the system. Experimental and numerical results are presented which show the efficacy of the observer when the system is excited by periodic, random, and impulsive torques.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.515-517
• /
• 2003

In this paper we examine the effects of the required portions of guard timing spaces in a MAC frame of ETSI BRAN HIPERLAN/2 system such as inter-mobile guard timing space in UL(Up Link) duration, inter-RCH(Random CHannel) guard timing space, sector switch guard timing space. In particular, we calculate the number of OFDM(Orthogonal Frequency Division Multiplexing) symbols required for these guard timing spaces in a MAC frame. We them evaluate the throughput of HIPERLAN/2 system as we vary parameter such as the guard time values defined in [2], the number of DLCCs(Data Link Control Connections), and the number of RCHs. Finally we show by numerical results that the portions for the 새심 summation of required guard timing spaces in a MAC frame are not negligible, and that they should be properly considered when trying to evaluate the performance of MAC protocol of HIPERLAN/2 system and also when determining the number of RCHs as well as the number of DLCCs in UL PDU trains at an AP/CC(Access Point/Central Controller).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.4
• /
• pp.89-95
• /
• 2003

In this paper, an algorithm to locate and size damage in a complex truss structure using the time domain response is presented. Sampled response data for specific time interval is spatially expanded over the structure to obtain the mean train energy for each element of the structure. The mean strain energy for each element is, in turn, used to build a damage index that represents the ratio of the stiffness parameter of the pre-damaged to the post-damaged structure. The validity of the methodology is demonstrated using data from a numerical example of a space truss structure with simulated damage. Also in the example, the effects of noisy data on the proposed algorithm are examined by adding random noised to the response data.

• Structural Monitoring and Maintenance
• /
• v.2 no.2
• /
• pp.165-180
• /
• 2015

In this paper lead zirconate titanate transducers (PZT) are employed for damage detection of four reinforced concrete (RC) column specimens retrofitted with carbon fiber reinforced polymer (CFRP) jackets. A major disadvantage of FRP jacketing in RC members is the inability to inspect visually if the concrete substrate is damaged and in such case to estimate the extent of damage. The parameter measured during uniaxial compression tests at random times for known strain values is the real part of the complex number of the Electromechanical Admittance (Conductance) of the sensors, obtained by a PXI platform. The transducers are placed in specific positions along the height of the columns for detecting the damage in different positions and carrying out conclusions for the variation of the Conductance in relation to the position the failure occurred. The quantification of the damage at the concrete substrate is achieved with the use of the root-mean-square-deviation (RMSD) index, which is evaluated for the corresponding strain values. The experimental results provide evidence that PZT transducers are sensitive to damage detection from an early stage of the experiment and that the use of PZT sensors for monitoring and detecting the damage of FRP-retrofitted reinforced concrete members, by using the Electromechanical Admittance (EMA) approach, can be a highly promising method.