• 한국대기환경학회지
• /
• 제25권3호
• /
• pp.237-247
• /
• 2009

The combustion characteristics of car components have been investigated, The combustion parameters like heat release rate, smoke production, yield of carbon dioxide and carbon monoxide and mass loss rate were analyzed by cone-calorimeter for representative samples (seat, carpet, headrest, rubber mat, dash board and electric wire) collected from a used car. The results from sample combustion showed that cover and sponge in seat more quickly ignited and flamed than other parts. The heat released from the combustion of dash board sample was 144.29$kw/m^2$ and the smoke produced by the wire combustion was 6896.4 $m^2/m^2$. The yields of carbon dioxide and carbon monoxide were in the ranges of 1.09${\sim}$2.76 kg/kg and 0.0262${\sim}$0.1008 kg/kg, respectively.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.100-105
• /
• 2007

Signalling equipments at railroad sites are widely exposed to high voltage lightning surges. This paper presents a lightning protection system for the signalling equipments at subway car depots. The main features of the system are as follows : (1)the common grounding system between power system grounds and the signaling system grounds, (2)physical and chemical methods to reduce grounding resistivity, (3)rearrangement of lightning rods based on the rolling bal1 theory, (4)equi-potential bonding networks to minimize the potential differences between the equipments grounds. The system has been constructed at six subway car depots in Seoul metropolitan area and it is measured that the grounding resistivity are reduced to 0.266 ohms and the potential differences between devices are reduced to a negligible quantity. After the construction of the systems, it has not been reported the break-down of the signalling equipments caused by lighting surges.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.888-893
• /
• 2000

This experimental study is the improvement of running stability for freight car. KNR (Korean National Railroad)'s conventional wagons, light bodies running on Barber style bogies with 5-1/$2{\times}10$ journals, would be considered fundamentally to be a most difficult car to control above 100km/h. From the results of experiment, to permit high speed operation safely, was realized with the resilient side bearing. Also, equipped with resilient side bearing, and elastowedge friction elements to eliminate bolster wedge pocket wear, KNR's wagons can be secure the running stability with lower maintenance requirements than current experience.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.865-872
• /
• 2009

철도차량의 화재안전성능을 향상시키기 위해 최근 성능평가 방법의 도입을 추진하고 있으며, 피난도 큰 부분을 차지하고 있다. 그런데 철도는 공공교통수단이므로 평가에 교통약자를 포함해야 하지만, 일반적으로 피난에 관한 평가를 수행할 경우 대부분의 경우가 교통약자들을 고려하고 있지 않은 것이 현실이다. 장애인중 보행이 어려운 지체장애인의 화재 시 철도차량에서의 피난에 대한 실험을 수행해보았다. 철도차량으로는 현재 운행 중인 새마을과 무궁화를 대상으로 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2139-2144
• /
• 2008

There are eight kinds of railroad vehicles such as KTX, PP(Push-Pull), NEL(New Electric Locomotive), EL(Electric Locomotive), DL(Diesel Locomotive), CDC(Commuter's Diesel Car), VVVF(Variable Voltage Variable Frequency) and Resistance Control Car that Korail corporation presently runs, and a variety of vehicles just like EMU(Electric Multiple Unit) and DMU(Diesel Multiple Unit) currently developed and accepted are running in the near future. However, There is still no design standard of the control stand of cockpit and the same compatibility of forms and control unit arrangements for locomotive engineers because no one has tried to approach in an ergonomic way. It can cause Locomotive engineers to make errors using the machinery. when the new vehicles are adopted, The efficiency of operation will quite fall down due to the separate training of the engineers. Therefore, We'd like to improve the accuracy of manipulating the machinery used by the engineers at all times according to the design standard of ergonomic technology and safety engineering and increase the operational efficiency and the safety of railroad vehicles in order to handle the problems as quickly as we can in an emergent situation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.897-901
• /
• 2005

21 century as the knowledge information anger society now our society industry of all fields the rolling stock maintenance conservative standardization enterprise where information anger is being turning out construction Ministry of Transportation supported with continuous development of the supply section substitution quantity information processing system which the information highway is quick and the Korean railroad technical research worker propelled the enterprise as the subjective agency, it contracted this for a vehicle field information anger system construction in link of the enterprise our construction and an agreement, information technique composed the consortium t9day and it propelled a system codevelopment. The SMSC who is a front-runner of Maj loach city railroad operation agency to 'here business relates with a vehicle field maintenance conservativeness an immediacy operation and generally and information anger it will plan it will integrate it will own jointly and business efficiency and in the dictionary an obstacle occurrence electromotive car maintenance conservative information and it will improve only maintenance conservativeness of preventive maintenance of the electromotive car it knows it will prevent to construct the maintenance conservative system of the preventive maintenance, it applied the RIMS project to sleep.

• 한국정밀공학회지
• /
• 제33권9호
• /
• pp.739-744
• /
• 2016

The truck that is used as running equipment for tank freight car support is a core structural part that supports the load of the car body and significantly influences the safety of freights and vehicles, as well as their running performance. Running equipment is composed of truck frames, wheels and wheel axles, independent suspensions, and brakes. Among these components, the truck frame supporting the load of the vehicles and freights may be the most important component. This study was carried out to analyze the structure of truck frames and to determine whether they are safe when the maximum vertical load, braking part load, and the front and rear load are applied to truck frames. This was achieved by subjecting the truck frames to stress tests and then measuring the stress on each part. The results of the stress tests showed that truck frames have a safe vehicle load design.

• 한국철도학회논문집
• /
• 제18권4호
• /
• pp.309-316
• /
• 2015

고속열차의 외부장치인 선두부 대차 페어링과 팬터그래프에 의한 주행저항 기여도를 차세대 한국형 고속열차(HEMU-430X)를 이용하여 최대 350km/h까지의 타행시험을 통하여 간접적으로 평가하였다. 선두부 대차페어링에 의한 공기저항 저감도를 평가하기 위하여 대차 페어링을 부착 및 탈착 하였을 때 각각 타행시험을 속도대역별로 실시하였다. 또한, 팬터그래프에 의한 공기저항을 측정하기 위하여 팬터그래프를 상승 및 하강 시켰을 때 각각 타행시험을 실시하였다. 타행시험의 결과로부터 시간-속도선도에 대한 가속도를 선형회귀법으로 산출하여 주행저항식으로 도출하였고, 도출된 주행저항식의 공기저항계수 부분을 이용하여 대차 페어링 및 팬터그래프의 공기저항 기여도를 산출하였다. 그 결과 선두부 대차 페어링의 공기저항 감소효과는 약 3.8%이며, 비상모드 팬터그래프는 공기저항을 약 3.9% 증가시키는 것으로 평가되었다.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.224-228
• /
• 2017

Recently, in order to improve the efficiency of freight transportation on existing lines, a new freight train model is needed to develop urgently. The weight balance of the cargo for the freight vehicle is very important for the stability of the running train and the safe transportation of the cargo. For achieving the cargo weight balance, we proposed a Cargo Balancing Control(CBC) system on the Freight vehicle equipped in between under frame of car body and bogie system. The Cargo Safety Monitoring(CSM) system was designed to supervise status of the Cargo on freight train. The monitoring system can display real time status data from sensors and various signals effectively. We suggested that this paper is a very useful approach for keeping the safety of running freight trains on existing lines.

• 전기학회논문지
• /
• 제64권9호
• /
• pp.1406-1410
• /
• 2015

The railway catenary systems consist of a complex structure, electrical and mechanical conditions are exposed to dangerous environment due to current collection between pantograph and catenary systems. These two types of conditions for the catenary systems are critically assessed for management and are becoming increasingly more dependent on reliable inspection system. In this paper, a new measurement system which enables inspection of catenary faults was studied and implemented. The system uses wavelength band of ultraviolet (UV) and IR (Infrared) to measure the insulation of corona and temperature of catenary wire. In order to determine the sensitivity of implemented system, the performance test such as distance detection range of UV camera and temperature resolution of IR camera were conducted, respectively. The field test of development system was also conducted in metro and high-speed line using mobile type UV and IR multi-composited measurement systems.