Browse > Article
http://dx.doi.org/10.5572/KOSAE.2009.25.3.237

Combustion Characteristics of Car Components Using Cone-Calorimeter  

Park, Eun-Young (University of Science and Technology)
Park, Duck-Shin (Korea Railroad Research Institute)
Publication Information
Journal of Korean Society for Atmospheric Environment / v.25, no.3, 2009 , pp. 237-247 More about this Journal
Abstract
The combustion characteristics of car components have been investigated, The combustion parameters like heat release rate, smoke production, yield of carbon dioxide and carbon monoxide and mass loss rate were analyzed by cone-calorimeter for representative samples (seat, carpet, headrest, rubber mat, dash board and electric wire) collected from a used car. The results from sample combustion showed that cover and sponge in seat more quickly ignited and flamed than other parts. The heat released from the combustion of dash board sample was 144.29$kw/m^2$ and the smoke produced by the wire combustion was 6896.4 $m^2/m^2$. The yields of carbon dioxide and carbon monoxide were in the ranges of 1.09${\sim}$2.76 kg/kg and 0.0262${\sim}$0.1008 kg/kg, respectively.
Keywords
Vehicle; Fire; Combustion; Emission; Cone-calorimeter;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 박병현, 박덕신, 조영민, 박은영, 이철규(2005) 콘 칼로리미터를 이용한 바이오매스의 연소특성에 관한 연구(I) -단풍잎, 은행잎, 덤불, 솔잎에 대해서-, 한국대기환경학회지, 21(4), 459-469
2 소방방재청(2007) 2007년도전국화재발생현황분석결과
3 Ingason, H. and A. Lonnermark (2005) Heat release rates from heavy goods vehicle trailer fires in tunnels, Fire Safety Journal, 40, 646-668   DOI   ScienceOn
4 Kotresh, T.M., R. Indushekar, M.S. Subbulakshmi, S.N. Vijayalakshmi, A. Sl. Krishna Prasad, V.C. Padaki, and Ashwini K. Agrawal (2006) Effect of heat flux on the burning behaviour of foam and foam/Nomex III fabric combination in the cone calorimeter, Polymer Testing, 25, 744-757   DOI   ScienceOn
5 Lonnermark, A. and P. Blomqvist (2006) Emissions from an automobile fire, Chemosphere, 62, 1043-1056   DOI   ScienceOn
6 Nilsen, A.R. and T. Log (2009) Results from three models compared to full-scale tunnel fire tests, Fire Safety Journal, 44, 33-49S   DOI   ScienceOn
7 Persson, B. and M. Simonson (1998) Fire emissions into the atmosphere, Fire Technology, 34, 266-279   DOI   ScienceOn
8 Wichmann, H., W. Lorenz, and M. Bahadir (1995) Release of PCDD/F and PAH during vehicle fires in traffic tunnels, Chemosphere, 31, 2755-2766   DOI   ScienceOn
9 국토해양부(2008) 자동차안전기준에 관한 규칙, 국토해양부령 제87호 제57조(소화설비)
10 Bari, S. and J. Naser (2005) Simulation of smoke from a burning vehicle and pollution levels caused by traffic jam in a road tunnel, Tunnelling and Underground Space Technology, 20, 281-290   DOI   ScienceOn
11 Roh, J.S., S.S. Yang, H.S. Ryou, M.O. Yoon, and Y.T. Jeong (2008) An experimental study on the effect of ventilation velocity on burning rate in tunnel fires-heptane pool fire case, Building and Environment, 43, 1225-1231   DOI   ScienceOn
12 국토해양부(2007) 자동차 등록 현황, 국토해양부 자동차관리과
13 보험개발원(2007) 차량승객과 구조자에 대한 차량화재 위험(Motor Vehicles Fire-What is the risk to Occupants and Rescuers', Allianz'), 보험개발원 전문자료
14 이철규, 정우성, 이덕희(2004) 콘칼로리미터를 이용한 내장판용 복합재료의 화재특성, 한국철도학회논문집, 7, 55-59   과학기술학회마을
15 Carvel, R.O., A.N. Beard, P.W. Jowitt, and D.D. Drysdale (2001) Variation of heat release rate with forced longitudinal ventilation for vehicle fires in tunnels, Fire Safety Journal, 36, 569-596   DOI   ScienceOn