• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.265-272
• /
• 1998

In this paper, the intoner noise reduction for subway railroad vehicles was studied by improving transmission loss of carbody panels and side doors, and on-line tests were conducted to examine the exterior noise levels at various running conditions. Also the transmission loss for design candidates of the carbody specimen was measured in two reverberation rooms. From the results of the tests, side door gap is the most dominant factor affecting the Interior noise level of subway railroad cars with a sliding typed side door. The next one is revealed to transmission loss of a floor panel. To improve the transmission loss of the carbody, many activities were conducted such as, treatment of resilient and sound-absorbing materials and reducing the gap of the side door by adopting a brush and rubber, etc. The estimated interior noise level for modified car which is designed with improved carbody panels is lower than original car by about 5㏈.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.317-329
• /
• 2002

This report was studied about system design of tilting car for speed up for conventional railroad of KNR. The maximum operating speed of Kyun-Pu line was recorded a 140km/h by saemaul train at 1985 and the average speed its is 107km/h now. The chungang line, janghang line and honam line of KNR had rebuilt to the electrified line for operation of tilting train. This report was described about the operation status of advanced countries, the operation situation of trains of KNR, system design for operation and speed up by EMU tilting train on the conventional railroad in the future.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.62-65
• /
• 2006

From the research which it sees it tried to observe from the comfort viewpoint where the passenger feels the high-speed railway car safety standard which it is see clearly from the domestic railroad safety law. It presents a minimum safety standard, the passengers being an safety most, the place where to sleep receive the service which is comfortable from the railroad safety law and they do there is a most big difference. It analyzed the correlation of the comfort where the passenger feels the vehicle efficiency standard which it is presenting from railroad safety law 59th clause and from the research which it sees consequently.

• Tribology and Lubricants
• /
• v.22 no.2
• /
• pp.87-92
• /
• 2006

In tread brake of freight cars, brake force is produced by the friction between the wheel and the brake shoe. Friction coefficients associated with the brake power, weight variation and brake shoe types should be sensitively treated as the design parameters. The conditions of the car, empty and loaded, should also be taken into consideration in brake force design and the control of brake force has some limitations in terms of the brake system design so that the brake friction materials selection should be considered as important measures to solve that difficulties. Friction characteristics of brake friction materials should remain within the range of maximum and minimum value and the friction performance should remain stable regardless of brake time and temperature. This study presented an experimental evaluation method to secure optimum brake performance by keeping safe brake effect and brake distance by the friction coefficient of the brake shoe of the freight cars.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1852-1857
• /
• 2007

Since the introduction of the subway, remarkable progress has been made so as to be able to produce a Korean standard electric car, but it is rather regretful that an engineer who is not aware of laws on a railroad or involved in a railroad designed a electric car. In the future, the electric cars with up-to-date technology must be introduced, but there are many difficulties in such introduction. For example, the operation of simultaneously moving and running scores of subway trains must comply with Regulation on Railroad Train Operation, so, close examination of these problems is required. The existing electric car, as does a motorcar, varies a little with makers in the type and characteristics. This paper is intended to discuss about the device and measures for reinforcing a function of Daewoo GEC electric car that was introduced by technical tie-up from England, which accounts for the most ratio in this field

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.521-523
• /
• 1997

In this paper, We carried out investigation of monitoring algorithm development for electric car inspection and repair. For transmitting a data, reliable RS-422 is adopted. The LabWindows/CVI development tool of National Instruments Co. is used for the formation of monitoring screen. The experimental set-up is composed of a PC to PC system. It is applicable to electric car imspection and repair.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.199-201
• /
• 2008

In this paper, We studied optimum service model of passenger car monitoring system at limited wireless bandwidth subway and railway. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. More bandwidth make receive sensitivity to bad. We deduced best bandwidth of subway wireless transmission system reflecting the cost of installation and efficiency of system. Consequently, we decide efficient service model of passenger car monitoring system.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.507-512
• /
• 2001

As needs for substitution of excessive road-oriented transport by the railroad increase, we proposed the guideline for development of the high speed freight car up to 150km/h through analyzing the critical speed of welded-type freight car employed and investigating the improvement in its maintenance. This study, the proper design parameters of conical rubber spring was determined to meet the vibration performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.9
• /
• pp.885-892
• /
• 2015

In this study, we simulate the railway crash accident that occurred at the Sangwangsimni station on the Seoul Metro Line #2, and we propose a solution to minimize the damage. We use LS-DYNA, which is the commercial software employed for collision analysis to perform 1-D and 3-D simulations for the recurrence of accidents. By performing 1-D simulations, we analyze the load, displacement, absorbed energy of the couplers, and acceleration of vehicles, and we evaluate the safety in accidental collisions. By performing 3-D simulations, we analyze the deformation of the car and over-ridding. We propose methods to improve the safety in collisions involving railway vehicles, and we perform collision accident simulations to determine improvements when applying a high-performance energy absorber to the front car.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.765-771
• /
• 2014

During the acceptance test of KTX, unexpectedly great lateral vibration in 14th~16th train at 150km/h~200km/h was appeared on a straight line in the winter season. Generally, stiffness of secondary suspension in KTX vehicle is one of the most sensitive components on air temperature. So, we examined that the secondary suspension to be mounted heating system was able to reduce the lateral vibration in the tail car of KTX. Also, we verified that lateral vibration from test results on KTX train with wheel conicity 1/20 disappeared. In this paper, we analysis effective reduction methods and the cause of the lateral vibration using model of KTX train and compare with the test results. The analysis results agree well with test ones. From mode analysis result, lateral vibration is occurred at natural frequency range 0.5~0.6Hz with a negative damping value and its natural frequency disappear gradually according to increasing of wheel concinicy.