• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.382-388
• /
• 2005

SMSC(Seoul Metropolitan Subway Corporation) is substantially taking the core role of mass transit system in Seoul Metropolitan area. When it was built, the design had challenged to sharp curved tracks less than 250m radius considering the protection of buildings and cultural properties as well as the connection to ground roads. Such circumstances have required a certain extent of slack in track geometry and therefore led to the construction of ballasted track with wooden sleepers. However, the dynamic force from running on sharp curved track has caused the misalignment and abnormal failure of track geometry, and it has resulted in a frequent maintenance and repair works which require a lot of cost and manpower. In this paper, we present the construction case of maintenance-free track system by using of concrete sleeper and elastic rail fastening system to ensure the safety of both passengers and trains, and to contribute the effective maintenance for track facilities of SMSC.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.522-529
• /
• 2006

Running train is one of the most main factor for railway bridge vibration. The repeated forces with equidistant axles cause the magnification of dynamic responses which relates with maintenance of the track structure and structure-borne noises. The noise problem is one of the most important issues in services of light rail transit system which usually passes through towns. The noise of railway bridges can be divided into the noise from track-vehicle system and structure-borne noises. In the present study, The vibration and noise of the LRT bridge will be investigated with utilizing dynamics responses from moving train as input data for noise analysis.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1391-1393
• /
• 2004

This paper described the development of technology for LRT (Light Rail Transit) power system, which are sponsored by MOCT and supervised by KRRI. Especially, manufacture, interface between components and composition for DC Switchgear are focused. Most main components for DC switchgear(Protective Relay, HSCB, DS) are made by own. Also the type test report of international testing laboratory about the DC Switchgear based on IEC regulations is introduced. Finally the product will be proved based on field test.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.373-375
• /
• 2003

The subway, a typical electrified transit, is operated by the 1500 V DC-powered system with the overhead positive feeder and the rails negative return. This return path would bring about considerable stray current circuits, that is, from the bottom of rails to sell and then to the station ground, unless the rail-to-soil resistance is sufficiently high. The stray current can cause electrolytic corrosion of subway metallic structures and adjacent underground utilities. In this paper, we reports on-site investigation of the stray current condition, especially influenced by drainage method. The drainage method including both forced drainage and polarized drainage, extensively adopted as a countermeasure for electrolytic corrosion of underground pipelines, was found out to exert a harmful influence upon rail components as well as the pipelines.

• Journal of Korean Society of Transportation
• /
• v.12 no.3
• /
• pp.29-47
• /
• 1994

Although subway system continues to be the backbone of transportation systems in a city like Seoul, there will still be areas across the city where subway services are not avaliable. Interest has steadily grown to fill this missing routes in overall urban transportation system. Light Rail Transit (L.R.T) system has been recently thought to be an appropriate mode of transportation by businessmen, professionals and transportation industry. In this regards, the purpose of this study is to explore whether L.R.T can be a feasible form of urban rail mode in the context of Seoul. First, the study develops the mathematical models to derive optimum route networks and stations. Integer Programming is employed to determine whether alternative routes are financially viable from the viewpoint of revenue maximization principles. Second, mathematical models developed are applied to Yoido area in order to examine the validity of model structures. The models constructed turns out be capable of handling alternative routes and stations. Application of models are successfully carried out to derive financially feasible set of routes and stations.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.107-111
• /
• 2008

This paper presented a literature review and investigation analysis results of total 19 present guide book and provisions of maintenance and management system in existing railway bridges to development of urban maglev track structures inspection manual. This research carried out a cooperated research subject 3-1, development a design code and maintenance and management inspection manual for urban maglev track structures, of the Center for Urban Maglev Program. Three types of track structures were includes as a major analytical parameter together with railroad, high speed railroad, subway and light rail transit. Bridges were analyzed a general rules, investigation, evaluation, repair and strengthen method as a key aspect. And rail were analyzed examination and maintenance also. This analysis results show that the track structures evaluation are based on the test and examination results, and repaired or strengthened consideration of deterioration, track irregularity and materials according to provision requirements.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.632-642
• /
• 2007

Korea, a peninsular country with distances of approximate 840 kms south-north and 1,200 kms east-west, currently has only three types of rail transport mode in operation; high-speed KTX, regional railway and urban rapid rail transit. It is very unfortunate that there exists no mountain train system across the country yet, which could be able to contribute both to the promotion of tourism and to a higher affordability of public transport means in the city. This type of rail mode system is more desiring when taking account the fact that 75% of the land topographically belongs to mountainous area. With this background in mind, among others, it is suggested that a mountain train system be laid over the scenic Bukhan Mountain in Seoul linking Gupabal station in line 3 and Ssangmun station line 4. This project would surely require an advancing review on its feasibility and approving result.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.38-48
• /
• 2007

this paper analyses how much acceleration and deceleration of urban rail vehicle should be applied and how to choose an operation mode to minimize energy consumption when train runs between stations within the fixed operation time. The decided operation pattern satisfying the minimum energy consumption becomes a target trajectory and a basis for the controller design criteria. To make this goal it grasps the characteristics of urban rail vehicle, realize operation energy model of urban rail vehicle and verity the accuracy of embodied model the Matlab simulation with the same operation result of real route. It searches for operation pattern to minimize operation energy by changing the acceleration and deceleration on the imaginative route and proposes operation pattern minimizing energy consumption by applying real operation data between stations of Seoul Metropolitan Subway Line 6.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1736-1746
• /
• 2008

Because present road traffic reaches to the limitation of its faculty, Korean tilting train was developed to find the solution by increasing the speed of rail road. A tilting train can run on a curved rail at high speed so it improves a speed of a rail transit without constructing a new line. Only minimum modification is necessary for a existing line. According to above requirement, Korean tilting train was developed in 2007 and the try run has been executing since April, 2007 in order to validate its safety and reliability in a service lines. And this test and estimation will be completed in 2009. After completing a try run, main parts of tilting train will be studied again to commercialize and localize including a bogie and its commercial model design will be finalized by 2012. In order to achieve the development target as mentioned above, the study have been done to improve the bogie system. As the first step to design commercialized bogie system, measurements from the try run and a dynamic analysis were used to find problems of present bogie system well. So this project is performed to decide what parts of the bogie should be modified in basis of this result.

• Journal of the Korean Society for Railway
• /
• v.6 no.2
• /
• pp.22-32
• /
• 2003

차륜없이 전자석에 의해 부상하고, 리니어모터에 의해 추진하는 시스템이다. HSST의 가장 큰 장점은, 접촉지짖에 의한 저소음 및 공기저항외에는 주행저항이 없기 때문에 고속주행이 가능하다. HSST도 당초에는 최고속도 200∼300km/h 정도의 시스템 HSST-200, HSST-300 타입을 목표로 개발을 진행해왔지만, 최근에는 급구배 및 급곡선 통과가 가능한 특성을 활용하여 도시내 교통을 대상으로 하는 최고속도 100km/h 정도의 시스템 HSST-100 타입 개발에도 주력함으로써 실용화에 달하고 있다. 경량전철로서의 취급하고 있는 시스템은 HSST-100 타입이다.(중략)