• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.105-113
• /
• 2009

The performance of a direct-injection type diesel engine often depends on the strength of swirl or squish, shape of combustion chamber, the number of nozzle holes, etc. This is of course because the combustion in the cylinder was affected by the mixture formation process. In this paper, combustion process of biodiesel fuel was studied by employing the piston which has several grooves with inclined plane on the piston crown to generate swirl during the compression stroke in the cylinder in order to improve the atomization of high viscosity fuel such as biodiesel fuel and toroidal type piston generally used in high speed diesel engine. To take a photograph of flame, single cylinder, four stroke diesel engine was remodeled into two stroke visible engine and high speed video camera was used. The results obtained are summarized as follows; (1) In the case of toroidal piston, when biodiesel fuel was supplied to plunger type injection system which has very low injection pressure as compared with common-rail injection system, the flame propagation speed was slowed and the maximum combustion pressure became lower. These phenomena became further aggravated as the fuel viscosity gets higher. (2) In the case of swirl groove piston, early stage of combustion such as rapid ignition timing and flame propagation was activated by intensifying the air flow in the cylinder. (3) Combustion process of biodiesel fuel was improved by the reason mentioned in paragraph (2) above. Consequently, the swirl grooves would also function to improve the combustion of high viscosity fuel.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.447-453
• /
• 2013

Since PSDs(Platform Screen Doors) are set up at many subway stations, their design related to safety has become gradually important. In particular, the interference check with a running railway vehicle is the most important of performance indices because the collision between PSDs and vehicles can be dangerous for passengers in the car and on platforms. When the train comes into a station with a curvature, the passenger car has a large translational and rotational motion and the displacement is enough for coming in contact with PSD. The performance is affected by many design parameters such as rail design parameters and vehicle velocity. This study proposes dynamic analysis models for railway vehicles and rails. Some parameters were also considered in the models to determine their influence on the performance.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.223-233
• /
• 2017

The railway turnout system is one of the most important systems that set train routes. Turnout system integrity should be guaranteed for robust train operation. To diagnose the turnout system status, LVDT and accelerometers are installed on a turnout system in a high speed line. The LVDT and accelerometers produce signals containing physical meaning of the turnout systems. The LVDT produces the displacement of the rail gauge and vibration when point moving or a train passes on turnout systems and the accelerometer produces impact forces induced by wheel sets. We performed data extraction from the measured signals and parameterized the extracted signals into meaningful quantities. The parameters are used for classifying whether the turnout status is normal. We proposed two methods for the classification, one uses probabilistic distribution and the other artificial neuron networks. The probabilistic distribution is used for the parameter being classified by the quantities and the artificial neuron networks for the form classification. Finally, we show how to learn the normal status of a turnout system.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.647-655
• /
• 2016

The construction of high speed railways and improvement projects of for conventional railways require straight railway lines of railway, which leads to an increase of bridge and tunnel construction. Transition zones in railways means that the track support stiffness is variedvaries in over short ranges. Sspecial attention is required in theose transition zones since because instability of train running in train and irregularities of track irregularities are can frequently occurred. Typical transition zones are between bridges and earthworks and between tunnels and earthworks. On In a transition zone, a bridge abutment transition zone has many problems in with various causes. In this paper, fundamental problems of bridge abutment transition zones is are analyzed to enhance the understanding about of bridge abutment transition zones. Suggestions for improving problems in the transition zones are proposed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.703-711
• /
• 2018

Recently, as various metro lines have been constructed and connected to other lines the rate of utilization has also been increased. However, the existing fare policy which the government does still stick to causes not only inappropriate action to the demand pattern but aggravation of the profit of the operation company. This study reviewed rail fare policy of major countries such as Japan and U.K etc. to improve the rationality of fare policy in Korea. In order to systematical analysis of fare policy, such viewpoints as of fare decision method, the card fare discounting system, the structure of fare, and the government subsidy policy were reviewed. Based on the results from the review, various problems and improvement plans were drawn. Through this study, appropriate fare systems to urban railway users could be given to improve the chronic deficit problem of urban railway operators.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.703-709
• /
• 2013

Recently, the study on the commercialization technology of Rope Platform Screen Door (RPSD) is on the process. The study is specifically on RPSD, which the rope screen ascends to allow passage with securing safety of passenger and the condition of aboveground station. For this human-centered design of RPSD, it is important to present system technology. However, it is also necessary to scientifically measure and research the emotions, senses or minds of users in the future. Therefore, this study analyzed the human factors to be considered with designing the system on RPSD, which is installed in Nokdong Station on Gwangju Subway as a trial. Moreover, the emotional evaluation was done by analyzing the factors as how they are effected in general; it processed by checking whether it is safe, height of rope is stable, it has openness (pressure) or strong by examining the moments that a set of ropes blocks rail from platform, and when train is arrived.

• Journal of the Korean Society for Railway
• /
• v.18 no.2
• /
• pp.149-156
• /
• 2015

It is necessary to determine real path for urban railway users in order to allocate revenues between urban railway organizations. Out of several algorithms used to determine optimal routes, the k-path algorithm based on link-label has been utilized. However, this k-path algorithm has certain flaws. For example, optimal route can change depending on the travel and walking time, transfer penalty, and so on. Also, this algorithm cannot take into account the characteristics of users, who prefer express train to normal trains. In this paper, an algorithm is proposed to determine one single optimal route based on the traffic card data. This method also can search for an optimal path in conjunction with the railway timetable.

• Korean Journal of Agricultural Science
• /
• v.26 no.2
• /
• pp.116-129
• /
• 1999

The objectives of the study mainly concentrated on identifying the political implication on genetically modified crops considering production potentials and problems. It is found that the comprehensive evaluation of the genetically modified crops could not be concluded and compromised in a word on account of the polarization and parallelism of the positive and negative benefits of genetically modified crops just like as the rail way. The genetically modified crops will be contributed to solving the food shortage problems in the world, when the issues such as food safety, ecological disturbance and loss and degradation of biodiversity can be guaranteed in transparency. And when the trade morality of the multi-national enterprises be accepted by the genetically modified crops consumers, the potentiality of genetically modified crops will be realized greatly. By the way, the first problems will be expected to be solved by scientific development. If the food safety of the genetically modified technology be verified in transparency, it will be greatly contributed to solve food problems of human beings in the world. But the second problem could not be expected to be easily solved from the view point of capital property. In conclusion, the genetically modified technology will be made a severe sense of incongruity and a seed of fire on it will be remained persistently. According to the results based on the analysing the genetically modified crops potentiality and problems, it was identified that the ex-ante preparation of counter-measures and actions on it should be necessary. Accordingly this study has recommended that how and what the R&D policy on genetically modified crops be established and suggested how to carried out the industrial and economic policy together with international negotiation, and organizational and institutional rearrangement and etc.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.124-134
• /
• 2016

Research on low height noise barriers installed adjacent to railways to reduce the height of the noise barrier has actively progressed in many countries except Korea. The performance of low height noise barriers is evaluated to identify barrier acoustic characteristics using a scale model of the barrier in the present research. As shown in the experimental results, if it is considered the installation of 'ㄱ' type noise barrier, sound absorption material should be installed on both the top and the vertical surfaces of the barrier to improve insertion loss. Also, an analytical method such as the boundary element method, rather than a simple empirical equation, is required to evaluate the insertion loss of the barrier. In addition, noise level increase in passenger position is very small if a barrier with sound absorption material is installed. Finally, the two dimensional boundary element method is implemented to predict the acoustic characteristics of the low height barrier; the possibility of the application is confirmed from a comparison of the results of measurements and predictions.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.401-406
• /
• 2019

The three-dimensional precision numerical analysis was performed using the finite element model applied with the railway track model consisting of rails, sleepers, and track elastic springs(ballast, rail pad). As a result of analyzing the track deformation level of the existing tracks due to the excavation work adjacent to the railway facilities, it was found that the track irregularity evaluation criteria (allowed values) of both conventional and high-speed railways lines were satisfied. Based on the numerical analysis using the track model, it was analyzed that the results of the prediction of the track irregularity due to the excavation work and the level of the track deformation occurring at the actual site could be approximated as closely as possible.