• 한국광학회지
• /
• 제15권3호
• /
• pp.258-262
• /
• 2004

검출기의 분광감응도 표준으로부터 출발하여 SI 기본 단위의 하나인 칸델라(candela)눈금의 불확도는 복사계 개구의 면적 측정 불확도에 의해서 제한을 받는다. 칸델라 눈금을 새로 실현하기 위하여 다이아몬드 선삭가공기를 사용하여 개구의 가장자리가 칼날과 같도록 가공하였다. 이 개구를 디지털 되먹임 알고리듬을 채용한 x-y 이송대에 설치한 후, 출력이 안정화된 레이저 광선을 빔 허리가 5 $\mu\textrm{m}$ 이하가 되도록 집속시키고, 이송대를 이동하면서 개구의 가장자리 좌표를 칼날주사 방법으로 검출하였다. 이 좌표들을 지나는 최적의 타원을 최소 제곱법으로 결정하여 개구의 면적으로 구하였다. 측정 불확도를 분석한 결과 제작한 장치의 면적 측정의 상대 측정 표준 불확도(k=1)는 8${\times}$$10^{-5}$이다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.22-25
• /
• 2008

Aperture synthesis with platform motion has been presented as a useful tool to achieve the high spatial resolution imaging. Using a motion induced synthetic aperture radiometer (MISAR), a passive microwave image can be achieved with a small number of antennas. Moreover, the MISAR is capable of imaging better than the case without motion, using the same configuration of antenna array. With a platform motion, visibility can be sampled more efficiently, and as a result the imaging performance of the MISAR shows higher quality than the case without platform motion. In this paper, the advantage of MISAR is demonstrated experimentally. Using a laboratory model of inteferometric radiometer, the point source images are obtained under the condition with platform motion and without platform motion. In the experimental results, the point source response of the MISAR shows better quality of sidelobe level and beam efficiency than the case without platform motion.

• 한국대기환경학회지
• /
• 제22권6호
• /
• pp.940-953
• /
• 2006

The major source of carbon monoxide (CO) at the Earth's surface is the incomplete combustion of biomass and fossil fuels. Because the global lifetime of CO is about two months, it can be used as a tracer for pollution from anthropogenic activities and biomass hurtling. In this paper, we introduced the principle and algorithm of the Measurement of Pollution in the Troposphere (MOPITT) instrument for global CO monitoring. The MOPITT instrument, which was launched on the Satellite Terra in 1999, measures CO column and mixing ratio based on gas correlation radiometry. CO levels can be determined by a retrieval algorithm based on the maximum likelihood method minimizing the difference between observed and modeled radiances. MOPITT level 2 data (HDF format) can be downloaded through the Earth Observing System (EOS) data gateway of NASA. ASCII files of CO parameters can be extracted from HDF files, and then temporal and spatial distributions can be obtained. Finally, we showed an example of CO monitoring in April 2000. The locations of forest fires and distribution of MOPITT CO clearly indicated that not only anthropogenic emissions but also forest fires play an important role in CO levels and global CO distribution. Our introduction to MOPITT and the example of MOPITT data interpretation would be helpful for scientists who want to use the EOS data.

• 대한두개안면성형외과학회지
• /
• 제16권1호
• /
• pp.1-10
• /
• 2015

Facial symmetry is an important component of attractiveness. However, functional symmetry is favorable to aesthetic symmetry. In addition, fluctuating asymmetry is more natural and common, even if patients find such asymmetry to be noticeable. However, fluctuating asymmetry remains difficult to define. Several studies have shown that a certain level of asymmetry could generate an unfavorable image. A natural profile is favorable to perfect mirror-image profile, and images with canting and differences less than $3^{\circ}-4^{\circ}$ and 3-4 mm, respectively, are generally not recognized as asymmetry. In this study, a questionnaire survey among 434 medical students was used to evaluate photos of Asian women. The students preferred original images over mirror images. Facial asymmetry was noticed when the canting and difference were more than $3^{\circ}$ and 3 mm, respectively. When a certain level of asymmetry is recognizable, correcting it can help to improve social life and human relationships. Prior to any operation, the anatomical component for noticeable asymmetry should be understood, which can be divided into hard tissues and soft tissue. For diagnosis, two-and three-dimensional (3D) photogrammetry and radiometry are used, including photography, laser scanner, cephalometry, and 3D computed tomography.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2020년도 제62차 하계학술대회논문집 28권2호
• /
• pp.667-668
• /
• 2020

최근에는 범죄예방과 시설물 안전 및 출입관리, 화제예방 등 다양한 목적으로 감시카메라(CCTV)가 널리 보급되어 공공기관이나 상업시설 등 어느 곳에서나 찾을 수 있다. 이렇듯 많은곳에서 저마다의 이유로 사용되고 있는 감시카메라지만, 가장 흔하게 사용되는 이유는 범죄예방에 있다. 시설 내·외부에 감시카메라를 설치하여 도난사건 등을 사전에 방지하고 사후 증거확보에 유용하게 쓰일 수 있기 때문인데 문제는 감시카메라를 통해 사건을 사전에 방지하기 위해서는 실시간으로 사람이 카메라 영상을 지켜보고 있어야 한다. 하지만 사람이 항상 감시할수있을수는 없기 때문에 예방보다는 사후 증거확보를 위해 사용되는 실정이다. 즉 대부분의 감시카메라가 본래의 역할에 절반밖에 하지 못하고 있다는 것이다. 본 과제는 이러한 문제점을 해결하기 위해 감시카메라 자체의 기능을 추가하여 감시카메라가 인력을 필요로 하지않고 스스로 본래의 역할을 다할수있게 할 것이다.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권3호
• /
• pp.386-397
• /
• 2012

The stability and structure of bluff-body stabilized hydrogen flames were investigated numerically and experimentally. The velocity of coflowing air was varied from subsonic velocity to a supersonic velocity of Mach 1.8. OH PLIF images and Schlieren images were used for analysis. Flame regimes were used to classify the characteristic flame modes according to the variation of the fuel-air velocity ratio, into jet-like flame, central-jet-dominated flame, and recirculation zone flame. Stability curves were drawn to find the blowout regimes and to show the improvement in flame stability with increasing lip thickness of the fuel tube, which acts as a bluff-body. These curves collapse to a single line when the blowout curves are normalized by the size of the bluff-body. The variation of flame length with the increase in air flow rate was also investigated. In the subsonic coflow condition, the flame length decreased significantly, but in the supersonic coflow condition, the flame length increased slowly and finally reached a near-constant value. This phenomenon is attributed to the air-entrainment of subsonic flow and the compressibility effect of supersonic flow. The closed-tip recirculation zone flames in supersonic coflow had a reacting core in the partially premixed zone, where the fuel jet lost its momentum due to the high-pressure zone and followed the recirculation zone; this behavior resulted in the long characteristic time for the fuel-air mixing.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.216-219
• /
• 2004

In this study, the concept and techniques to generate the level lA, lB and 2A image products have been reviewed. In particular, radiometric and geometric corrections and bands registration used to generate level lA, lB and 2A products have been focused in this study. Radiometric correction is performed to take into account radiometric gain and offset calculated by compensating the detector response non-uniformity. And, in order to compensate satellite altitude, attitude, skew effects, earth rotation and earth curvature, some geometric parameters for geometric corrections are computed and applied. Bands registration process using the matching function between a geometry, which is called 'reference geometry', and another one which is corresponds to the image to be registered is applied to images in case of multi-spectral imaging mode. In order to generate level-lA image products, a simple radiometric processing is applied to a level-0 image. Level-lB image has the same radiometry correction as a level-lA image, but is also issued from some geometric corrections in order to compensate skew effects, Earth rotation effects and spectral misregistration. Level-2A image is generated using some geo-referencing parameters computed by ephemeris data, orbit attitudes and sensor angles. Level lA image is tested by visual analysis. The difference between distances calculated level 1 B image and distances of real coordinate is tested. Level 2A image is tested Using checking points.

• 한국광학회지
• /
• 제23권5호
• /
• pp.179-188
• /
• 2012

어안렌즈(fisheye lens)란 통상 초 광각의 시야각을 가지는 렌즈를 일컫는다. 초 광각의 시야각을 가지는 렌즈에서는 주변부시야각으로 갈수록 상의 조도가 급격히 저하하게 되는데, 본 논문에서는 이의 원인과 개선방안에 관해 논의한다. 왜냐하면 어안렌즈와 같은 초 광각의 렌즈에서는 기하광학적인 수차특성보다 오히려 시야각의 안정적인 확보가 광학적인 성능을 훨씬 더 좌우할 수 있기 때문이다. 그러므로 이를 위해, 먼저, 방향코사인벡터의 부호규약과 곡면 상에서의 법선벡터의 방향을 해석기하학적으로 다룬다. 이어서 해석기하학적인 논의를 바탕으로 조도저하의 다양한 원인들에 대해 수치 및 원리적인 분석을 실시하고, 개선에 대한 방안들을 제시한다.

• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.149-156
• /
• 2007

Purpose: The purpose of this study was to measure the absorbed dose and to calculate the effective dose for periapical radiography done by portable intraoral x-ray machines. Materials and Methods: 14 full mouth, upper posterior and lower posterior periapical radiographs were taken by wall-type 1 and portable type 3 intraoral x-ray machines. Thermoluminescent dosemeters were placed at 23 sites at the layers of the tissue-equivalent ART woman phantom for dosimetry. Average tissue absorbed dose and radiation weighted dose were calculated for each major anatomical site. Effective dose was calculated using 2005 ICRP tissue weighted factors. Results: On 14 full mouth periapical radiographs, the effective dose for wall-type x-ray machine was 30 Sv; for portable x-ray machines were 30 Sv, 22 Sv, 36 Sv. On upper posterior radiograph, the effective dose for wall-type x-ray machine was 4 Sv; for portable x-ray machines doses were 4 Sv, 3 Sv, 5 Sv. On lower posterior radiograph, the effective dose for wall type x-ray machine was 5 Sv; for portable x-ray machines doses were 4 Sv, 4 Sv, 5 Sv. Conclusion: Effective doses for periapical radiographs performed by portable intraoral x-ray machines were similar to doses for periapical radiographs taken by wall type intraoral x-ray machines.

• 한국광학회지
• /
• 제15권5호
• /
• pp.443-448
• /
• 2004

국제단위계 중의 하나인 칸델라 눈금을 두 개의 광도계를 사용하여 실현하였다. 광도계의 분광감응도는 광출력을 전기출력으로 치환하여 측정하는 극저온 절대복사계에 소급하여 측정하였다. 광도계 외부에 설치된 정밀 개구는 다이아몬드 회전가공기로 가공하였으며 그 면적은 불확도 0.05%(k = 1) 이내로 측정하였다. 이 광도계를 사용하여 광도 벤치 위에서 1 kW FEL 전구로 칸델라 단위를 실현할 때 불확도를 분광감응도, 감응도의 공간 균일도, 개구 면적, FEL 전구의 색온도와 위치 재현성을 고려하여 평가한 결과 0.25%(k = 1)를 얻었다. 실현한 눈금의 유효성을 확인하기 위하여 미국 NIST의 눈금과 비교한 결과 0.1% 이내에서 일치하였다.