• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.139-146
• /
• 2002

The third generation mobile communication needs to provide multimedia service with increased data rates. Thus an efficient allocation of radio and network resources is very important. This paper models the 'burst switching' as an efficient radio resource allocation scheme and the performance is compared to the circuit and packet switching. In burst switching, radio resource is allocated to a call for the duration of data bursts rather than an entire session or a single packet as in the case of circuit and packet switching. After a stream of data burst, if a packet does not arrive during timer2 value ($\tau_{2}$), the channel of physical layer is released and the call stays in suspended state. Again if a packet does not arrive for timerl value ($\tau_{1}$) in the suspended state, the upper layer is also released. Thus the two timer values to minimize the sum of access delay and queuing delay need to be determined. In this paper, we focus on the decision of $\tau_{2}$ which minimizes the access and queueing delay with the assumption that traffic arrivals follow Poison process. The simulation, however, is performed with Pareto distribution which well describes the bursty traffic. The computational results show that the delay and the packet loss probability by the burst switching is dramatically reduced compared to the packet switching.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.10a
• /
• pp.347-353
• /
• 2005

WiBro (Wireless Broadband Internet) system is going to be commercialized before long. The high portable internet system is abie to be connected to the high-speed internet using 2.3 CHz frequency bandwidth, anytime and anywhere. An effective scheduling for UCS, rtPS. nrtPS and BE requiring different QoS, which are service types of the WiBro, is necessary to increase the efficiency of radio channels that arc the limiting resource. This paper researches an uplink scheduling that plays a role in assignment for the radio channels from subscribers to base stations. The suggested scheduling provides priorities With each service type considering QoS of them but reserves some bandwidth for lower priory services. After deciding effective amount of bandwidth for reservation, we suggest analytical result on mean delayed time of packet transmission for each terminal, transmission rate for the data, and capacity for uplink. This research can be used as basic data for the standard in the high portable internet system and as data to predict the capacity of base stations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.943-946
• /
• 2005

As a proposed standard for radio resource measurement, 802.11k aims to provide key client feedback to WLAN access points and switches. The proposed standard defines a series of measurement requests and reports that detail Layer 1 and Layer 2 client statistics. In this paper, we analyze handoff processing time, radio specrum usage and handoff coverage using this scheme in home-network inter APs handoff.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.969-972
• /
• 2009

With the advent of the era of ubiquitous computing, the number of wireless communication devices has been exponentially increasing, which phenomenon requires for the preparation for the upcoming shortage of frequency resource. Recently, in consequence, the concept of Cognitive Radio (CR) was introduced in which the wireless nodes periodically recognize and learn the external conditions of communication including the usage of the frequency spectrum. It is essential to assure sufficient range of frequency to satisfy the users of the increasing wireless network devices. However, since not only the frequency band for wireless communication is finite, but most part of them had already been assigned for the primary users of the wireless network service, it is very difficult to ensure the band of frequency for additional communication service. In this contribution, we analyze and describe the issues of designing and implementation of CR networks.

• Journal of information and communication convergence engineering
• /
• v.15 no.1
• /
• pp.28-36
• /
• 2017

The medium access control (MAC) protocol based on dynamic time division multiple access/time division duplex (TDMA/TDD) is responsible for random access control and radio resource allocation in dynamic traffic environments. These functions of random access and resource allocation are very important to prevent wastage of resources and improve MAC performance according to various network conditions. In this paper, we propose new random access and resource allocation schemes to guarantee quality of service (QoS) and provide priority services in a dynamic TDMA/TDD system. First, for the QoS guarantee, we propose an adaptive random access and resource allocation scheme by introducing an access probability. Second, for providing priority service, we propose a priority-based random access and resource allocation scheme by extending the first adaptive scheme in both a centralized and a distributed manner. The analysis and simulation results show that the proposed MAC protocol outperforms the legacy MAC protocol using a simple binary exponential backoff algorithm, and provides good differential performance according to priorities with respect to the throughput and delay.

• Journal of electromagnetic engineering and science
• /
• v.3 no.2
• /
• pp.91-98
• /
• 2003

Software Communication Architecture(SCA) has been made to reduce the development period of new waveform applications by reusing design modules. Software Defined Radio(SDR) forum adopted SCA specification and follows its design concept. However, SCA specification does not describe interfaces and deployments of resources in details, which are software components, and how to implement them as well as how to communicate each other are another missing points in specification. In this paper, we propose a resource design methodology and details of adapter implementation for Core Framework(CF) that is a core set of open interface and services providing an abstraction of the underlying software and hardware layer. We also present SDR prototype system which communicates with resources implemented in different programming languages and processors in legacy environment through our design methodology.

• Journal of electromagnetic engineering and science
• /
• v.6 no.2
• /
• pp.117-122
• /
• 2006

This paper presents the impacts of Ultra-wideband(UWB) applied in the communication applications using frequency band from 3.1 GHz to 10.6 GHz on Broadband Wireless Access(BWA) based on orthogonal frequency division multiplexing(OFDM) using frequency band of 3.5 GHz. It proposes low duty cycle(LDC) for enabling UWB to mitigate strong interference to BWA. The effects of interference mitigation are evaluated and analyzed in the environment of UWB coexistence with BWA. UWB with LDC scheme will be given to bring higher transmit power level corresponding to Federal Communications Commission(FCC) provisional limit for enabling UWB operation at 3.5 GHz bands.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3435-3454
• /
• 2016

Device-to-device (D2D) communication is a potential solution to the incessant increase in data traffic on cellular networks. The greatest problem is how to control the interference between D2D users and cellular mobile users, and between D2D users themselves. This paper proposes a solution for this issue by putting the full control privilege in cellular network using the software-defined networking (SDN) concept. A software virtual switch called Open vSwitch and several components are integrated into mobile devices for data forwarding and radio resource mapping, whereas the control functions are executed in the cellular network via a SDN controller. This allows the network to assign radio resources for D2D communication directly, thus reducing interference. This solution also brings out many benefits, including resource efficiency, energy saving, topology flexibility, etc. The advantages and disadvantages of this architecture are analyzed by both a mathematical method and a simple implementation. The result shows that implementation of this solution in the next generation of cellular networks is feasible.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.474-479
• /
• 2003

We discussed the usage of a radio resource, the spectrum allocation and the trends of policy about 5㎓ band in other countries, We studied about the technical regulation on high speed wireless access system and the spectrum allocation of ISM bard in 5㎓ bard for other countries. We also analyzed the efficient use of radio resource, the method of frequency sharing and the calculation of spec01m requirement in noel to progress the high speed wireless access system In addition We proposed the schemes of domestic spectrum allocation for high speed wireless access system at 5㎓ band

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.205-206
• /
• 2008

We propose load balancing algorithm based on cross layer designing for MIMO OFDM system. When there are many users using data service, base station(BS) should distribute traffic. Moreover, cross layer design gives benefit managing radio resource and network bandwidth management. Proposed cross layer load balancing technique manages both BS's bandwidth allocation and MS’s power control. One BS request bandwidth to other BSes and other BSes reduce each bandwidth. And BSes reduce power of sub carriers for reserving available bandwidth of backhaul. MSes that didn't get service can be served by obtaining bandwidth from other BSes. The simulation result shows more users can be served and cell throughput was increased