본 논문에서는 근거리의 기계나 장치들을무선으로 원격 제어 하기 위한무선 데이터 통신용 송수신기 모듈을 설계하였다. 개발된 모률은 ISM 대역에서 424MHz 주파수를 이용하고, 153.6Kbps 의 전송속도로 데이터를 전송할 수 있다 . 모률에서 데이터를 전송할 때, 데이터를 인식하고 제어하기 위한 프로세서는 알테라사의 CPLD 칩을 사용 하여 VHDL로 프로그래ald하여 구현한다. 향후, 모률의 소형화와 높은 전송속도 등에 대한 연구를 계속하여 무선식별장치 (RFID) 기술에 적용할 것이다.
Journal of electromagnetic engineering and science
/
제8권3호
/
pp.114-118
/
2008
Direct-conversion RF front-end for 5-GHz WLAN is implemented in $0.18-{\mu}m$ CMOS technology. The front-end consists of a low noise amplifier, and low flicker noise down-conversion mixers. For the mixer, an inductor is included to resonate out parasitic tail capacitances in the transconductance stage at the operating frequency, thereby improves the flicker noise performance of the mixer, and the overall noise performance of the front-end. The receiver RF front-end has 6.5 dB noise figure, - 13 dBm input IP3, and voltage conversion gain of 20 dB with the power consumption of 30 mW.
In this paper, we present an implementation of Long Term Evolution (LTE) Uplink (UL) system on a Software Defined Radio (SDR) platform using a conventional Personal Computer (PC), which adopts Graphic Processing Units (GPU) and Universal Software Radio Peripheral2 (USRP2) with URSP Hardware Driver (UHD) for SDR software modem and Radio Frequency (RF) transceiver, respectively. We have adopted UHD because UHD provides flexibility in the design of transceiver chain. Also, Cognitive Radio (CR) engine have been implemented by using libraries from UHD. Meanwhile, we have implemented the software modem in our system on GPU which is suitable for parallel computing due to its powerful Arithmetic and Logic Units (ALUs). From our experiment tests, we have measured the total processing time for a single frame of both transmit and receive LTE UL data to find that it takes about 5.00ms and 6.78ms for transmit and receive, respectively. It particularly means that the implemented system is capable of real-time processing of all the baseband signal processing algorithms required for LTE UL system.
JSTS:Journal of Semiconductor Technology and Science
/
제11권4호
/
pp.295-301
/
2011
A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.
본 논문에서는 CQPSK(Compatible QPSK) 변조 방식을 이용하여 APCO P25 규격을 만족하는 직접 변환 방식 디지털 초협대역 무전기를 구현하였다. 초협대역화에 따른 DC-offset 및 AC-coupling 영향, CQPSK 변조 방식에 대한 전력 증폭기의 비선형 특성을 최소화하기 위한 무전기 RF 트랜시버 설계 및 제작 방안을 제시하였다. 직접 변환 방식 RE 트랜시버 및 DSP 모듈과의 연동 시험 결과 송신기의 경우 36.8 dBm의 PEP에서 FCC 방사 마스크 규격을 만족하였다. PWM 제어 신호에 의한 수신기 AGC 동작 범위는 40 dB 범위에서 선형적으로 동작 하였고, 수신 감도 레벨(-116 dBm)에서도 양호한 음성 통화가 가능하였다. 또한 입력 SNR에 따른 BER 성능 및 주파수 오프셋 변화에 대한 BER 성능 측정 결과 무전기 성능 요구 규격을 만족함을 확인하였다.
TO-can 레이저 다이오드를 사용한 광송수신기 모듈의 주파수 대역의 특성을 관찰하였다. 레이저 다이오드의 등가회로를 추출하기 위한 R-L-C변수는 임피던스 분석기를 이용하였다. 칩콘덴서를 사용하여 패키지내의 도선에 의한 인덕턴스 성분과의 임피던스 정합을 시도하였으나 저주파수 대역에서 공진으로 인한 경사가 발견되었다. 표면실장 형으로 소자를 구성하여 사용함으로써 공진주파수를 이동시켜 원하는 주파수 대역에서 공진 경사를 제거할 수 있었다.
A miniaturized CMOS bandpass filter for a single RF transceiver system is presented, using diagonally end-shorted coupled lines and lumped capacitors. In contrast to conventional miniaturized coupled line filters, it is proven that the effective permittivity variation of the coupled transmission line has no effect on shifting the center frequency when the bandpass filter is highly miniaturized. A bandpass filter at a center frequency of 2 GHz was fabricated by $0.18{\mu}m$ CMOS technology. The insertion loss with the die area of $1500{\mu}m{\times}1000{\mu}m$ is -5.14 dB. Simulated results are well agreed with the easurements. It also verify the center frequency stability in the compact size bandpass filter.
차세대 이동 통신 시스템을 위한 LTE-advanced(Long Term Evolution advanced)에서는 100 MHz의 대역폭과 1 Gbit/s의 전송 속도가 요구된다. 그러므로 사용 가능한 주파수의 확장을 위하여 최근 스펙트럼 집성 방법이 연구 되고 있다. 빈 주파수를 모아서 사용함으로 대역 효율이 증가한다. 그러나 송수신기는 Digital RF 및 SDR(Software Define Radio)기반의 수신기가 연구되고 있다. 그러므로 주파수 합성기와 증폭기는 광대역으로 동작하며 송수신기에서는 RF 불균형이 증가한다. LTE advanced의 상향 링크는 복수의 전력 증폭기를 사용하는 DFT-SOFDM이다. 그러나 위상 잡음과 직교 불균형이 포함된 수신기의 주파수 영역에서 ICI의 영향이 증가한다. 본 논문에서는 멀티 밴드 OFDM 시스템에서 위상 잡음과 직교 불균형을 고려하여 수신부의 주파수 영역에서 ICI(Inter Carrier Interference)의 영향을 분석한다. 또한, 상향 링크 시스템을 고려하여 주파수 영역에서 위상 잡음과 직교 불균형에 의한 영향을 분리하여 채널을 정확하게 추정하여 보상하고, 직교 불균형과 위상 잡음을 보상하는 방식을 제안한다. 제안된 방식을 사용하여 성능 개선이 2 dB 개선됨을 보였다.
본 논문에서는 RF(Radio Frequency) 회로의 구현 방법으로서 3차원 적층형태의 PAA(Pad Area Array) 패키지 구조를 제시하였다. 지능 교통망 시스템(Intelligence Traffic System)을 위한 224㎒의 RF 시스템을 적층형 PAA 패키지 구조에 적용시켜 구현하였다. 적층형 PAA 패키지 구성 과정에서는 RF 회로를 기능별, 주파수별로 분할하였고 3차원적인 적층형태의 PAA 구조로 설계한 후 분할된 단위 모듈의 RF 동작특성과 3차원 적층형 PAA 패키지 모듈의 전기적 특성을 개별적으로 분석하였다. 적층형 PAA RF 패키지가 갖는 연결단자인 공납(Solder Ball)에 대한 전기적 파라미터 측정결과 그 전기적 특성인 기생 캐패시턴스와 기생 인덕턴스는 각각 30fF, 120pH로 매우 미세하여 PAA 패키지 구조인 RF 시스템에 끼치는 영향이 무시될 수 있음을 확인하였고, 구성된 송수신단은 HP 4396B network/spectrum analyser로 측정한 결과 224㎒에서 수신단, 송신단 증폭이득은 각각 22dB 27dB. 나타나서 설계값에 비하여 3dB감소 된 것을 알 수 있었다. 이는 설계와 제작과정 사이의 차이로 판명되었으며 수동부품 보정방법을 통하여 각 단위모듈의 입출력 임피던스 정합을 이루어 각각 24dB, 29dB로 개선시킬 수 있었다. 따라서, 본 실험에서는 RF 회로를 기능별로 모듈화하고 3차원 적층형 PAA 패키지 구조로 구현하여 전기적 특성을 개선시킬 수 있음을 확인하였다.
본 논문에서는 시스템 온 칩 (SoC, System-on-Chip) 트랜시버에 적용이 가능하며. 저잡음 증폭기(LNA, Low Noise Amplifier)를 위한 자동 보상 회로 (ACC, automatic compensation circuit)를 제안한다. 개발된 회로는 고주파 내부 자체 검사 (BIST, Built-In Self-Test) 회로, 커패시터 미러 뱅크 (CMB, Capacitor Mirror Banks)와 디지털 처리장치로 구성되어 있다. 자동 보상 회로는 LNA가 정상 동작을 하지 않을 때 SoC 트랜시버의 구성요소인 디지털 프로세서를 이용하여 LNA가 정상 동작을 하도록 자동적으로 조정하는 역할을 한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.