• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1038-1045
• /
• 2010

The theory for a new electromagnetically biased combined radial and axial magnetic bearing is developed. This combined magnetic bearing uses two axial coils to provide the bias flux to the radial and axial air gaps of the combined bearing. One dimensional magnetic circuit model for this combined magnetic bearing is developed and analyzed such that flux densities and magnetic forces can be obtained. Three dimensional finite element model for the bearing is also developed and analyzed. Numerical analysis shows that the calculated magnetic forces from 1D model are well matched with those from the finite element model.

• Structural Engineering and Mechanics
• /
• 제81권5호
• /
• pp.607-616
• /
• 2022

In this work, the free vibration problem of a rotating Rayleigh beam is solved using the meshless Petrov-Galerkin method which is a truly meshless method. The Rayleigh beam includes rotatory inertia in addition to Euler-Bernoulli beam theory. The radial basis functions, which satisfy the Kronecker delta property, are used for the interpolation. The essential boundary conditions can be easily applied with radial basis functions. The results are obtained using six nodes within a subdomain. The results accurately match with the published literature. Also, the results with Euler-Bernoulli are obtained to compare the change in higher natural frequencies with change in the slenderness ratio (${\sqrt{A_0R^2/I_0}}$). The mass and stiffness matrices are derived where we get two stiffness matrices for the node and boundary respectively. The non-dimensional form is discussed as well.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.415-420
• /
• 2007

The objective of this study analyzes the influence of shimmy & shake phenomena due to tire design parameters which are RFV(radial force variation), DB(dynamic balance), RRO(radial run out) and air pressure. These parameters are inspection items for Q.C. after tires are manufactured. In order to analyze these parameters on this study, vehicle driving tests were achieved. The test modes are two type which are constant speed and coast-down driving. On this tests the dynamic characteristics of shimmy & shake are measured by the 3-axises accelerometers at the various positions that are knuckle(left & right), rack pinion, seat and steering wheel. In according to analyzed results, the longitudinal vibration of knuckle parts affects the lateral vibration of rack pinion and this vibration affects the lateral vibration of steering wheel that is the shimmy phenomena. Also the over and under DB by comparison with normal DB and the increment of RRO affect the occurrence of shimmy & shake phenomena.

• 한국소음진동공학회논문집
• /
• 제19권11호
• /
• pp.1133-1143
• /
• 2009

좁은 슬롯을 포함한 디스크 브레이크 로터의 소음 방사특성을 전산해석과 이론적 계산을 합성한 방법으로 검토하였다. 첫 단계로 로터와 기본 치수가 동일하고 동일한 슬롯을 보유한 후판 환형 디스크의 소음방사 특성을 유한요소해석을 구한 모달 진동 데이터를 바탕으로 기존의 해법을 이용하여 계산하고 수치해석결과로 검증하였다. 다음으로 이 결과를 유한요소해석으로 구한 샘플 로터의 고유진동 특성에 적용, 고유진동으로 인한 소음방사를 계산한 다음 그 결과를 경계요소법을 이용하여 검증하였다. 마지막으로 이 결과를 바탕으로 로터에 고정된 조화가진 및 로터 주위를 회전하는 조화력에 의해 방사되는 소음 및 진동 특성을 검토하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권3호
• /
• pp.353-361
• /
• 1998

The study on the vibration characteristics of annular sector plates is important for structural engineers. In this study the vibration modes and their natural frequencies of annular sector plates clamped along the inner circumferential edge are obtained by the time average holographic interferometer according to the varying sector angle. The experimental results agree well with those obtained by the numerical analysis. The vibration characteristics of annular sector plates shows great dependence on the sector angle. The radial nodal lines converge to the center of annular sector plate.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1023-1027
• /
• 2004

Since the change of the radial electromagnetic force is a main cause of noise and vibration of the SRM, this paper proposes a method to reduce the change of the electromagnetic force of an SRM. The technique is based on the control of the current shape associated with each phase using switches of the converter to drive an SRM. And we analyze the relation between the derivative of the radial electromagnetic force and the phase currents. A simulation is given to demonstrate our results.

• Journal of Electrical Engineering and Technology
• /
• 제7권5호
• /
• pp.753-758
• /
• 2012

This paper deals with the analysis of vibration and noise sources in a modular-type SPM fractional-slot motor. To reduce cogging torque, torque ripple and unequal radial force, which are the main causes of the electromagnetic vibration, the optimal shape of notch and magnet are designed.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.1-13
• /
• 1996

The measurement of radial directional natural frequency ina passenger car tire rotating under the load is studied. In order to obtain theoretical matural frequency and mode shape, the ploane vibration of a tire is modeled to that of circular beam. By esing the Tieking method based on Hamiltons's principle, theoretical results are determined by considering tension horce due to tire inflation pressure, retational velocity and tangential, radial stiffness. Radial directional modal parameters varying with the inflation pressure, load, rotational velocity are experimentally determined by using frequency response function method. The results show that experimental conditions canbe considered as the parameters which shift the natural frequency.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.49-56
• /
• 2000

Due to the rapid increase of long-distance transportation, particular attentions have been paid to truck tires, especially to their dynamic characteristics. In this research, experimental modal analysis on two kinds of light-duty truck tires, i.e., radial tire and bias tire, are performed by using GRFP(global rational fraction polynomial) method to investigate differences of the dynamic behavior of the two tires. The test results have shown that the modal frequencies of bias tire are much higher than the corresponding values of radial tire with a similar mode shape, which is in accordance with the fact that the radial rigidity of bias tire is higher than that of radial tire. And most of the modal decay rates of bias tire are larger than those of radial tire within the scope of this experiment. In the frequency domain range of test, the bias tire has extra modes, which do not occur in the radial tire. This difference is based on the fact that the circumferential rigidity of the bias tire is quire low whereas that of radial tire is so high that the frequencies of the corresponding modes are out of the frequency range of test.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.315-322
• /
• 2017

This study presents a novel two­phase eight stator poles and six rotor poles (8/6) switched reluctance machine (SRM) that can compensate for the vibration and noise problems of two­phase 6/3 SRM and compare the characteristics of two SRMs. In the case of two­phase 6/3 SRM, the short flux path and the flux direction inside the stator are not reversed, so they have high efficiency characteristics. However, the use of three rotor poles causes problems of vibration and noise because the radial force applied to the rotor poles is not balance. The proposed two­phase 8/6 SRM has advantages of 6/3 SRM such as the flux­reversal­free stator and it can improve vibration and noise by using six rotor poles due to balanced radial force acting on the rotor poles. In order to make a reasonable comparison between two SRMs, the electromagnetic field structure of 8/6 SRM is designed to have equivalent torque characteristic to 6/3 SRM and then the copper loss and core loss are compared and analyzed. Finally, we compare the effieicney of two SRMs using finite element analysis and compare the distribution of radial force acting on the rotor poles based on Maxwell's stress method.