• 한국인터넷방송통신학회논문지
• /
• 제23권6호
• /
• pp.145-155
• /
• 2023

도파관과 매칭구조를 이용하여 X-band에서 고효율 결합특성을 갖는 방사형 결합기를 설계 및 제작하였다. 특히 소형으로 제작하기 위해서 도파관 하나에 포트를 2개 매칭할 수 있는 이중 도파관-동축 변환 구조를 적용하였다. 이러한 구조를 적용하면 일반적인 동축-도파관 방사형 결합기보다 소형 제작이 가능해진다. X-band 대역인 9.2-10GHz 에서 측정결과 반사손실 -18.408dB 이하, 출력삽입손실 0.206dB 이하의 결과값을 얻었고 또한 출력결합효율은 95.37% 이상의 높은 값을 얻을 수 있었다. 향후 밀리미터파 대역에서 고출력 송신기용 결합부에 활용 가능할 것으로 기대된다. 특히 크기와 무게를 줄임으로서 활용범위가 더 늘어날 것으로 기대된다.

• Journal of Biosystems Engineering
• /
• 제5권2호
• /
• pp.1-14
• /
• 1980

This study was carried out to investigate the effects of the counter-pressure setting and the roller speed of a rice whitening machine on the head rice recovery. milling capacity and milling efficiency, and also to find out the optimum operational conditions of the machine. The radial pressure inside the whitening chamber and the outlet axial pressure were measured to study their relationships with the head rice recovery, milling capacity and milling efficiency. The results of the study are summarized as follows. (1) The most important factor in rice whitening was the counter-pressure setting. It significantly affected the head rice recovery. (2) The roller speed significant affected the milling capacity and milling efficiency , but it did not affected the head rice recovery. (3) Both the radial pressure and the outlet axial pressure were affected by the counter-pressure setting but not by the roller speed. Both of them increased almost linearly with the counter-pressure setting. There was a significant correlation between the radial pressure and the outlet axial pressure. (4) The flow rate through the whitening chamber when the feed gate was fully opened increased with the roller speed, but it was not affected by the counter-pressure setting. (5) The head rice recovery decreased as the counter-pressure setting increased , but it was not affected by the roller speed. The reason could be explained by the fact that the radical pressure increased only with the counter-pressure setting. (6) The milling capacity increased with the counter-pressure setting and linearly with the roller speed. The milling efficiency generally increased with both the counter-pressure setting and the roller speed. However, the effect of roller speed was negligible at the higher counter-pressure setting. The temperature rise inside the whitening chamber was moderate with the mean of 11.3℃ (range 5.6-18.3℃) even though it increased slightly with the roller speed. Considering the head rice recovery and milling efficiency, the optimum operational conditions of the machine appeared to be the counter-pressure setting of 67g/㎠ and the roller speed of 1,050rpm. Neglecting the small difference in the head rice recovery , the greater milling capacity could be obtained at the counter-pressure setting of 85g/㎠ with the roller speed of 850-1050rpm.

• 한국태양에너지학회 논문집
• /
• 제32권5호
• /
• pp.41-51
• /
• 2012

Heliostat field is the most important subsystem in the tower type solar thermal power plant since its optical performance affects the total system efficiency most significantly while the construction cost of it is the major part of total construction cost in such a power plant. Thus a well designed heliostat field to maximize the optical efficiency as well as to minimize the land usage is very important. This work presents methodology, procedures and result of heliostat filed design for 200kW solar thermal power plant built recently in Daegu, Korea. A $2{\times}2(m)$ rectangular shaped receiver located at 43(m) high and tilted $28^{\circ}$ toward heliostat field, 450 of heliostats of which the reflective surface is formed by 4 of $1{\times}1(m)$ flat plate mirror facet, and the land area having about $140{\times}120(m)$ size are used to form the heliostat field. A procedure to deploy 450 heliostats in radial staggered nonblocking formation is developed. Also the procedures to compute the cosine effect, intercept ratio, blocking and shading ratio in the field are developed. Finally the heliostat filed is designed by finding the optimal radial distance and azimuthal spacing in radial staggered nonblocking formation such that the designed heliostat field optical efficiency could be maximized. The designed heliostat field has 77% of annual average optical efficiency, which is obtained by annually averaging the optical efficiencies computed between the time of where sun elevation angle becomes $10^{\circ}$ after sunrise and the time of where sun elevation angle becomes $10^{\circ}$ before sunset in each day.

• Coupled systems mechanics
• /
• 제1권3호
• /
• pp.285-295
• /
• 2012

In this paper, two types of porous burners with radial and axial flow have been modeled numerically and compared. For this purpose, governing equations were solved one-dimensionally for methane-air premix gas. The mechanism used in simulating combustion phenomenon was 15 stage reduced mechanism based on GRI3.0. In order to compare the two burners, the inlet flow rate and fuel-air ratio have been assumed equal for the two burners. The results of the study indicated that reduction in speed and increase in cross-section area in the direction of flow have a considerable influence on the behavior of radial burner in comparison to axial burner. Regarding temperature distribution inside the burner, it was observed that the two above mentioned factors can be influential in temperature of flame propagation region. Also, regarding distribution of CO and NO emission, the results indicate that the porous radial burner has lower emissions in comparison to the axial once. The output radiative heat transfer efficiency of the two burners was also compared and in this case also even the radial porous burner was found to be preferable.

• 대한약침학회지
• /
• 제7권2호
• /
• pp.75-81
• /
• 2004

Objective : The purpose of this study is to report the efficiency of Bee Venom Therapy by managering of radial nerve palsy patients. Method : Three patients were treatmented by Bee Venom therapy and acupucture therapy. And we took pictures of someone's wrist and checked the power of muscles by the improving phase. Results : Almost cases shows the improvement in the movement of wrist and the numbness of hand. By using acuputure and Bee Venom therapy, the symptoms of radial nerv palsy was more fastly recovered.

• 대한교통학회지
• /
• 제31권2호
• /
• pp.11-19
• /
• 2013

본 연구에서는 방사적 측정방식과 비방사적 측정방식을 사용하여 국내공항의 상대적 효율성을 분석하였다. 이를 바탕으로 효율성 개선을 위해 비효율을 유발시키는 잔여부문을 분석하였으며, 효율적인 준거대상과의 비교를 통해 개선 방안을 제시하였다. 15개의 국내공항 중 14개의 공항을 분석대상으로 2004년에서 2011년까지의 8개년의 자료를 바탕으로 분석하였으며, 투입요소로는 활주로 길이, 종업원 수, 터미널 규모를 사용하였고, 산출요소로는 여객 수, 화물량, 비행편 수를 사용하였다. 분석결과 국내공항의 효율성은 대부분이 하락하는 추세였으며, 효율적인 공항과 비효율적인 공항의 격차가 매년 증가하고 있는 것으로 나타났다. 또한 대부분의 국내공항들이 수요대비 거대한 규모로 운영되는 점이 비효율성을 증가 시키는 주요원인이었다.

• 대한기계학회논문집B
• /
• 제39권3호
• /
• pp.207-214
• /
• 2015

해양온도차발전용 터빈의 효율과 크기를 파악하기 위해 R134a를 작동유체로 하고 출력 5 kW인 반경류형 터빈의 설계가 수행되었다. 터빈입구온도 $25^{\circ}C$, 출구 정압 4.9 bar, 질량유량 1.16 kg/s 로 설정하고 평균유동해석을 수행하여 터빈의 회전수와 주요 치수를 결정하였다. 이들을 바탕으로, 3 차원 터빈 모델을 구축하였으며, 도출된 터빈회전수 12,820 rpm에 대하여 전산유체역학(CFD) 소프트웨어 ANSYS CFX를 이용하여 볼류트와 노즐을 포함하는 터빈 내부 유동장 특성과 효율이 조사되었다. 80%이상의 터빈 효율이 적정 범위 내의 노즐 안내깃 수(10-15 개)에서 제시되었으며, 가장 높은 터빈 효율은 15 개의 안내 깃에서 나타났다.

• 한국인터넷방송통신학회논문지
• /
• 제19권1호
• /
• pp.231-238
• /
• 2019

본 논문에서는 단위 전력증폭기를 여러 개 결합하여 높은 출력을 얻을 때 결합 손실을 최소화하여 증폭기의 효율을 높이는 방법에 대해 연구하였다. 구체적으로는 도파관과 cavity 구조로 되어있는 공간결합기를 이용한 Ka 대역 공간결합증폭기를 제안하였다. 제작된 공간결합증폭기는 Ka 대역 20W급의 SSPA로서 GaN bare die를 이용하여 설계된 5W급의 단위 증폭모듈 8EA를 적용하였다. 그리고 Hybrid Radial 구조의 8-way 공간분배기와 공간결합기를 이용하여 단위증폭모듈을 결합하였다. 제작된 공간결합기의 출력 결합손실은 약 0.334dB이며 약 92.6%의 효율을 얻었다. 본 논문의 공간결합증폭기는 최대포화출력 10W, 전력부가효율 15%이상을 목표로 개발하였으며, 측정결과 최대포화출력 30W와 전력부가효율19%의 결과값을 얻었다.

• 한국정보통신학회논문지
• /
• 제20권1호
• /
• pp.131-141
• /
• 2016

SRM은 저비용, 간단한 자기구조, 넓은 운전속도, 높은 효율, 직류전원과의 우수한 결합성 등의 장점을 가진 전동기구이다. SRM의 토오크는 자속의 방향과는 무관하여 자기구조의 배치가 유연한 특성을 가지고 있어 다양한 자기구조를 가지고 있다. 본 논문에서는 자속방향에 따라 Radial-Flux SRM와 Axial-Flux SRM로 크게 나누었고 기계적인 구조의 차이에 따라 Radial-Flux SRM에는 Conventional, Segmented stator and rotor, Double stator SRM 로, 그리고 Axial-Flux SRM에는 C-core stator와 Axial-airgap SRM로 분류하였고 각각에 대해 비교 해석하여 적절한 용도에 최적의 자기구조를 선택할 수 있도록 각각의 기본적인 특성을 제시하였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권3호
• /
• pp.51-64
• /
• 2015

In the present study, we develop two history matching techniques based on Markov chain Monte Carlo method where radial basis function and Gaussian distribution generated by unconditional geostatistical simulation are employed as the random walk transition kernels. The Bayesian inverse methods for aquifer characterization as the developed models can be effectively applied to the condition even when the targeted information such as hydraulic conductivity is absent and there are transient hydraulic head records due to imposed stress at observation wells. The model which uses unconditional simulation as random walk transition kernel has advantage in that spatial statistics can be directly associated with the predictions. The model using radial basis function network shares the same advantages as the model with unconditional simulation, yet the radial basis function network based the model does not require external geostatistical techniques. Also, by employing radial basis function as transition kernel, multi-scale nested structures can be rigorously addressed. In the validations of the developed models, the overall predictabilities of both models are sound by showing high correlation coefficient between the reference and the predicted. In terms of the model performance, the model with radial basis function network has higher error reduction rate and computational efficiency than with unconditional geostatistical simulation.