• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.297-308
• /
• 2017

One of the major engine thermal management system(TMS) strategies for improving fuel economy is to operate the engine in high temperatures. Therefore, this work performed a numerical and experimental study to examine the effect of several different STOs(Starting Temperature of Opening) of wax-thermostat, ranging from $85^{\circ}C$ to $105^{\circ}C$, of gasoline engine on fuel economy and emission characteristics. In this study, a gasoline car equipped with waxthermostat was tested and simulated under FTP-75 and HWFET mode. CRUISE $M^{TM}$ was used to simulate vehicle dynamics, transient engine performance and TMS. The test results showed fuel savings for both drive cycles due to higher STO of $100^{\circ}C$, which is slightly worse than that of $90^{\circ}C$ and amounts between 0.34 and 0.475 %. These controversial results are attributed to experimental errors and uncertainty. The computational results for three STOs, $85^{\circ}C$, $95^{\circ}C$ and $105^{\circ}C$, showed that fuel savings attributed to the application of higher STOs of $95^{\circ}C$ and $105^{\circ}C$ are relatively small and range from 0.306 to 0.363 %. It is also found that the amount of HC and CO emissions from the tailpipe tends to decrease with higher engine coolant temperature because of faster catalyst light-off and improved combustion.

• 열처리공학회지
• /
• 제24권3호
• /
• pp.127-132
• /
• 2011

The silicon-containing Diamond-like Carbon (Si-DLC) film as an low friction coefficient coating has especially treated a different silicon content by plasma-enhanced chemical vapor deposition (PECVD) process at $500^{\circ}C$ on nitrided-STD 11 mold steel with (TMS) gas flow rate. The effects of variable silicon content on the Si-DLC films were tested with relative humidity of 5, 30 and 85% using a ball-on-disk tribometer. The wear-tested and original surface of Si-DLC films were analysed for an understanding of physical and chemical characterization, including a changing structure, via Raman spectra and nano hardness test. The results of Raman spectra have inferred a changing intra-structure from dangling bonds. And high silicon containing DLC films have shown increasing carbon peak ratio ($I_D/I_G$) values and G-peak values. In particular, the tribological tested surface of Si-DLC was shown the increasing hardness value in proportional to TMS gas flow rate. Therefore, at same time, the structure of the Si-DLC film was changed to a different intra-structure and increased hardness film with mechanical shear force and chemical reaction.

• 분석과학
• /
• 제19권1호
• /
• pp.107-114
• /
• 2006

본 연구에서는 trimethylsilyl (TMS) 및 trifluoroacetyl (TFA)유도체화를 이용하여 소변여지에서 대사이상 질환을 신속하게 스크리닝하는 GC/MS 분석법을 개발하였다. 유기산과 아미노산을 동시에 유도체화하기 위해 메틸오렌지를 지시약으로 하여 $60^{\circ}C-70^{\circ}C$에서 15-20 분간 카르복실기는 TMS로 아미노기는 TFA로 유도체한 후 GC/MS-SIM으로 분석하였다. 유기산과 아미노산의 직선성의 범위는 0.001-50 mg이었고, 소변에서의 검출한계는 10-200 ng, 정량한계는 80-900 ng 이었다. 직선성을 보이는 범위에서의 상관계수(R2)는 0.994-0.998이었고, 회수율은 methylcitric acid와 glycine을 제외하고 80-100%를 보였다. 이 방법은 기존의 유기산분석에는 GC/MS를 아미노산 분석에는 아미노산분석기를 사용하는 것과 비교할 때 GC/MS만 사용하여 동시에 유기산과 아미노산을 분석함으로써 전처리가 간단하고 짧은 분석시간과 우수한 감도, 정확도, 정밀도를 보여 주었다. 정상인과 대사이상질환 환자의 검체에 적용해 보았을 때, 본 분석방법은 유기산과 아미노산대사이상의 유전성대사질환 환자의 스크리닝, 진단 및 모니터링에 임상적으로 유용함을 보여주었다.

• 대한전자공학회논문지SP
• /
• 제47권3호
• /
• pp.1-10
• /
• 2010

본 논문은 카메라 영상 처리에서 중요한 부분인 색상 보간과 자동 화이트 조절을 동시에 수행하는 방법을 제안한다. 대부분의 자동 화이트 조절은 색상 보간 후에 수행이 되기 때문에 색상 보간의 결과에 영향을 받는다. 자동 화이트 조절의 성능을 높이기 위해서 색상 보간 수행 중에 색의 일관성이 고려된다. 자동 화이트 조절 이득 계산과 색상 보간의 방향 결정을 위한 초기 추정치를 테일러 시리즈를 이용하여 상하좌우 방향으로 구한다. 미리 정의된 무채색 영역을 이용하여 에지 기반 자동 화이트 조절을 수행한다. 에지 기반 자동 화이트 조절의 이득을 계산하고 색상 보간의 성능을 높이기 위해서 베이어 데이터의 각 화소에서 평탄, 에지, 패턴 에지 영역으로 구분한다. 색상 보간은 초기 추정치 중에서 국부 분산을 사용하여 보간 오류의 발생을 최소화하는 방향으로 수행한다. R과 B 색상은 보간된 G 색상과 색의 일관성이 고려된 색차값을 이용해서 쉽게 보간된다. 제안된 알고리즘은 기존 알고리즘에 비해 수치적 및 영상의 화질 면에서 모두 뛰어난 결과를 보임을 실험을 통해 확인 할 수 있다.

• 대한전자공학회논문지SP
• /
• 제47권2호
• /
• pp.86-94
• /
• 2010

본 논문은 잡음을 고려한 공간적응적 색상 보간 방법을 제안한다. 센서의 잡음은 색상 보간 과정에 영향을 미쳐서 결과 영상의 열화를 초래하기 때문에 센서의 잡음이 색상 보간 방법에 고려됨으로써 고해상도의 영상을 획득할 수 있다. 알고리즘의 성능 향상과 연산량의 효율성을 높이기 위해서 베이어 화소에서 평탄, 에지, 패턴 에지 영역으로 각각 구분한다. 영역에 따라 다른 마스크를 이용하여 국부 통계치를 계산하게 되고, 이를 이용해서 보간 오류가 최소화 되도록 G 색상을 보간한다. 잡음제거를 위해서는 수정된 Non-Local 평균 필터가 사용된나. R파 B 색상은 잡응이 제거되고 보간된 G 색상파 색차값을 이용해서 쉽게 보간된다. 제안된 알고리즘은 기존 알고리즘에 비해 주관적 및 객관적인 변에서 모두 뛰어난 결과를 보임을 실험을 통해 확인 할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.306-311
• /
• 1992

We propose software algorithms which provide the characteristics of acceleration/deceleration essential to high dynamic performance at the transient state where industrial robots or CNC machine tools start and stop. The path error, which is one of the most significant factors in performance evaluation of industrial robots and CNC machine tools, is analyzed for linear, exponential, and parabolic acceleration/deceleration algorithms in case of circular interpolation. The analysis shows that the path error depends on the acceleration/deceleration routine and the servo control system. In experiments, the entire control algorithm including the proposed acceleration/deceleration algorithms is executed on the motion control system with a floating point digital signal processor(DSP) TMS320C30 as a CPU. The experimental results demonstrate that the proposed algorithms are very effective in controlling axes of motion of industrial robots or CNC machine tools with the desired characteristics.

• Nuclear Medicine and Molecular Imaging
• /
• 제41권2호
• /
• pp.158-165
• /
• 2007

Technological advances in molecular imaging made it possible to image synaptic neurotransmitter concentration in living human brain. The dopaminergic system has been most intensively studied because of its importance in neurological as well as psychiatric disorders. This paper provides a brief overview of recent progress in imaging studies of dopamine release induced by pharmacologic and nonpharmacologic stimulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.638-641
• /
• 1997

This paper describes the electrical design, characteristic and test results of both VVVF Inverter system and a auxiliary power supply system for UTM-01. As the propulsion system for SLIMs, GTO type VVVF inverter is used. IGBT 3 level inverter is adopt in Auxiliary Power Supply system. The control of two systems is fully digitalized by DSP TMS320C31. So a performance of two systems is more improved.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.858-865
• /
• 2008

In this paper, Capacitive Telemetry RF Sensor System using Recursive Least Square (RLS) algorithm was proposed. General Telemetry RF Sensor System means that it should be "wireless", "implantable" and "batterless". Conventional Telemetry RF Sensor System adopts Integrated Circuit type, but there are many defects like complexity of structure and the limitation of large power consumption in some cases. In order to overcome these disadvantages, Telemetry RF Sensor System based on inductive coupling principle was proposed in this paper. Proposed Telemetry RF Sensor System is very simple because it consists of R, L and C and measures the changes of environment like pressure and humidity in the type of capacitive value. This system adopted RLS algorithm for estimation of this capacitive parameter. For the purpose of applying RLS algorithm, proposed system was mathematically modelled with phasor method and was quasi-linearized. As two parameters such as phase and amplitude of output voltage for estimation were needed, Phase Difference Detector and Amplitude Detector were proposed respectively which were implemented using TMS320C2812 made by Texas Instrument. Finally, It is verified that the capacitance of proposed telemetry RF Sensor System using RLS algorithm can be estimated efficiently under noisy environment.

• 전자공학회논문지B
• /
• 제31B권10호
• /
• pp.21-31
• /
• 1994

This paper describes the multichannel combined R2MFC/DTMF/CCT reciver which provides a signaling service functions for call processing control in digital switching system. Using the TMS320C25 DSP chip, we have implemented multi-function receriver shich processes 8 channels of R2MFC, DTMF, and CCT signals simultaneously. In order to increase the channel multiplicity of the combined receiver. R2MFC and CCT receiver were employed by discrete Fourier transform(DFT) method using Goertzel algorithm, and DTMFreceiver was employ by infinite impulse reponse(IIR) filtering method using 4KHz subsampling technique. The combined receiver has 4 function modes for each channel such as R2MFC, DTMF, CCT, and Idle modes. The function mode of each channel may be selected at any time by single-chip micro-controller(.mu.C). Hence, the number of channels assigned for each function mode can be adjusted dynamically according to the signaling traffic variations. From the experimental test results using the test-bed, it has been proved that the combined receiver statisfies all receiver satisfies all receiver specifications, and provides good channel multiplicity and performance, Therefore, it may give a great improvement than existing receiver in cost, reliability, availability, and serviceability.