• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1051-1061
• /
• 1995

In order perform leak-before-break design of nuclear piping systems and integrity evaluation of reactor vessels, full stress-strain (.sigma. - .epsilon.) curves and fracture resistance (J-R) curves are required. However it is time-consuming and expensive to obtain J-R curves experimentally. The objective of this paper is to develop two methods for J-R curve prediction. In the first method, elastic-plastic finite element analyses for a series of crack length / specimen width ratio were performed. Accordingly the load versus load line displacement (P .delta.) curve corresponding to the fracture strain is obtained and the J-R curve based on the generalized locus method is obtained. In the second method, the correlation between .sigma.-.epsilon. curves and J-R curves was statistically analyzed and an empirical equation to predict the J-R curve from the .sigma.-.epsilon. test result is proposed. A good correlation between the predicted results based on the proposed methods and the experimental ones is obtained.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.389-396
• /
• 2003

This paper presents experimental validation of the enhanced reference stress based J estimates for circumferential through-wall cracked pipes, recently proposed by authors. Using the pipe test data for circumferential through-wall cracked pipes, the predicted fracture initiation and maximum moments according to the proposed enhanced reference stress method are compared with experimental ones as well as predictions from the R6 method. The results show that both the R6 method and the proposed method give conservative estimates of initiation and maximum moments for circumferential through-wall cracked pipes, compared to experimental data. For longer cracks, the proposed method reduces conservatism embedded in estimated J according to the R6 method, and the resulting predictions are less conservative, compared to those from the R6 method. For shorter cracks, on the other hand, the proposed method reduces possible non-conservatism embedded in estimated J according to the R6 method, and the resulting predictions are slightly more conservative.

• 대한기계학회논문집A
• /
• 제27권4호
• /
• pp.638-646
• /
• 2003

This paper presents experimental validation of the enhanced reference stress based J estimates for circumferential through-wall cracked pipes. recently proposed by authors. Using the pipe test data for circumferential through-wall cracked pipes, the predicted fracture initiation and maximum moments according to the proposed enhanced reference stress method are compared with experimental ones as well as predictions from the R6 method. The results show that both the R6 method and the proposed method give conservative estimates of initiation and maximum moments for circumferential through-wall cracked pipes, compared to experimental data. For longer cracks, the proposed method reduces conservatism embedded in estimated J according to the R6 method, and the resulting predictions are less conservative, compared to those from the R6 method. For shorter cracks, on the other hand, the proposed method reduces possible non-conservatism embedded in estimated J according to the R6 method, and the resulting predictions are slightly more conservative.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1786-1795
• /
• 1997

In order to perform leak-before-break design of nuclear piping systems and integrity evaluation of reactor vessels, full stress-strain curves and fracture resistance (J-R) curves are required. However it is time-consuming and expensive to obtain J-R curves experimentally. The objective of this paper is to modify two J-R curve prediction methods previously proposed by the authors and to propose an additional J-R curve prediction method for nuclear piping materials. In the first method which is based on the elastic-plastic finite element analysis, a blunting region handling procedure is added to the existing method. In the second method which is based on the empirical equation, a revised general equation is proposed to apply to both carbon steel and stainless steel. Finally, in the third method, both full stress-strain curve and finite element analysis results are used for J-R curve prediction. A good agreement between the predicted results based on the proposed methods and the experimental ones is obtained.

• 한국수소및신에너지학회논문집
• /
• 제17권4호
• /
• pp.440-447
• /
• 2006

Solid polymer electrolyte(SPE) membrane with electrodes embedded on both faces offer unique possibilities for the electrochemical cells like water electrolyzer with fuel cell. The Nafion 117 membrane was used as the SPE, and $Pt(NH_3)_4Cl_2$ and $NaBH_4$ as the electrocatalysts and reducing agent, respectively. The 'impregnation-reduction(I-R) method' has been investigated as a tool for the preparation of electrocatalysts for water electrolyzer by varying the concentration of reducing agent and reduction time at fixed concentration of platinum salt, 5 mmol/L. Pt-SPE electrocatalysts prepared by non-equilibrium I-R method showed the lowest cell voltage of 2.17 V at reduction time, 90 min and with concentration of reducing agent 0.8 mol/L and the cell voltage with those by equilibrium I-R method was 2.42 V at reduction time, 60 min and with concentration of reducing agent 0.8 mol/L. The cell voltage were obtained at a current density $1\;A/cm^2$ and $80^{\circ}C$. In water electrolysis, hydrogen production efficiency by Pt-SPE electrocatalyst is 68.2% in case of non-equilibrium I-R method and 61.2% at equilibrium I-R method.

• Bulletin of the Korean Chemical Society
• /
• 제31권6호
• /
• pp.1751-1752
• /
• 2010

• 지구물리와물리탐사
• /
• 제16권1호
• /
• pp.59-62
• /
• 2013

우리는 구면일부지역에서의 퍼텐셜마당에 대하여 구면의 곡률을 고려하는 새로운 상향연속방법을 이전에 보고하였다. 그런데, 이 방법은 실제로 $r_2/r_1$의 비율(즉, 목표면의 반경 $r_2$ 대 자료면의 반경 $r_1$) 만을 달리함으로써 하향연속에도 그대로 사용될 수 있다. 한편, 이 방법에 내재된 구면의 기하학적 성질에 기인하는 문제와 그에 대한 대책을 기술하였다.

• 한국IT서비스학회지
• /
• 제20권1호
• /
• pp.41-54
• /
• 2021

The SW-centered battlefield management information system R&D project takes a long period of 5-10 years or more by applying a complex and rigid batch acquisition strategy. In order to solve this problem, it is necessary to institutionalize a rapid and flexible battlefield management information system R&D project management procedure applying agile development methodology, and a government project management organization and contract management method to support it In this study, we analyzed the case of applying the Agile development method centered on Scrum to the US SW-centered weapon system R&D project and the characteristics and problems of the battlefield management information system R&D project in Korea, and suggested improvement measures as follows. First, the battlefield management information system R&D model applies the hybrid development method, and the system requirements analysis and system structure design use the existing waterfall development procedure, and the agile method is applied from the SW requirements analysis to the system integration stage. Second, flexible adjustment of performance, schedule, and cost by organizing an Agile IPT in which military (requirements) - DAPA (project management) - developer - functional specialized organizations (test and evaluation, quality, government research institutes, etc.) participate. Third, improving the Basic Order Agreement so that it can be applied to agile R&D.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.87-93
• /
• 2014

n/m=qm+r에서 에서 m=7인 단순한 경우에도 주어진 수 n이 m의 배수 판정법은 간단하지가 않다. 만약, m이 두 자리 수 이상이 되면 더욱 복잡해진다. 일반적인 배수 판정법으로 둔켈스 (Dunkels)법이 있지만 n이 컴퓨터로 처리하지 못하는 매우 큰 자리수인 경우 이 방법도 처리할 수 없다. 본 논문은 n과 m의 자리수와 무관하게 n(modm)=0 여부로 n이 m의 배수인지 여부를 검증하는 간단하면서도 정확한 방법을 제안한다. 제안된 방법은 $n=n_1n_2n_3{\cdots}n_k$, $m=m_1m_2{\cdots}m_l$에 대해 $r_1=n_1n_2{\cdots}n_l(mod m)$으로 설정하고, $r_i=r_{i-1}{\times}10+n_i(mod m)$, $i=2,3,{\cdots},k-1+1$로 n의 자리수를 1자리씩 감소시키는 방법을 적용하였다. 제안된 방법을 다양한 n,m 데이터에 적용한 결과 쉽고, 빠르며 정확한 몫과 나머지 값을 구할 수 있음을 보였다.

• 대한핵의학회지
• /
• 제30권3호
• /
• pp.315-324
• /
• 1996

목적 : 정상인과 파킨슨 환자의 [I-123]IPT SPECT 데이터를 이용하여 그래픽 분석방법과 축적된 특이결합과 비특이결합의 면적에 대한 비율을 이용한 분석방법으로 얻은 $k_3/k_4$와 조직방사능비를 비교하고 [I-123]IPT SPECT의 유용성을 알아보기 위한 것이다. 방법 : [I-123]IPT($6.5{\pm}1.1$ mCi)를 6명의 정상인(나이:$45{\pm}13$)과 17명의 파킨슨 환자(나이:$55{\pm}8$)에게 순간 정맥주사하였다. SPECT 데이터는 5분 간격으로 2시간 동안 얻어졌다. 운반체 매개변수 $k_3/k_4$는 동적 IPT SPECT 데이터를 이용 혈액 표본이 사용되지 않는 Ichise의 그래픽분석방법($R_v$)과 Lassen의 면적비율방법($R_A$)를 이용하여 얻어졌다. 운반체 매개변수 $R-v,\;R_A$ 그리고 115분에서 얻은(BG-OCC)/OCC비 사이의 관계들은 선형회귀분석을 사용하였다. 결과 : 정상인과 파킨슨 환자에 대한 $R_v$ 값은 각각 $2.08{\pm}0.29$와 $0.78{\pm}0.31$이었다. 그리고 $R_A$ 값은 정상인과 파킨슨 환자에 대해 각각 $1.48{\pm}0.16$과 $0.65{\pm}0.24$이었다. (BG-OCC)/OCC와 $R_v$,(BG-OCC)/OCC와 $R_A$ 그리고 $R_v$와 $R_A$ 사이의 상관계수들은 각각 0.93, 0.90, 0.99이었고, 그것들에 대응하는 기울기들은 각각 0.54, 0.34, 0.65이었다. 정상인의 $R_v$와 $R_A$는 파킨슨 환자의 것보다 높았다. 즉, 정상인의 $k_3/k_4$는 파킨슨 환자의 것과 뚜렷이 구분되었다. 그리고 그래픽 분석방법과 면적비율 분석방법에 의한 $k_3/k_4$는 조직방사능비와 좋은 상관관계를 보여주었다. 결론 : 비침습성 단순화된 정량분석 방법들은 매개변수 $k_3/k_4$를 측정하는데 유용할 것이다. 그리고 특이결합비율 분석방법은 [I-123]IPT SPECT를 이용한 사람뇌의 도파민 운반체의 정량분석연구에 대해 유용하게 사용될 것이라고 생각된다.