• Journal of Korea Multimedia Society
• /
• v.9 no.2
• /
• pp.197-207
• /
• 2006

When the latency of a flow in a fair packet scheduler, which is determined by its rate, violates its required delay bound, the scheduler should reduce the latency with even raising the rate being reserved for the flow. The excessively reserved rate win enforce some outgoing link bandwidth be lost. This loss can not be, unfortunately, evaluated by the three metrics of latency, fairness and implementation complexity used in previous works. This paper is aimed to first introduce the metric of bandwidth utilization to investigate the bandwidth loss in a scheduler and then evaluate the timestamp based schedulers in terms of the bandwidth and payload utilizations. The results show that the bandwidth utilization increases with loosing the required delay bound and, in particular, schedulers with the latency property of WFQ have much better payload utilization by up to 50% than that in the SCFQ one.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.286-295
• /
• 2015

Avionic databuses fulfill a critical function in the connection and communication of aircraft components and functions such as flight-control, navigation, and monitoring. Ethernet-based avionic databuses have become the mainstream for large aircraft owning to their advantages of full-duplex communication with high bandwidth, low latency, low packet-loss, and low cost. As a new generation aviation network communication standard, avionics full-duplex switched ethernet (AFDX) adopted concepts from the telecom standard, asynchronous transfer mode (ATM). In this technology, the switches are the key devices influencing the overall performance. This paper reviews the avionic databus with emphasis on the switch architecture classifications. Based on a comparison, analysis, and discussion of the different switch architectures, we propose a new avionic switch design based on a time-division switch fabric for high flexibility and scalability. This also merges the design concept of space-partition switch fabric to achieve reliability and predictability. The new switch architecture, called space partitioned shared memory switch (SPSMS), isolates the memory space for each output port. This can reduce the competition for resources and avoid conflicts, decrease the packet forwarding latency through the switch, and reduce the packet loss rate. A simulation of the architecture with optimized network engineering tools (OPNET) confirms the efficiency and significant performance improvement over a classic shared memory switch, in terms of overall packet latency, queuing delay, and queue size.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.34-41
• /
• 2008

Existing mobility support scheme like MIPv4 has the delay at data transfer and Triangle routing problem. This paper proposes the new mobility support scheme and method that can overcome the problem using MPLS LSP in Next Generation Network. The proposed scheme overcomes the problem by introducing the LMS(Location Management Server) managing the location of the mobile terminal and the MPLS LSP between FA for a tunneling. We shows on the mathematical analysis using the queuing theory that this proposed scheme is more superior to the existing method(MIP).

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.111-118
• /
• 2014

PURPOSES : This study performs fundamental research on ramp-metering design criteria. METHODS : We carefully review previous studies in terms of ramp-metering design criteria and then consider applicability in Korea. For this, traffic simulation model is employed to analyze actual effect according to specific location of stop-line when implementing ramp-metering. RESULTS : When a stop-line moving forward with a 50m interval, travel speed at mainline relative to current stop-line location tends to decrease. However, traveling speed at approach roads increase about 5~18% under the same condition. When a stop-line location moving backward with a 50m interval, mainline travel speed increase approximately 17~32% whereas traveling speed at approach roads decrease. All cases are compared with the current stop-line location. CONCLUSIONS : We believe that both cases are useful with respect to freeway management. For example, moving forward a stop-line case can be used management for queuing area at ramp section and approach roads. Moving backward a stop-line case can be used for traffic control, focusing on mainline of freeways.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.2
• /
• pp.44-50
• /
• 2004

Recently, as the number of entities participating in the Grid system increased, the response time of LDAP system became inadequate. Consequently, we have to design new LDAP that suitable for high performance Grid environments. For this, researches about analysis of performance LDAP system are needed firstly. However, because researches are focused mostly on read operation optimized environments, so these result of researches are not directly applied to high performance Grid environments that write operation occupies most. In this paper, we provide overall results of analysis of performance of distributed directory system. The analysis is based on an analytic performance model by applying the M/M/1 queuing model. Finally, based on the results, we suggest the direction for the design of high performance LDAP system and this research results can be applied as basic materials to design of GIS in high performance Grid environments as well as.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.2
• /
• pp.683-701
• /
• 2012

IEEE 802.11 standard has achieved huge success in the past decade and is still under development to provide higher physical data rate and better quality of service (QoS). An important problem for the development and optimization of IEEE 802.11 networks is the modeling of the MAC layer channel access protocol. Although there are already many theoretic analysis for the 802.11 MAC protocol in the literature, most of the models focus on the saturated traffic and assume infinite buffer at the MAC layer. In this paper we develop a unified analytical model for IEEE 802.11 MAC protocol in ad hoc networks. The impacts of channel access parameters, traffic rate and buffer size at the MAC layer are modeled with the assistance of a generalized Markov chain and an M/G/1/K queue model. The performance of throughput, packet delivery delay and dropping probability can be achieved. Extensive simulations show the analytical model is highly accurate. From the analytical model it is shown that for practical buffer configuration (e.g. buffer size larger than one), we can maximize the total throughput and reduce the packet blocking probability (due to limited buffer size) and the average queuing delay to zero by effectively controlling the offered load. The average MAC layer service delay as well as its standard deviation, is also much lower than that in saturated conditions and has an upper bound. It is also observed that the optimal load is very close to the maximum achievable throughput regardless of the number of stations or buffer size. Moreover, the model is scalable for performance analysis of 802.11e in unsaturated conditions and 802.11 ad hoc networks with heterogenous traffic flows.

• Journal of KIBIM
• /
• v.8 no.3
• /
• pp.31-42
• /
• 2018

This study focuses on the BIM request for information(RFI) processing performance and quantitatively analyzes the performance of the BIM coordinator and the loss due to the waiting of the project participants. For these purposes, a method to quantitatively evaluate the performance of the BIM coordinator was proposed using a queueing model. For the verification, two projects in which BIM was applied in the construction phase were selected, and the BIM RFI data were collected through the analysis of the BIM monthly report and BIM coordinator work log of each project. In addition, the BIM input personnel, labor cost, and productivity data were collected through interviews with the experts of the case projects. The analysis of the BIM RFI processing performance of the BIM coordinator using the queueing model exhibited on a probabilistic basis that the waiting status of the project participants could vary depending on the preliminary BIM application to the design verification as well as the input number and level of the BIM coordinator personnel. In addition, the loss cost due to the waiting of the project participants was analyzed using the number of BIM RFIs waiting to be processed in the queueing system. Finally, the economic feasibility analysis for the optimal BIM coordinator input was performed considering the loss cost. The results of this study can be used to make decisions about the optimal BIM coordinator input and can provide grounds for the BIM return on investment (ROI) analysis considering the waiting cost of the project participants.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.215-217
• /
• 2005

There are two types of packet loss probabilities used in both the network layer and the physical layer within the wireless transmitter such as a queueing discard probability and transmission loss probability. We analyze these loss performances in order to guarantee Quality of Service (QoS) which is the basic of the future network. The queuing loss probability is caused by a maximum allowable delay time and the transmission loss probability is caused by a wireless channel error. These two types of packet loss probabilities are not easily analyzed due to recursive feedback which, originates as a result at a queueing delay and a number of retransmission attempts. We consider a wireless transmitter to a M/D/1 queueing model. We configurate the model to have a finite-size FIFO buffer in order to analyze the real-time traffic streams. Then we present the approaches used for evaluating the loss probabilities of this M/D/1/K queueing model. To analyze the two types of probabilities which have mutual feedbacks with each other, we drive the solutions recursively. The validity and accuracy of the analysis are confirmed by the computer simulation. From the following solutions, we suggest a minimum of 'a Maximum Allowable Delay Time' for real-time traffic in order to initially guarantee the QoS. Finally, we analyze the required service rate for each type utilizing real-time traffic and we apply our valuable analysis to a N-user's wireless network in order to get the fundamental information (types of supportable real-type traffics, types of supportable QoS, supportable maximum number of users) for network design.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.1
• /
• pp.77-84
• /
• 2004

Recently, as the number of entities participating in the Grid system increased, the response time of LDAP system became inadequate. Consequently, we have to design new LDAP that suitable for high performance Grid environments. For this, researches about analysis of performance LDAP system are needed firstly. However, because researches are focused mostly on read operation optimized environments, so these result of researches are not directly applied to high performance Grid environments that write operation occupies most. In this paper, we provide overall results of analysis of performance of LDAP system with respect to number of node, query arrival rate, probability of read and so on. The analysis is based on in analytic performance model by applying the M/M/1 queuing model. Finally, based on the results, we suggest the direction for the design of high performance LDAP system and this research results can be applied as basic materials to design of GIS in high performance Grid environments as well as.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.209-230
• /
• 2007

This paper analyzed the social cost function of a congestion-prone service system, which is developed from the social cost minimization problem. The analysis focused on the following two issues that have not been explicitly explored in the previous studies: the effect of the heterogeneity of value-of-travel-times among customers on the structure of cost functions; and the structure of the supplier cost function constituting the social cost function. The analysis gave a number of findings that could be summarized as follows. First, the social marginal cost for one unit increase in system output having a certain value-of-travel-time is the sum of the service time cost for that value-of-travel-time and the marginal congestion cost for the average value-of-service-time of all the system outputs. Second, the marginal congestion cost equals the marginal supplier cost of system output under the condition that supplier compensates the customers for the changed service time costs which is incurred by the marginal capacity increase necessary for economically facilitating an additional system output. Third, the compensated marginal cost is the multiple of the marginal capacity cost and the inverse of system utilization ratio, if the service time function is homogeneous of degree zero in its inputs.