• 노동경제논집
• /
• 제40권4호
• /
• pp.61-89
• /
• 2017

본 연구는 여성관리자패널조사(Korean Women Manager Panel)를 이용하여 한국 여성 근로자의 직장 내 스트레스 및 승진에 상사의 성별이 미치는 영향을 분석한다. 분석결과 직속 상사가 여성일 때 여성 근로자의 직장 내 스트레스는 높았고, 사원 및 대리 직급 여성의 승진에 부의 영향을 미치는 것으로 나타났다. 여왕벌 현상과 역할일치이론에 따르면 한국과 같이 유리천장이 견고하고 상위 직급의 남성 밀집도가 높은 구조에서는 여성 리더십의 긍정적인 특성이 발휘되기보다 다른 여성에 대해 높은 인정 기준을 요구하거나 경쟁적인 모습을 보여 여성 상사를 둔 여성 근로자의 직장 내 스트레스는 높고 낮은 직급의 여성 승진확률은 낮추는 것으로 해석할 수 있다.

• 한국자기학회지
• /
• 제13권2호
• /
• pp.76-81
• /
• 2003

매설된 송유관이나 가스관의 외부면과 내부면에 생성된 원형 결함(double circular pit) 부근에서 누설되는 자속 신호에 미치는 결함깊이와 인장응력(tensile stress)의 영향을 3차원 유한요소법을 이용하여 계산하였다. 배관의 축 및 방사상 방향의 누설자속 (Magnetic Flux Leakage: MFL) 신호는 배관 외$.$내부 면의 이중 결함깊이와 인장응력에 의해 영향을 받으며, 결함의 깊이가 깊어질수록 인장응력이 커질수록 MFL 신호는 증가하였다. 그러나 원주 방향의 MFL 신호는 결함깊이와 인장응력에 거의 영향을 받지 않았다.

• Archives of Plastic Surgery
• /
• 제47권6호
• /
• pp.619-621
• /
• 2020

This article portrays the authors' clinical experience of a complex case of lower extremity reconstruction using a recycled pedicle from 10 years old free latissimus dorsi musculocutaneous flap to supply a new free anterolateral thigh flap for proximal tibia wound defect reconstruction. It provides clinical evidence that muscle neovascularization occurs and supports the dogma peripheral tissue neovascularization. This case stipulates that recycling of pedicle is feasible, when used with appropriate strategy and safety and also provides evidence for the long-term survival of greater saphenous vein grafts in lower extremity reconstruction.

• Steel and Composite Structures
• /
• 제7권1호
• /
• pp.19-34
• /
• 2007

This paper presents results of a non-linear finite element analysis of axially loaded slender hollow structural section (HSS) columns, strengthened using high modulus carbon-fiber reinforced polymer (CFRP) longitudinal sheets. The model was developed and verified against both experimental and other analytical models. Both geometric and material nonlinearities, which are attributed to the column's initial imperfection and plasticity of steel, respectively, are accounted for. Residual stresses have also been modeled. The axial strength in the experimental study was found to be highly dependent on the column's imperfection. Consequently, no specific correlation was established experimentally between strength gain and amount of CFRP. The model predicted the ultimate loads and failure modes quite reasonably and was used to isolate the effects of CFRP strengthening from the columns' imperfections. It was then used in a parametric study to examine columns of different slenderness ratios, imperfections, number of CFRP layers, and level of residual stresses. The study demonstrated the effectiveness of high modulus CFRP in increasing stiffness and strength of slender columns. While the columns' imperfections affect their actual strengths before and after strengthening,the percentage gain in strength is highly dependent on slenderness ratio and CFRP reinforcement ratio, rather than the value of imperfection.

• Steel and Composite Structures
• /
• 제28권6호
• /
• pp.709-718
• /
• 2018

Masonry walls are sometimes removed in buildings to either make new passages or increase the usable space. This may change the loading paths in the structure, and require new beams to transfer the loads which are carried by the masonry walls that are to be removed. One possible method of creating such new beams is to attach steel plates onto part of the existing walls to form a steel plate-masonry composite (SPMC) beam, leading to a new structure with part of the masonry wall supported by a new SPMC beam. This paper presents an experimental investigation into the interaction between the SPMC beam and the masonry wall above. Five SPMC beams supporting a masonry wall were tested to study the influence of parameters including the height-to-span ratio of the masonry wall, height of the beam and thickness of the steel plates. The test results, including failure mode, load-carrying capacity, load-deflection curves and strain distribution, are presented and discussed. It is found that for developing better arching effect in the masonry wall the ratio of the in-plane flexural stiffness of the masonry wall to the flexural stiffness of the SPMC beam must be between 2.8 and 7.1.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권4호
• /
• pp.1285-1288
• /
• 2012

Background: The Fagerstrom Test for Cigarette Dependence (FTCD) (formally FTND) is widely used for measuring physical dependence on nicotine. Objective: To explore the cross cultural validity and reliability of FTCD amongst Arabic speaker cigarette consumers who chew khat leaf, a stimulant green leaf. Methods: The psychometric properties of the FTCD were assessed in a subsample (91regular cigarette smokers) of purposively selected 204 UK-resident Yemeni khat chewers recruited during random visits to khat sale outlets. Data were collected via a structured face-to-face interview. Data analyses included descriptive tests and factor analysis. Results: Two factors were obtained by a principle axis factor analysis and these were termed as urgency of restoring the level of nicotine after abstinence during sleeping and maintaining the level of nicotine during waking. The internal reliability (Cronbach's alpha coefficient) of the whole FTCD is low (.68) as well as for the two subscales (.60) and (.62) respectively. Conclusion: The psychometric properties of the Arabic version of the FTCD scale in this sample of Yemeni khat chewers who smoked regularly confirmed what has been established in other cultural settings. The findings of this study have yet to be cross validated amongst other appropriately representative sample of Arabic speakers.

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2377-2384
• /
• 2011

Azo-acenaphthylene oligomers with repeating acenaphthylene units "n" up to 4, 5, 7, 17 and 19 have been prepared successfully using nitroxide mediated Stable Free Radical Polymerization (SFRP). Azo-acenaphthylene oligomers, reversibly end-capped by the stable nitroxide 2,2,6,6-tetramethyl-1-piperidinoxyl (TEMPO), were further reacted via radical addition to 4-(naphthalenemethoxy)styrene monomer for diblock co-polymer formation. Characterization of the oligomers and diblock co-polymers was accomplished using MALDI-MS supported by GPC (Gel Permeation Chromatography) and $^1H$ NMR spectrometry. MALDI-MS afforded definitive results by providing an inter-peak interval of 152 (m/z), corresponding to acenaphthylene monomer, and inter-peak interval of 260 (m/z) for the naphthalenemethoxystyrene monomer unit in block copolymers. Our study opens the way to control the number of repeat units in the oligomers. Further these oligomers can be tailored with various monomers for the formation of block copolymers.

• Journal of Power Electronics
• /
• 제8권4호
• /
• pp.332-344
• /
• 2008

High frequency AC (HFAC) power distribution systems delivering power through a high frequency AC link with sinusoidal voltage have the advantages of simple structure and high efficiency. In a multiple module system, where multiple resonant inverters are paralleled to the high frequency AC bus through connection inductors, it is necessary for the output voltage phase angles of the inverters be controlled so that the circulating current among the inverters be minimized. However, the phase angle of the resonant inverters output voltage can not be controlled with conventional phase shift modulation or pulse width modulation. The phase angle is a function of both the phase of the gating signals and the impedance of the resonant tank. In this paper, we proposed a pulse phase modulation (PPM) concept for the resonant inverters, so that the phase angle of the output voltage can be regulated. The PPM can be used to minimize the circulating current between the resonant inverters. The mechanisms of the phase angle control and the PPM were explained. The small signal model of a PPM controlled half-bridge resonant inverter was analyzed. The concept was verified in a half bridge resonant inverter with a series-parallel resonant tank. An HFAC power distribution system with two resonant inverters connected in parallel to a 500kHz, 28V AC bus was presented to demonstrate the applicability of the concept in a high frequency power distribution system.

• 패션비즈니스
• /
• 제20권2호
• /
• pp.78-96
• /
• 2016

This study investigated the colors of the costumes and backgrounds of characters in the fantasy film, Alice in Wonderland(2010) by Tim Burton. The methods used were literature studies including related books, articles and internet materials, and positive research with DVD color analysis. Twenty-one scenes were selected by the researcher. Five scenes were selected from novel and film components representing, exposition, complication, crisis, climax, and denouement. After controlled pixel by photoshop program and the represented colors, hues and tones were analyzed. The results were as follows; First, in four characters, Alice's dress colors changed depend on the situation and the passage offered from blue to red, metal light, and blue green. The Mad Hatter's colors were orange with green which signified madness and passion. The Red Queen's red dress and blue make up represented countrified and evil. The White Queen's all white dress and hair, black eyes and vivid red meant purity and nobility. Similar characters' colors were limited. Second, the background colors, especially tones were an important component of the fantasy image. These were different for each type of scene in the film such as exposition, complication, crisis, climax, and denouement.

• 건축역사연구
• /
• 제27권3호
• /
• pp.27-42
• /
• 2018

This study aims to reinterpret Jeonggwanheon(靜觀軒) in terms of its use and architectural style after restoration work through the recently discovered [Deoksugung Palace's original plan](1915). It is presupposed that the existing interpretation of Jeonggwanheon, such as its status as the banquet hall of the Imperial Empire and the place where Emperor Gojong enjoyed coffee here, was a fantasy made from the transformation after the 1930s. When it was built around 1900, Jeonggwanheon arranged small and large rooms around the corridor in the center, and the porch surrounded the three sides of the building. From 1900 to 1907, there is no remaining record telling us who did what or when something happened in Jeonggwanheon except for several portraits of Emperor Gojong and his son which were drawn in 1902. The mixed use of brickwork and wooden porch are found in many of American style houses built in Incheon and Seoul at that time. Especially, the style and decoration of wooden porch seem to be influenced by Queen Anne style in the 19th century in America.