• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.181-188
• /
• 2001

The flow past a circular cylinder forced to vibrate transversely is numerically simulated by solving the two-dimensional Wavier-Stokes equations modified by the vibration velocity of a circular cylinder at a Reynolds number of 164. The higher-order finite difference scheme is employed for the spatial discretization along with the second order Adams-Bashforth and the first order backward-Euler time integration. The calculated cylinder vibration frequency is between 0.60 and 1.30 times of the natural vortex-shedding frequency. The calculated oscillation amplitude extends to $25\%$ of the cylinder diameter and in the case of the lock-in region it is $60\%$. It is made clear that the cylinder oscillation has influence on the wake pattern, the time histories of the drag and lift forces, power spectral density and phase diagrams, etc. It is found that these results include both the periodic (lock-in) and the quasi-periodic (non-lock-in) state. The vortex shedding frequency equals the driving frequency in the lock-in region but is independent in the non-lock-in region. The mean drag and the maximum lift coefficient increase with the increase of the forcing amplitude in the lock-in state. The lock-in boundaries are also established from the present direct numerical simulation.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2148-2158
• /
• 1996

Uncoupled, quasi-static and linear thermoviscoelastic problems are analyzed in time domain by the finite element approximation which is developed using the principle of virtual work and viscoelasticity matrices instead of shear and bulk relaxation functions as in usual formulations. The material is assumed to be isotropic, homegeneous and thermorheologically simple, which means that the temperature-time equivalence postulate is effective. The stress-strain laws are expressed by relaxation-type hereditary integrals. In spatial and time discritizations, isoparametric quadratic quadrilateral finite elements and linear time variations are adopted. For explicit derivations, the viscoelastic material is assumed to behave standard linear solid in shear and elastically in dilatation. Two-dimensional examples are solved under general temperature distributions T = T(x, t), and compared with other opproximate solutions to show the versatility of the presented analysis.

• 한국항공우주학회지
• /
• 제30권8호
• /
• pp.1-9
• /
• 2002

압력비에 따라 유동 구조가 달라지는 박리 노즐 유동을 수치적인 방법으로 해석하였다. 축대칭 Navier-Stokes 식에 유한 체적법을 적용하여 공간 차분항에는 AUSM 기법, 시간 차분항은 2차의 시간 정확도를 가지는 기법을 사용하였다. 형상이 주어진 노즐 유동은 압력비에 따라 1차원 해석해가 존재하지만, 수치적으로 해석된 축대칭 노즐 유동은 매우 복잡한 유동 구조를 나타내었다. 압력비에 따라 박리 또는 비박리 유동, 정상 또는 일정한 주기성을 가지는 비정상 유동, Regular reflection, recirculation이 존재하거나 존재하지 않는 Mach Reflection 등의 특징적인 유동을 가지고 있었다. 본 연구에서는 이러한 유동 구조 중에서 박리 노즐 유동을 고찰하여 일정한 규칙성을 가지고 유동 구분을 하였다.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.127-132
• /
• 2008

최근, 지진하중에 대한 대공간구조무의 응답특성에 관한 연구가 다수 수행되었으며, 라이즈/스팬비가 큰 지붕구조에 대하여서는, 수평지진입력에 대한 역대칭모드의 증폭이 지배적으로 됨이 지적되었다. 본 연구에서 제안하는 정적지진하중평가법에서는, 라이즈가 있는 지붕구조의 내진설계를 수행함에 있어, 허용응력도설계법을 따르며, 그림1과 같이 설계용전단력를 지붕면에 따라 부가하는 정적평가법을 채용하고 이를 정적지진하중평가법이라 부르기로 한다. 본 논문의 구성으로서는, 정적평가법의 개념 및 정적설계식의 유도과정을 나타내고, 라이즈/스팬비가 서로 다른 지붕구조물을 대상으로 하여, 본 평가법에 의한 결과와 정적응답해석을 수행한 결과를 비교하고, 정적평가법의 타당성에 대하여 검토한다.

• Journal of Communications and Networks
• /
• 제7권3호
• /
• pp.307-312
• /
• 2005

In this work, we study the performance of a serial concatenated scheme comprising a convolutional code (CC) and an orthogonal space-time block code (STBC) separated by an inter-leaver. Specifically, we derive performance bounds for this concatenated scheme, clearly quantify the impact of using a CC in conjunction with a STBC, and compare that to using a STBC code only. Furthermore, we examine the impact of performing antenna selection at the receiver on the diversity order and coding gain of the system. In performing antenna selection, we adopt a selection criterion that is based on maximizing the instantaneous signal-to­noise ratio (SNR) at the receiver. That is, we select a subset of the available receive antennas that maximizes the received SNR. Two channel models are considered in this study: Fast fading and quasi-static fading. For both cases, our analyses show that substantial coding gains can be achieved, which is confirmed through Monte-Carlo simulations. We demonstrate that the spatial diversity is maintained for all cases, whereas the coding gain deteriorates by no more than $10\;log_{10}$ (M / L) dB, all relative to the full complexity multiple-input multiple-output (MIMO) system.

• 대한공간정보학회지
• /
• 제11권4호
• /
• pp.13-19
• /
• 2003

본 연구는 비측량용 디지털 비디오 카메라를 이용하여 석조문화재인 석탑을 대상으로 촬영하였다. 비측량용 카메라인 디지털 비디오 카메라는 기존의 측량용 또는 준측량용 카메라에서 하지 못하는 방법이 있으며, 이는 촬영된 동영상을 가지고 분석하고자 하는 부분을 손쉽게 정지영상으로 취득할 수가 있었다. 비측량용인 디지털 비디오 카메라로 문화재 3차원 해석에 있어서 $2mm{\sim}4mm$의 정확도를 얻을 수 있었다. 차후 문화재 원형 보존에 대한 계획의 수행에 있어서 문화재에 대한 자세한 정보를 제공하기 위해 효율적이고 경제적인 방법을 제시하고자 한다.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.563-575
• /
• 2007

This contribution contained the classical work of an open-hole tensile plate to demonstrate the performance of grating shearography and to compare with the results obtained by other full-field measurement techniques, The isotropic plate with an open-hole has often appeared in the previous contributions introducing novel full-field method and system. Grating shearography directly provided six quantitative measurands about the specimen's surface kinematics by using a single measurement set: three in-plane strains, in plane rotation, and two out-of-plane slopes. The quasi-plane wavefront of grating metrology led to high signal-to-noise ratio (SNR) and thus neither fitting nor filtering was applied, and the small shearing distance of $101{\mu}m$ could be used. The small shearing distance provided the outstanding spatial resolution of $80{\mu}m$ and sensitivity appropriate for experimental mechanics. Finally, the grating shearography enabled the visualization of the complex surface deformation around the hole and also detected parasitic flexions of the specimen in the micrometer regime during the tensile test.

• Smart Structures and Systems
• /
• 제24권2호
• /
• pp.173-182
• /
• 2019

Due to the degradation of beamforming properties at angles close to $0^{\circ}$ to $180^{\circ}$, linear array does not have a complete $180^{\circ}$ inspection range but a smaller one. This paper develops a improved sensor array with two additional sensors above and below the linear sensor array, and presents time difference and two dimensional multiple signal classification (2D-MUSIC) based impact localization for omni-directional localization on composite structures. Firstly, the arrival times of impact signal observed by two additional sensors are determined using the wavelet transform and compared, and the direction range of impact source can be decided in general, $0^{\circ}$ to $180^{\circ}$ or $180^{\circ}$ to $360^{\circ}$. And then, 2D-MUSIC based spatial spectrum formula using uniform linear array is applied for locate accurate position of impact source. When the arrival time of impact signal observed by two additional sensors is equal, the direction of impact source can be located at $0^{\circ}$ or $180^{\circ}$ by comparing the first and last sensor of linear array. And then the distance is estimated by time difference algorithm. To verify the proposed approach, it is applied to a quasi-isotropic epoxy laminate plate and a stiffened composite panel. The results are in good agreement with the actual impact occurring position.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2898-2914
• /
• 2022

When evaluating energy balance and temperature in reduced-scale fire experiments, which are conducted as an alternative to full-scale fire experiments, it is important to consider the similarity in the scale among these experiments. In this paper, a method considering the similarity of energy balance is proposed for setting the conditions for reduced-scale experiments of mechanically ventilated compartment fires. A small-scale fire experiment consisting of various cases with different compartment geometries (aspect ratios between 0.2 and 4.7) and heights of vents and fire sources was conducted under mechanical ventilation, and the energy balance in the quasi-steady state was evaluated. The results indicate the following: (1) although the compartment geometry varies the energy balance in a mechanically ventilated compartment, the variation in the energy balance can be evaluated irrespective of the compartment size and geometry by considering scaling factor F (∝h_effA_wR_T, where h_eff is the effective heat transfer coefficient, A_w is the total wall area, and R_T is the ratio of the spatial mean gas temperature to the exhaust temperature); (2) the value of R_T, which is a part of F, reflects the effects of the compartment geometry and corresponds to the distributions of the gas temperature and wall heat loss.

• 천문학회지
• /
• 제56권2호
• /
• pp.159-168
• /
• 2023

The main goal of the Korean VLBI Network Calibrator Survey (KVNCS) is to expand the VLBI calibrators catalog for KVN, KaVA (KVN and VERA Array), EAVN (East-Asian VLBI Network), and other extended regions. The second KVNCS (KVNCS2) aimed to detect VLBI fringes of new candidates for calibrators in the K band. Out of the 1533 sources whose single-dish flux density in the K band was measured with KVN telescopes (Lee et al. 2017), 556 sources were observed with KVN in the K band. KVNCS2 confirmed the detection of VLBI fringes of 424 calibrator candidates over a single baseline. All detected sources had a high Signal-to-Noise Ratio (SNR) of >25. Finally, KVNCS2 confirmed 347 new candidates as VLBI calibrators in the K band, resulting in a 5% increase in the sky coverage compared to previous studies. The spatial distribution was quasi-uniform across the observable region (Dec. > -32.5°). In addition, the possibility as calibrator candidates for the detected sources was checked, using an analysis of the flux-flux relationship. Ultimately, the KVNCS catalog will not only become the VLBI calibrator list but is also useful as a database of compact radio sources for astronomical studies.