• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6A
• /
• pp.589-599
• /
• 2004

Most models assume the complete debugging environments by requiring a complete software correction in quantitative evaluation of software reliability. But, in many case, new faults are involved in debugging works, for complete software correction is impossible. In this paper, software growth model is proposed about incomplete debugging environments by considering the possibility of new faults involvements, and software faults occurrence status are also mentioned about NHPP by considering software faults under software operation environments and native faults owing to the randomly involved faults in operation before test. While, effective quantitative measurements are derived in software reliability evaluation, applied results are suggested by using actual data, and fitnesswith existing models are also compared and analyzed.

• Journal of Korean Society of Rural Planning
• /
• v.22 no.4
• /
• pp.25-36
• /
• 2016

The purpose of this study is to construct a quantitative evaluation method that can analyze the policy effectiveness with the construction of a implicit composite index incorporating spatial econometrics models. In order to propose a methodological framework for the program evaluation, this study conducts an empirical analysis with the application of the Comprehensive Rural Village Development Project (CRVDP) which explicitly claims to achieve comprehensive goal of community development. The present study pays particular attention to quantifying the composite evaluation index and drawing net effect through the application of a series of spatial econometrics models. The spatial unit of the analysis is drawn at Eup-Myeon level in rural areas in Korea, and the time horizon is in between 2005 and 2010. We utilize the Korean Agricultural Census data in 2005 and 2010. Three steps of methodological processes are needed to satisfy the objective of the present study. First, we apply factor analysis to construct the composite index that represents comprehensive settlement environment in rural area. The index should be matched with the main objective of the CRVDP. Second, we apply the derived index to a series of spatial econometrics model as dependent variable. Lastly, utilizing the estimated coefficients of the econometrics models, we apply decomposition technique to estimate CRVDP's net effect from both cross-sectional and longitudinal perspectives. We find that the results of the decomposition analysis by the execution of the CRVDP are positively associated with the explicit object of the project.

• Journal of Periodontal and Implant Science
• /
• v.48 no.2
• /
• pp.124-134
• /
• 2018

Purpose: Clinicians must examine tooth wear to make a proper diagnosis. However, qualitative methosds of measuring tooth wear have many disadvantages. Therefore, this study aimed to develop and evaluate quantitative parameters using the cusp area and volume of virtual dental models. Methods: The subjects of this study were the same virtual models that were used in our former study. The same age group classification and new tooth wear index (NTWI) scoring system were also reused. A virtual occlusal plane was generated with the highest cusp points and lowered vertically from 0.2 to 0.8 mm to create offset planes. The area and volume of each cusp was then measured and added together. In addition to the former analysis, the differential features of each cusp were analyzed. Results: The scores of the new parameters differentiated the age and NTWI groups better than those analyzed in the former study. The Spearman ${\rho}$ coefficients between the total area and the area of each cusp also showed higher scores at the levels of 0.6 mm (0.6A) and 0.8A. The mesiolingual cusp (MLC) showed a statistically significant difference (P<0.01) from the other cusps in the paired t-test. Additionally, the MLC exhibited the highest percentage of change at 0.6A in some age and NTWI groups. Regarding the age groups, the MLC showed the highest score in groups 1 and 2. For the NTWI groups, the MLC was not significantly different in groups 3 and 4. These results support the proposal that the lingual cusp exhibits rapid wear because it serves as a functional cusp. Conclusions: Although this study has limitations due to its cross-sectional nature, it suggests better quantitative parameters and analytical tools for the characteristics of cusp wear.

• Journal of the Korean Institute of Gas
• /
• v.15 no.1
• /
• pp.60-67
• /
• 2011

The interest about new and renewable energy is increasing to reduce the burden of problems by depletion of fossil fuels and air pollutions. For example, LNG/CNG and LPG are expected to be replaced, especially in transportation use, by HCNG mixture and DME-LPG mixture, respectively. Because these new energies are still flammable gases, it is not inherently safe from the explosion. In this research, the quantitative risk analysis for using alternative mixtures in existing recharging facilities has been studied by using three types of explosion models (TNT equivalency model, PHAST and CFD-based FLACS) to manage the risk effectively. The differences of results by models were compared against, and the practical ways of when and how to use these models were suggested. It was also predicted that conventional gas filling stations would be converted as new energy stations without additional explosion risk.

• Korean System Dynamics Review
• /
• v.1 no.1
• /
• pp.103-131
• /
• 2000

If a system such as a port has a large boundary and complexity, and the system's substance is considered as a black box, forecast accuracy will be very low. Futhermore various components in a port exert significant influence on each other. To copy with these problem the form of structure models were introduced by using SD method. The Competitive Ports Model had several sub-systems consisting of each Unit Port models, and each Unit Port model was made by quantitative, qualitative factors and their feedback loops. The fact that all components of one port have influence on the components of the other ports should be taken into account to construct Competitive Port Models. However, with the current approach that is impossible, and in this paper therefore, models were simplified by HFP adapted to integrate level variables of unit port models. Although many studies on modelling of port competitive situation have been conducted, both theoretical frame and methodology are still very weak. In this study, a new algorithm called ESD(Extensional System Dynamics) for the evaluation of port competition was presented, and applied to simulate port systems in northeast asia.

• Archives of Plastic Surgery
• /
• v.47 no.5
• /
• pp.428-434
• /
• 2020

Background Three-dimensional (3D) model printing improves visualization of anatomical structures in space compared to two-dimensional (2D) data and creates an exact model of the surgical site that can be used for reference during surgery. There is limited evidence on the effects of using 3D models in microsurgical reconstruction on improving clinical outcomes. Methods A retrospective review of patients undergoing reconstructive breast microsurgery procedures from 2017 to 2019 who received computed tomography angiography (CTA) scans only or with 3D models for preoperative surgical planning were performed. Preoperative decision-making to undergo a deep inferior epigastric perforator (DIEP) versus muscle-sparing transverse rectus abdominis myocutaneous (MS-TRAM) flap, as well as whether the decision changed during flap harvest and postoperative complications were tracked based on the preoperative imaging used. In addition, we describe three example cases showing direct application of 3D mold as an accurate model to guide intraoperative dissection in complex microsurgical reconstruction. Results Fifty-eight abdominal-based breast free-flaps performed using conventional CTA were compared with a matched cohort of 58 breast free-flaps performed with 3D model print. There was no flap loss in either group. There was a significant reduction in flap harvest time with use of 3D model (CTA vs. 3D, 117.7±14.2 minutes vs. 109.8±11.6 minutes; P=0.001). In addition, there was no change in preoperative decision on type of flap harvested in all cases in 3D print group (0%), compared with 24.1% change in conventional CTA group. Conclusions Use of 3D print model improves accuracy of preoperative planning and reduces flap harvest time with similar postoperative complications in complex microsurgical reconstruction.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3111-3111
• /
• 2001

The implementation of NIR and chemometrics in the Pharmaceutical industries is still in strong progress, both regarding qualitative and quantitative applications and beneficial results are seen. Looking at the development so far, NIR will change the pharmaceutical industry even more in the future. This presentation will address the experiences and progress achieved regarding the application and implementation of quantitative methods for determination of content uniformity and assay of tablets with less than 10% w/w of active, using Near Infrared transmittance spectroscopy in combination with PLS. Also qualitative methods for identification of the same tablets by Near Infrared reflectance spectroscopy will be discussed. Four commercial tablet strengths are formulated and produced from two different compositions by direct compression. Three different strengths are dose proportional, i.e. fixed concentration by varying in size. The aim was to replace the conventional primary methods for analysing content uniformity, assay and identification by NIR. Studies were performed on comparing transmittance versus reflectance spectroscopy for both applications on the dose proportional tablets. The model for determination of content uniformity and assay was developed to cover both coated and uncoated tablets, whereas the qualitative model was developed to identify coated tablets only. The impact of the tablet formulation, tablet size and coating, resulted in individual models far each composition The best calibration was achieved using diffuse reflectance for the identification purposes and diffuse transmittance for the quantitative determination of the active content within the tablets. As NIR in combination with other techniques opens up the possibility of total quality management within the production, the transfer of the above-mentioned models from a laboratory based approach to an at-line approach at H.Lundbeck will be addressed too.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.133-142
• /
• 1998

In Bayesian SPECT reconstruction, the incorporation of elaborate forms of priors can lead to improved quantitative performance in various statistical terms, such as bias and variance. In particular, the use of higher-order smoothing priors, such as the thin-plate prior, is known to exhibit improved bias behavior compared to the conventional smoothing priors such as the membrane prior. However, the bias advantage of the higher-order priors is effective only when the hyperparameters involved in the reconstruction algorithm are properly chosen. In this work, we further investigate the quantitative performance of the two representative smoothing priors-the thin plate and the membrane-by observing the behavior of the associated hyperparameters of the prior distributions. In our experiments we use Monte Carlo noise trials to calculate bias and variance of reconstruction estimates, and compare the performance of ML-EM estimates to that of regularized EM using both membrane and thin-plate priors, and also to that of filtered backprojection, where the membrane and thin plate models become simple apodizing filters of specified form. We finally show that the use of higher-order models yields excellent "robustness" in quantitative performance by demonstrating that the thin plate leads to very low bias error over a large range of hyperparameters, while keeping a reasonable variance. variance.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.30-38
• /
• 2015

IT security service provides customers with the capability of protecting the networked information asset and infrastructures, and the scope of security service is expanding from a technology-intensive task to a comprehensive protection system for IT environment. To improve the quality of this service, a research model which help assess the quality is required. Several research models have been proposed and used in various service areas, but few cases are found for IT security service. In this work, a research model for the IT security quality has been proposed, based on research models such as SERVQUAL and E-S-QUAL. With the proposed model, factors which affect the service quality and the best quality measure have been identified. And the feasibility of using quantitative measures for quality has been examined. For analysis, structural equation modeling and various statistical methods such as principal component analysis were used. The result shows that satisfaction is the most significant measure affected by the proposed quality factors. Two quality factors, fulfillment and empathy, are the main determinants of the service quality. This leads to a strategy of quality improvement based on factors of emotion and perception, not of technology. The quantitative measures are considered as promising alternative measures, when combined with other measures. In order to design reliable quantitative measures, more work should be done on target processing time and users' expectation. It is hoped that work of this research will provide efficient tools and methods to improve the quality of IT security service and help future research works for other IT service areas.

• Molecules and Cells
• /
• v.44 no.7
• /
• pp.500-516
• /
• 2021

Cardiac hypertrophic signaling cascades resulting in heart failure diseases are mediated by protein phosphorylation. Recent developments in mass spectrometry-based phosphoproteomics have led to the identification of thousands of differentially phosphorylated proteins and their phosphorylation sites. However, functional studies of these differentially phosphorylated proteins have not been conducted in a large-scale or high-throughput manner due to a lack of methods capable of revealing the functional relevance of each phosphorylation site. In this study, an integrated approach combining quantitative phosphoproteomics and cell-based functional screening using phosphorylation competition peptides was developed. A pathological cardiac hypertrophy model, junctate-1 transgenic mice and control mice, were analyzed using label-free quantitative phosphoproteomics to identify differentially phosphorylated proteins and sites. A cell-based functional assay system measuring hypertrophic cell growth of neonatal rat ventricle cardiomyocytes (NRVMs) following phenylephrine treatment was applied, and changes in phosphorylation of individual differentially phosphorylated sites were induced by incorporation of phosphorylation competition peptides conjugated with cell-penetrating peptides. Cell-based functional screening against 18 selected phosphorylation sites identified three phosphorylation sites (Ser-98, Ser-179 of Ldb3, and Ser-1146 of palladin) displaying near-complete inhibition of cardiac hypertrophic growth of NRVMs. Changes in phosphorylation levels of Ser-98 and Ser-179 in Ldb3 were further confirmed in NRVMs and other pathological/physiological hypertrophy models, including transverse aortic constriction and swimming models, using site-specific phospho-antibodies. Our integrated approach can be used to identify functionally important phosphorylation sites among differentially phosphorylated sites, and unlike conventional approaches, it is easily applicable for large-scale and/or high-throughput analyses.