• Journal of Pharmaceutical Investigation
• /
• 제39권3호
• /
• pp.185-199
• /
• 2009

Using a strain-controlled rheometer [Advanced Rheometric Expansion System (ARES)], the steady shear flow properties and the dynamic viscoelastic properties of $Antiphlamine-S^{(R)}$ lotion have been measured at $20^{\circ}C$ (storage temperature) and $37^{\circ}C$ (body temperature). In this article, the temperature dependence of the linear viscoelastic behavior was firstly reported from the experimental data obtained from a temperature-sweep test. The steady shear flow behavior was secondly reported and then the effect of shear rate on this behavior was discussed in detail. In addition, several inelastic-viscoplastic flow models including a yield stress parameter were employed to make a quantitative evaluation of the steady shear flow behavior, and then the applicability of these models was examined by calculating the various material parameters. The angular frequency dependence of the linear viscoelastic behavior was nextly explained and quantitatively predicted using a fractional derivative model. Finally, the strain amplitude dependence of the dynamic viscoelastic behavior was discussed in full to elucidate a nonlinear rheological behavior in large amplitude oscillatory shear flow fields. Main findings obtained from this study can be summarized as follows : (1) The linear viscoelastic behavior is almostly independent of temperature over a temperature range of $15{\sim}40^{circ}C$. (2) The steady shear viscosity is sharply decreased as an increase in shear rate, demonstrating a pronounced Non-Newtonian shear-thinning flow behavior. (3) The shear stress tends to approach a limiting constant value as a decrease in shear rate, exhibiting an existence of a yield stress. (4) The Herschel-Bulkley, Mizrahi-Berk and Heinz-Casson models are all applicable and have an equivalent validity to quantitatively describe the steady shear flow behavior of $Antiphlamine-S^{(R)}$ lotion whereas both the Bingham and Casson models do not give a good applicability. (5) In small amplitude oscillatory shear flow fields, the storage modulus is always greater than the loss modulus over an entire range of angular frequencies tested and both moduli show a slight dependence on angular frequency. This means that the linear viscoelastic behavior of $Antiphlamine-S^{(R)}$ lotion is dominated by an elastic nature rather than a viscous feature and that a gel-like structure is present in this system. (6) In large amplitude oscillatory shear flow fields, the storage modulus shows a nonlinear strain-thinning behavior at strain amplitude range larger than 10 % while the loss modulus exhibits a weak strain-overshoot behavior up to a strain amplitude of 50 % beyond which followed by a decrease in loss modulus with an increase in strain amplitude. (7) At sufficiently large strain amplitude range (${\gamma}_0$>100 %), the loss modulus is found to be greater than the storage modulus, indicating that a viscous property becomes superior to an elastic character in large shear deformations.

• 동아시아식생활학회지
• /
• 제17권4호
• /
• pp.571-579
• /
• 2007

The aim of this study was to predict the development process of the Korean food service industry by forecasting the per capita GDP. Forecasting the GDP, involved two primary approaches. One was related to looking at the Korean food service industry's situation by per capita GDP and comparing it to that of the US and Japan. The other was to predict food service industry projections in Korea by quantitative forecasting models. Holt's simple exponential smoothing method and new types of the series models(Damped trend exponential smoothing method), were employed to predict the per capita GDP. The accuracy of the models was measured by MAPE. The empirical results of the forecasting models indicate that the three time series models performed fairly well. Of these Damped trend Damped trend exponential smoothing performed best with the lowest MAPE(9.9%). The results show that the time for reaching a per capita GDP level of $20,000 was 2008 with the Damped trend model and 2009 with the Holt model. Moreover, we found that a per capita GDP level of $30,000 will be achieved in 2012 from the Damped trend model and in 2013 from the Holt model. Within this study, the implications for the Korean food service industry are further discussed. It was predicted there will be a stabilization period in 2008 or 2009 in Korea with achievement of a per capita GDP of $20,000. At this time, major food service industry companies will need to invest in equipment toy external growth and there will be industry trends toward ethnic food and theme restaurants. Also, if a per capita GDP of $30,000 is achieved by 2012 or 2013, the Korean food industry will need to be highly responsive. Therefore, food industry companies should forecast and study customer values and prepare for changes.

• Journal of Pharmaceutical Investigation
• /
• 제37권3호
• /
• pp.137-148
• /
• 2007

Using a strain-controlled rheometer [Rheometrics Dynamic Analyzer (RDA II)], the steady shear flow properties of a semi-solid ointment base (vaseline) have been measured over a wide range of shear rates at temperature range of $25{\sim}60^{\circ}C$. In this article, the steady shear flow properties (shear stress, steady shear viscosity and yield stress) were reported from the experimentally obtained data and the effects of shear rate as well as temperature on these properties were discussed in detail. In addition, several inelastic-viscoplastic flow models including a yield stress parameter were employed to make a quantitative evaluation of the steady shear flow behavior, and then the applicability of these models was examined by calculating the various material parameters (yield stress, consistency index and flow behavior index). Main findings obtained from this study can be summarized as follows : (1) At temperature range lower than $40^{\circ}C$, vaseline is regarded as a viscoplastic material having a finite magnitude of yield stress and its flow behavior beyond a yield stress shows a shear-thinning (or pseudo-plastic) feature, indicating a decrease in steady shear viscosity as an increase in shear rate. At this temperature range, the flow curve of vaseline has two inflection points and the first inflection point occurring at relatively lower shear rate corresponds to a static yield stress. The static yield stress of vaseline is decreased with increasing temperature and takes place at a lower shear rate, due to a progressive breakdown of three dimensional network structure. (2) At temperature range higher than $45^{\circ}C$, vaseline becomes a viscous liquid with no yield stress and its flow character exhibits a Newtonian behavior, demonstrating a constant steady shear viscosity regardless of an increase in shear rate. With increasing temperature, vaseline begins to show a Newtonian behavior at a lower shear rate range, indicating that the microcrystalline structure is completely destroyed due to a synergic effect of high temperature and shear deformation. (3) Over a whole range of temperatures tested, the Herschel-Bulkley, Mizrahi-Berk, and Heinz-Casson models are all applicable and have an almostly equivalent ability to quantitatively describe the steady shear flow behavior of vaseline, whereas the Bingham, Casson,and Vocadlo models do not give a good ability.

• Journal of Pharmaceutical Investigation
• /
• 제29권3호
• /
• pp.193-203
• /
• 1999

In order to investigate systematically the steady shear flow properties of aqueous po1y(ethylene oxide) (PEO) solutions having various molecular weights and concentrations, the steady flow viscosity has been measured with a Rheometrics Fluids Spectrometer (RFS II) over a wide range of shear rates. The effects of shear rate, concentration, and molecular weight on the steady shear flow properties were reported in detail from the experimentally measured data, and then the results were interpreted using the concept of a material characteristic time. In addition, some flow models describing the non-Newtonian behavior (shear-thinning characteristics) of polymeric liquids were employed to make a quantitative evaluation of the steady flow behavior, and the applicability of these models was examined by calculating the various material parameters. Main results obtained from this study can be summarized as follows: (1) At low shear rates, aqueous PEO solutions show a Newtonian viscous behavior which is independent of shear rate. At shear rate region higher than a critical shear rate, however, they exhibit a shear-thinning behavior, demonstrating a decrease in steady flow viscosity with increasing shear rate. (2) As an increase in concentration and/or molecular weight, the zero-shear viscosity is increased while the Newtonian viscous region becomes narrower. Moreover, the critical shear rate at which the transition from the Newtonian to shear-thinning behavior occurs is decreased, and the shear-thinning nature becomes more remarkable. (3) Aqueous PEO solutions show a Newtonian viscous behavior at shear rate range lower than the inverse value of a characteristic time $1/{\lambda}_E$, while they exhibit a shear-thinning behavior at shear rate range higher than $1/{\lambda}_E$. For aqueous PEO solutions having a broad molecular weight distribution, the inverse value of a characteristic time is not quantitatively equivalent to the critical shear rate, but the power-law relationship holds between the two quantities. (4) The Cross, Carreau, and Carreau-Yasuda models are all applicable to describe the steady flow behavior of aqueous PEO solutions. Among these models, the Carreau-Yasuda model has the best validity.

• 한국조경학회지
• /
• 제49권4호
• /
• pp.30-40
• /
• 2021

본 연구는 국내에서 식재빈도가 높은 7개 조경수종을 대상으로 수관의 우수차집비율을 분석하고, 이를 기반으로 수종별 단목의 연간 우수차집량을 유추하는 계량모델을 마련하였다. 연구대상 수종은 느티나무, 단풍나무, 소나무, 왕벚나무, 은행나무, 잣나무, 전나무 등이었다. 수종별 수관의 평균 우수차집비율은 각각 잣나무 35.8%, 전나무 34.1%, 느티나무 31.0%, 소나무 27.6%, 은행나무 26.9%, 단풍나무 18.6%, 왕벚나무 18.4% 등의 순이었다. 계량모델의 r²은 0.90~0.99 범위로서 적합도가 높았다. 수종별 연간 우수차집량은 흉고직경 20cm 기준 느티나무가 5.1m³/주/년으로서 가장 많았고, 이어서 잣나무 4.1m³/주/년, 전나무 3.1m³/주/년, 은행나무 2.8m³/주/년, 소나무 2.1m³/주/년, 왕벚나무 1.9m³/주/년, 단풍나무 1.8m³/주/년 등의 순이었다. 수관폭 4m 기준의 경우에는 잣나무가 5.0m³/주/년으로서 가장 많았고, 이어서 전나무 4.4m³/주/년, 느티나무 4.1m³/주/년, 은행나무 3.3m³/주/년, 소나무 2.9m³/주/년, 단풍나무 2.1m³/주/년, 왕벚나무 1.9m³/주/년 등의 순으로 나타났다. 즉, 도시조경수의 연간 우수차집량은 상록수 또는 수관밀도가 높은 수종이 많은 경향이었다. 본 연구는 도시녹지의 우수차집 효과 관련 연구가 미진한 국내 현실에서, 조경수의 연간 우수차집량을 산정할 수 있는 초석을 새롭게 마련하였다. 이 연구결과는 정부, 지자체, 및 기업에서 시행하는 생태조경 사업과 관련하여 조경수의 우수차집 효과를 평가하는 공공기반기술로서 유용할 것으로 기대한다.

• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.2007-2016
• /
• 2005

An artificial neural network (ANN) is successfully presented for prediction acidity constant (pKa) of various benzoic acids and phenols with diverse chemical structures using a nonlinear quantitative structure-property relationship. A three-layered feed forward ANN with back-propagation of error was generated using six molecular descriptors appearing in the multi-parameter linear regression (MLR) model. The polarizability term $(\pi_1)$, most positive charge of acidic hydrogen atom $(q^+)$, molecular weight (MW), most negative charge of the acidic oxygen atom $(q^-)$, the hydrogen-bond accepting ability $(\epsilon_B)$ and partial charge weighted topological electronic (PCWTE) descriptors are inputs and its output is pKa. It was found that properly selected and trained neural network with 205 compounds could fairly represent dependence of the acidity constant on molecular descriptors. For evaluation of the predictive power of the generated ANN, an optimized network was applied for prediction pKa values of 37 compounds in the prediction set, which were not used in the optimization procedure. Squared correlation coefficient $(R^2)$ and root mean square error (RMSE) of 0.9147 and 0.9388 for prediction set by the MLR model should be compared with the values of 0.9939 and 0.2575 by the ANN model. These improvements are due to the fact that acidity constant of benzoic acids and phenols in water shows nonlinear correlations with the molecular descriptors.

• BMB Reports
• /
• 제43권7호
• /
• pp.480-484
• /
• 2010

The Bombyx mori Microarray Database (BmMDB; http://silkworm.swu.edu.cn/microarray) provides information for tissue-specific gene expression by using the whole-genome oligonucleotide microarray in the silkworm. We analyzed the tissue-specific expression patterns in the silk gland, fat body, and midgut five days of fifth instar larvae during the development of B. mori. To verify the tissue-specific expression, analysis was conducted using quantitative Real-time RT-PCR and the highly expressed endogenous Actin RNA as an intrinsic reference. Finally, we confirmed five genes, (sw15872, sw00692, sw20990, sw05300,and sw2250), out of 18 candidates expressed in two different tissues, which was consistent with the data published by Dr. Xiang's group, thereby supporting the BmMDB. Further studies for promoter regions of candidate genes can be applied in creating transgenic silkworms as biomedical insects for use in producing biomaterials, and to serve as well-characterized models for understanding the mechanism for the genetic regulation of tissue-specific development.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1529-1529
• /
• 2001

The watercore in apple is very important factor in storage and sorting of fruit. Most consumers tend to prefer the apple included watercore in immediately after harvest, however the watercore causes fruit flesh to brown during storage and lose the worth after all. But it is practically impossible to judge to the naked eye whether an apple has watercore or not. Therefore, the rapid, accurate and non-destructive analysis method for discrimination of watercore should be settled without delay. In this study we attempted the discrimination and quantitative analysis of watercore in apple fruit using near-infrared transmittance spectroscopy ‘Fuji’ apple fruits produced in Kyungpook of Korea was used in this experiment. The watercore content in apple was evaluated by graphic treatment of culled slice sections(10 mm). NIR transmittance spectra were collected over the 500 to 1000 nm spectral region with a spectrometer (Sentronic Co., Germany). The calibration models were carried out by partial least squares (PLS) analysis between NIR spectra data of apples and chemical data of watercore content. The spectra were different in absorbance between apple included watercore and not included one. Apple included watercore had higher absorption band than sample not included one at 732 and 820 nm. The calibration model seems to be accurate to predict the watercore content in apple fruit, the correlation coefficient (R) and root mean square error of prediction (RMSEP) were 0.99 and 0.93%, respectively. This result indicates that the PLSR calibration model by using NIR transmittance spectroscopy could be used for discrimination of watercore in apple fruit.

• 한국가스학회지
• /
• 제18권3호
• /
• pp.67-74
• /
• 2014

인구가 밀집되어 있는 도심지역에 매설된 천연가스 공급배관은 외부 또는 내부 결함으로 인한 가스의 누출, 확산, 화재, 폭발로 발생되는 재산과 인명피해의 큰 잠재위험을 지니고 있다. 사고를 미연에 방지하기 위해 정량적 평가에 기초한 위험관리를 실시하고 있으며, 매설배관의 정량적 위험성을 평가하기 위해서는 우선적으로 사고피해영향 분석을 통한 화학물질의 누출량 계산, 확산 분석, 화재 및 폭발로 인한 복사열과 압력파 계산이 필요하다. 본 논문에서는 CCPS, TNO에서 제안하는 model 들을 통하여 실제 San Bruno 매설배관 폭발 사고 시나리오를 기반으로 천연가스의 누출량, Fireball의 복사열 계산을 수행하고 결과 값을 실제 피해결과와 비교분석 하였다.

• 한국지역지리학회:학술대회
• /
• 한국지역지리학회 2009년도 하계학술대회 발표집
• /
• pp.108-115
• /
• 2009

An increase in oil and gas plants caused by development of process industry have brought into the increase in use of flammable and toxic materials in the complex process under high temperature and pressure. There is always possibility of fire and explosion of dangerous chemicals, which exist as raw materials, intermediates, and finished goods whether used or stored in the industrial plants. Since there is the need of efforts on disaster damage reduction or mitigation process, we have been conducting a research to relate explosion model on the background of real 3D terrain model. By predicting the extent of damage caused by recent disasters, we will be able to improve efficiency of recovery and, sure, to take preventive measure and emergency counterplan in response to unprepared disaster. For disaster damage prediction, it is general to conduct quantitative risk assessment, using engineering model for environmentaldescription of the target area. There are different engineering models, according to type of disaster, to be used for industry disaster such as UVCE (Unconfined Vapor Cloud Explosion), BLEVE (Boiling Liquid Evaporation Vapor Explosion), Fireball and so on, among them.we estimate explosion damage through UVCE model which is used in the event of explosion of high frequency and severe damage. When flammable gas in a tank is released to the air, firing it brings about explosion, then we can assess the effect of explosion. As 3D terrain information data is utilized to predict and estimate the extent of damage for each human and material. 3D terrain data with synthetic environment (SEDRIS) gives us more accurate damage prediction for industrial disaster and this research will show appropriate prediction results.