• Journal of the Korean Society of Safety
• /
• v.34 no.3
• /
• pp.50-56
• /
• 2019

Precast members have relatively good quality because they are manufactured in an environment suitable for quality control. A typical precast method in which pre-fabricated segments are assembled in the field requires a joint. Although the joint is a small part of the member, it greatly affects the behavior and quality of the structural member. In the previous study of this paper, the flexural strength of a joint, which is generally applied to half-depth precast deck systems, was verified to have higher strength than the design requirement. In addition, the proposed joint has been verified to have higher strength by reinforcing the connecting rebar. However, even if the flexural strength of the joints is sufficient, excessive deflection or lack of fatigue performance is likely to cause cracks in the half-depth precast deck system. In this study, the serviceability of the half-deck precast panel specimens with joints was evaluated and the experimental verification was conducted to evaluate the fatigue performance of the joint without connection rebar. As a result, the serviceability such as deflection and crack width was found to be higher than the design requirement in all the specimens. In the fatigue test, the fatigue effect was insignificant even in the absence of connection rebar.

• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.289-298
• /
• 2015

Purpose: This study examined the problem of crack formation in the fire control system(FCS) of the K11 objective individual combat weapon(OCIW), using design of experiment analysis. Three hypothesis were considered. The first hypothesis is that bolted joint has an effect on impulse caused by firing the weapon and the second hypothesis is that a short time interval of shooting has an effect on impulse and lastly, the third hypothesis is that a positive correlation has between the bolted joint of the FCS and the impulse. Methods: The relationship between the bolted joint and the impulse cause by firing the weapon were examined experimentally. The first and second hypothesis was tested using correlation analysis and the t-test. Results: Using ANOVA, the first null hypothesis was rejected and the alternative hypothesis was accepted. ANONA confirmed the second null hypothesis. Correlation analysis dismissed the last null hypothesis. A positive correlation between the bolted joint and the impulse caused by shooting the weapon was verified. Conclusion: The bolted joint of the K11 FCS and the barrel of the K11 affect the impulse caused by firing the weapon. A positive correlation was established between the bolted joint of the FCS and the impulse on firing the K11 OICW.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.3
• /
• pp.421-430
• /
• 2010

This work describes a derivation process of JIC(Joint Integrating Concept) based JFC(Joint Functional Concept) analysis of an Aegis BMD(Ballistic Missile Defense). JIC is developed through JOC(Joint Operating Concept) and JFC based on capstone strategy and concept. Aegis BMD is a sea-based ballistic missile defense to detect ballistic missile threat, increase engagement battlespace and enable multiple engagement based on Aegis ships. Aegis BMD is a good case of JIC due to performing an Joint operations based on System of Systems under highly complicated NCW environment. This work analyses JFC using QFD(Quality Function Deployment) and UJTL(Universal Joint Task List). From this analysis the JIC of Aegis Korean BMD is derived using a CASE tool.

• Journal of Welding and Joining
• /
• v.20 no.3
• /
• pp.122-128
• /
• 2002

The laser welding in the automotive industries has been used widely for the butt joint of blank sheets rather than the lap joint of automotive body panels. But as a substitute far the spot welding of automotive body panels, the so called three dimensional laser welding will be important far the body panel engineers. Specially the laser welding of body panels with a smooth weld line is applied increasingly, for example, to the side panels. So far, some criteria of the laser weld quality was suggested by in-house regulations or national standards from experiences and/or rule of thumbs. In the manufacturing places, a go or no-go criterion is adopted because of the simplicity or a lack of rational criteria. It is true specially for the selection of the process parameters, which gives the basic causes for the good quality of laser welds. In this study, the effects of joint combination, gap and welding speed on the lap joint $CO_2$ laser welding of two mild steel sheets with different thicknesses are obtained through a $2{\times}3{\times}7$ factorial experiment. The results of the weld quality are statistically analysed using analysis of variance (ANOVA) and compared between two characteristic zones, which are separated by the type of sectional shapes and the level of input energy per volume. The thickness combinations are 0.8mm/1.2mm, 1.2mm/0.8mm of mild steel sheets. The welding speed covers from the deep penetration to the partial penetration. The gap size has three levels of no-gap, 0.16m, and 0.26mm. The bead width, penetration depth and input energy per volume are measured and used as the weld quality criteria.

• International Journal of Korean Welding Society
• /
• v.3 no.2
• /
• pp.24-28
• /
• 2003

This study was aimed to evaluate the quality of flash welded joints and optimize the welding process for flash butt welding of 780MPa grade high strength steel. And then the relationship between the welding process variables and the joint quality would be established. The effect of process variables between flashing and upsetting process was elucidated. Microstructure observation of the joint indicated that the decarburized band was mainly changed with upsetting process. Width of HAZ was also related to the upsetting conditions rather than the flashing conditions. Generally maximum hardness at HAZ was correlated with Ceq of steel and the empirical relationship was obtained to estimate the HAZ properties. Tensile elongation at the joint was usually decreased with increasing the initial clamping distance. Investigation of fracture surface after tensile and bending tests reveal that the origin of cracking at the joint was oxide inclusions composed of $SiO_2$, MnO, $Al_2O_3$, and/or FeO. The amount of inclusions was dependent on the composition ratio of Mn/Si in steel. If this ratio was above 4, the amount of inclusions was low and then the resistance to cracking at the joint was enough to maintain the joint performance. It was obtained that the flashing process influenced the conditions for the energy input to establish uniform or non­uniform molten layer, while the upsetting conditions influenced the joint strength. Heat input variable during flashing process was also discussed with the joint properties.

• Korean Journal of Agricultural Science
• /
• v.33 no.1
• /
• pp.11-16
• /
• 2006

Joint marketing defines marketing activity which aims scale economies, quality improvement, and reducing marketing costs, through regrouping and sharing roles between farmers, regional cooperative, and national agriculture cooperative federation. As a case study for joint marketing, an empirical analysis was done for strawberry joint marketing in Nonsan city and future directions for joint marketing were deduced.

• Journal of muscle and joint health
• /
• v.5 no.1
• /
• pp.72-82
• /
• 1998

The purpose of this study was to identify functional impairment and psychological status and to analyze their relationships in patients with chronic arthritis. The sample was consisted of 75 arthritic patients who visited H hospital and S welfare center. Functional impairment was measured by ADL, pain, and the number of painful joint. Psychological status was measured by depression, self-efficacy, and quality of life. Data was analyzed by frequency, mean ${\pm} SD$, Pearson's correlation coefficient, and Stepwise multiple regression. The results of this study were as follows : 1. In functional Impairment, ADL was below average which means somewhat difficult, pain was above average, and the number of painful joint was 9.20. 2. In psychological status, scores of quality of life was 97.89, depression was 41.28, self-efficacy was 895.35. 3. Pain was negatively correlated to self-efficacy, ADL and quality of life, and positively correlated to depression. 4. Self efficacy and depression explained 45% of the variance in quality of life. Therefore, it is suggested that nursing intervention improving psychological status would be useful for patients with chronic arthritis. Especially, it is very important to implement nursing intervention focused on increasing self-efficacy and decreasing depression.

• The Journal of Information Systems
• /
• v.21 no.3
• /
• pp.187-214
• /
• 2012

Supply chain management(SCM) helps firms in integrating their business by collaborating with other value chain partners to meet the unpredictable demand of the end user. Agility is the fundamental characteristic of a supply chain needed for survival in turbulent and volatile markets, which are becoming norms as product life cycles shorten and environmental forces create additional uncertainty resulting in higher risk in the supply chain management. Literature reviews reveals various factors that could affect the agility. The objective of this study is to derive interdependence, partnership, quality of information, joint problem solving, modelize the mutual influential relationship between them, and look into the influential relationship influencing the agility. To test the proposed model, we used a data set generated from survey. Date analysis was conducted using 122 respondents. We used structural equation model (SEM) implemented in partial least square(PLS). The results of this study can be summarized as follows. Interdependence had a significant impact on partnership. Partnership had a significant impact on quality of information and joint problem solving. Quality of information had a significant impact on joint problem solving. Quality of information and joint problem solving had a significant impact on agility. This study diagnoses that Inter-organizational relationship characteristics are important for supply chain agility. Inter-organizational relationship characteristics are considered as an essential factor for supply chain agility.

• Archives of Reconstructive Microsurgery
• /
• v.9 no.2
• /
• pp.134-138
• /
• 2000

Arthrodesis of the ankle joint is inevitable in the cases of severe arthrosis or defective bony structures around ankle joint. There have been many kinds of arthrodesis methods were introduced. In cases with failed athrodesis with previous arthrodesis surgery and neuropathic joints have difficulty to achieve fusion of joint with conventional methods. Authors underwent four cases of ankle fusion with vascularized fibular graft from 1997 in the cases of three failed fusions and one diabetic neuropatic joint. Two of four performed free vascularized fibular transplantation from contralateral side leg with microvascular anastomosis, two of four performed with pedicled fibular transposition to the ankle joint in same side leg. Three of four cases achieved arthrodesis average 9.2 months after surgery, one case was failed due to vascular thrombosis of the anastomosed site in diabetic neuropathic condition. The result of this technique revealed 75%(three of four) success rate and longer bone union time required. However, in these cases had no recommendable options with conventional bone graft and additional ankle joint fusions procedure because of poor bone quality and defect of distal tibia and talus portions. Free vascualrized fibular transfer to the failed athrodesis of ankle joint is one of the effective alternative methods in failed ankle fusion cases, especially the quality of the bone around previous fusion site is poor.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.147-154
• /
• 2010

In post-tensioned concrete pavement(PTCP), one of the most important design variables is the initial joint width, in addition to the tensioning spacing. The joint width between PTCP slabs directly affects noise and ride quality. If the joint width is too wide, noise increases and ride quality decreases. If the initial joint width is too narrow, on the other hand, under high temperature, PTCP slabs can blow up, or failures near the joint can occur due to excessive compressive stresses. This study was conducted to determine the optimal initial joint width of PTCP and to investigate the joint width behavior under temperature changes. The experiments were performed using one-year-old PTCP slabs. The concrete temperatures were measured using the temperature measurement sensors installed at various depths. The joint widths were measured using vernier-calipers at different times of a day and the relationship between the joint width and temperature was analyzed. From this study, the design methodology to determine the optimal initial joint width of PTCP could be proposed.