• 제목/요약/키워드: q-w

Search Result 880, Processing Time 0.024 seconds

Load Transfer Mechanism of Drilled Shafts in Weathered Rock (풍화된 암반에 근입된 현장타설말뚝의 하중전이기구)

  • ;Cho Sung-Min;Jung Sung-Jun;Kim Myoung-Mo
    • Journal of the Korean Geotechnical Society
    • /
    • v.21 no.5
    • /
    • pp.187-196
    • /
    • 2005
  • Since the allowable bearing capacities of piles in weathered/fractured rock are mainly governed by settlement, the load-displacement behavior of pile should be known accurately. To predict pile head settlement at the design stage, the exact understanding of the load-transfer mechanisms is essential. Therefore, in this research, the load-transfer mechanism of drilled shaft socketed into weathered rock was investigated. For the investigation, five cast-in-place concrete piles with diameters of 1,000 mm were socketed into weathered gneiss. The static axial load tests and the load-transfer measurements were performed to examine the axial resistant behavior of the piles. A comprehensive field/laboratory testing program on weathered rock at the Held test sites was also performed to describe the in situ rock mass conditions quantitatively. And then, the effect of rock mass condition on the load transfer mechanism was investigated. The f-w (side shear resistance-displacement) curve of the pile in moderately weathered rock reached to yielding point at a for millimeter displacements, and after yielding point, the rate of resistance increment dramatically decreased. However, the f-w curve in the highly/completely weathered rock did not show the obvious yielding point, and the resistance gradually increased showing the hyperbolic pattern until relatively high displacement (>15 mm). The q-w (end bearing resistance-displacement) curves showed linear response at least until the base displacement of approximately 10 mm, regardless of rock mass conditions.

Characteristics of Coda Wave Attenuation in the Kyungsang Basin (경상분지에서의 Coda파의 감쇠특성)

  • 김성균
    • Proceedings of the Earthquake Engineering Society of Korea Conference
    • /
    • 1999.04a
    • /
    • pp.35-40
    • /
    • 1999
  • In order to know the characteristics of attenuation of coda wave in the Kyungsang Sedimentary Basin quality factor for coda wave or coda Q is estimated from the earthquake data recorded in the KIGAM microearthquake network. The single scattering model for coda wave generation is adopted in estimating coda Q. Coda Q appears to be largely dependent on the normalized time(a) which is the ratio of elapsed time to S-wave travel time. In the present study coda Q(Qc) is estimated in the range of a=1.5-3.Q and expressed in terms of frequency(f). The deduced function in the range of 1 to 25 Hz is Qc=36.8283 f1.15095 to represent the strong dependence of coda Q on frequency. It is found that the difference of Qc between U-D N-S and E-W components is negligible, This face supports the back-scattering theory that coda were originates from scattered waves by randomly distributed heterogeneities in the crust. On the other hand it is observed that the coda Q increases with depth.

  • PDF

The Major Common Technology Field Analysis of Domestic Mobile Carriers based on Patent Information Data (특허 자료 정보 기반 국내 이동통신 사업자 주요 공통 기술 분야 분석)

  • Kim, Jang-Eun;Cho, Yu-Seup;Kim, Young-Rae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.5
    • /
    • pp.723-737
    • /
    • 2017
  • In order to decide the national technical standards policy for national policy/market economy activities, the people in charge commonly make policy decisions based on the current technology level/concentration/utilization by means of major common technology field analysis using patent data. One possible source of such patent data is the domestic mobile carriers through the Korea Intellectual Property Rights Information System (KIPRIS) of the Korean Intellectual Property Office (KIPO). Using this system, we collected 20,294 patents and 152 International Patent Classification (IPC) types and confirmed KTs (9,738 cases / 47.98%), which perform relatively high technology retention activities compared to other mobile carriers through the KIPRIS of KIPO. Based on these data, we performed three analyses (SNA, PCA, ARIMA) and extracted 30 IPC types from the SNA and 4 IPC types from the PCA. Based on the above analysis results, we confirmed that 4 IPC (H04W, H04B, G06Q, H04L) types are the major common technology field of the domestic mobile carriers. Finally, the number of 4 IPC (H04W, H04B, G06Q, H04L) forecast averages of the ARIMA forecast result is lower than the number of existing time series patent data averages.

On the ring of integers of cyclotomic function fields

  • Bae, Sunghan;Hahn, Sang-Geun
    • Bulletin of the Korean Mathematical Society
    • /
    • v.29 no.1
    • /
    • pp.153-163
    • /
    • 1992
  • Carlitz module is used to study abelian extensions of K=$F_{q}$(T). In number theory every abelian etension of Q is contained in a cyclotomic field. Similarly every abelian extension of $F_{q}$(T) with some condition on .inf. is contained in a cyclotomic function field. Hence the study of cyclotomic function fields in analogy with cyclotomic fields is an important subject in number theory. Much are known in this direction such as ring of integers, class groups and units ([G], [G-R]). In this article we are concerned with the ring of integers in a cyclotomic function field. In [G], it is shown that the ring of integers is generated by a primitive root of the Carlitz module using the ramification theory and localization. Here we will give another proof, which is rather elementary and explicit, of this fact following the methods in [W].[W].

  • PDF

Analysis of effectiveness for a stirling machine regenerator (스터링기기 재생기의 유용도 해석)

  • Jo, Gwan-Sik;Lee, Dae-Yeong;No, Seung-Tak
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.20 no.4
    • /
    • pp.1426-1436
    • /
    • 1996
  • The effectiveness of the regenerator pertaining to Stirling cycle machines is studied by analyzing the heat transfer characteristics of the oscillating flow in a tube, and a new consistent definition of the regenerator effectiveness can be expressed by the ratio of the heat transfer in axial direction (Q$\_$axial/) to that in transverse direction (Q/su w/), and its approximate form is obtained as a function of Nusselt number for practical utility. Since an approximate value of the ratio Q$\_$axial//Qsub w/ can be expressed in terms of the time-averaged rather than transient temperatures, this expression is useful to estimate the heat transfer coefficient in the Stirling machine regenerator experimentally.

Relation between the Heat Budget and the Cold Water in the Yellow Sea in Winter (동계의 열수지 황해냉수와의 관계)

  • Han, Young-Ho
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.14 no.1
    • /
    • pp.1-14
    • /
    • 1978
  • To study the fluctuation of cold water in the East China Sea in summer heat budget of the Yellow Sea in winter was analysed based on the oceanographic and meteorological data compiled from 1951 to 1974. The maintain value of insolation was observed in December($160{\sim}190ly/day$), while the maximum in February ($250{\sim}260ly/day$). The range of the annual variation was found to be less than 50 ly/day. The value of the radiation term ($Q_s-Q_r-Q_h$) was remarkably small (mean 20 ly/day) in winter. It was negative value in December and January, and a positive value in February. The minimum total heat exchange from the sea ($Q_({h+c}$) was found value (471 ly/day) in February 1962, and the maximum (882 ly/day) in January 1963. The annual total heat exchange was minimum (588 ly/day) in 1962, and maximum (716 ly/day) in 1968. If the average deviation of mean water temperature at 50m depth layer were assumed to be the horizontal index ($C_h$) of colder water, $C_h$ is $C_h=\frac{{\Sigma}\limit_i\;A_i\;T_i}{{\Sigma}\limit_i\;A_i}$ where $A_i$ denotes the area of isothermal region and $T_i$ the value of deviation from mean sea water temperature. The vertical index ($C_v$) of cold water can be expressed similarly. Consequently the total index (C) of cold water equals to the sum of the two components, i.e. $C=C_h$$C_v$. Taking the deviation of mean sea surface temperature(T'w) in the third ten-day of Novembers in the Yellow Sea as the value of the initial condition, the following expressions are deduced : $C-T'w=32.06 - 0.049$ $\;Q_T$ $C_h-T'w/2=12.20-0.019\;Q_T$ $C_v-T'w/2=18.07-0.027\;Q_T$ where $Q_T$ denotes the total heat exchange of the sea. The correlation coefficients of these regression equations were found to be greater than 0.9. Heat budget was 588 ly/day in winter, and minimum water temperature of cold water was $18^{\circ}C$ in summer of 1962. The isotherm of $23^{\circ}C$ extended narrowly to southward up to $29^{\circ}N$ in summer. However, heat budget was 716 ly/day, and minimum water temperature of cold water was $12^{\circ}C$ in summer of 1968. The isotherm of $23^{\circ}C$ extended widely to southward up to $28^{\circ}30'N$ in summer. As a result of the present study, it may be concluded that the fluctuation of cold water of the East China Sea in summer can be predicted by the calculation of heat budget of the Yellow Sea in winter.

  • PDF

Analysis of Technology Convergence of 'Internet of Things' Patents in the Electronic Commerce by the CPC Code Technology (전자상거래(G06Q) 분야에서 '사물인터넷' 기술의 CPC 코드 기반 기술 융복합 분석)

  • Shim, Jaeruen
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.11 no.6
    • /
    • pp.678-683
    • /
    • 2018
  • This study deals with the analysis of a technology convergence of the IoT(Internet of Things) which is the key technology of the fourth industrial revolution. For this purpose, 77 patents with the Main Category CPC code G06Q50/10(Electronic Commerce Service) among the IoT patents filed after 2014 were analyzed. As a result of the Main-Sub Category analysis of CPC codes, the IoT has a strong relationship between "Electronic Commerce Service (G06Q50/10)" and G06Q(49 cases), H04L(40 cases), G08B(24 cases), G05B(21 cases), H04W(21 cases), H04N(16 cases), and so on. By using the methodology in this study, we can contribute the establishment of technology strategy and new value creation from the prediction of the possibility of the combination of technologies and to develop new patents among various new technologies.