• Title/Summary/Keyword: q-ratio

Search Result 901, Processing Time 0.03 seconds

Q measurement of two port RE cavity by scattering parameters (산란행렬에 의한 2단자망 RF 공동공진기의 Q 측정)

  • 한대현
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.4 no.4
    • /
    • pp.895-899
    • /
    • 2000
  • A method of measuring Q of a two port cavity by scattering parameters is proposed. The scattering parameters of a two port cavity resonator are derived by a lumped equivalent circuit model as a function of cavity parameters, including the cavity Q. These can be also obtained by direct measurement with a modern network analyzer, The results show good agreement with those from other well-known methods. This two port measurement can provide additional information such as the coupled power ratio, which is one of the important parameters for the beam accelerating cavities.

  • PDF

A Study on the Fracture Behavior of a Crack in 9% Ni Steel Considering Constraint Effect (구속효과를 고려한 9% Ni강 균열의 파괴거동 해석에 관한 연구)

  • Kim, Young Kyun;Yoon, Ihn soo;Kim, Jae Hoon
    • Journal of the Korean Institute of Gas
    • /
    • v.25 no.6
    • /
    • pp.14-21
    • /
    • 2021
  • Inner shell material of LNG storage tanks that store ultra-low temperature LNG at -162℃ requires structural integrity assessment of a crack-like defect. From the viewpoint of conventional fracture mechanics, the assessment has mainly performed by single parameter using stress intensity factor K, J-integral and CTOD. However, the stresses in a material of crack tip are not unique caused by constraint loss due to size and geometry of the structure. Various attempts have been made to complement a single parameter fracture mechanics, typically with Q-stress. In this paper, we have performed a two-parameter approach by deriving the Q-stress coupling with J-integral suitable for the evaluation of the crack tip stress field in the non-linear elastic region. A quantitative evaluation of the constraint effect has performed by using the J-Q approach. It was evaluated that the SENB type specimen had a crack ratio of 0.1 to 0.7 and the wide type specimen had a crack ratio of 0.2 to 0.6.

Improvement in Image Rejection of Multi-Port Junction-based Direct Receivers (다중 접합 기반 수신기의 영상 제거비 평가 및 향상 방법)

  • Park, Hyung Chul
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.49 no.9
    • /
    • pp.43-48
    • /
    • 2012
  • This paper presents an iterative single-frequency continuous-wave signal-based I/Q regeneration method for improving image-rejection performance of multi-port junction-based direct receivers (MPDRs). This paper analyzes I/Q regeneration in MPDRs as I/Q mismatch compensation for direct conversion receivers. Based on the analysis, this paper evaluates the accuracy of I/Q regeneration in terms of the image-rejection ratio (IRR). The proposed method improves the IRR performance more than 20 dB compared to existing I/Q regeneration methods. Simulation results show that MPDRs using the proposed method can achieve an IRR of more than 70 dB, and that the bit error rate performances are almost the same as those of conventional coherent demodulators, even in fading channels.

Estimation of Pollutant Load Delivery Ratio for Flow Duration Using L-Q Equation from the Oenam-cheon watershed in Juam Lake (유량-부하량관계식을 이용한 주암호 외남천 유역의 유황별 유달율 산정)

  • Choi, Dong-Ho;Jung, Jae-Woon;Lee, Kyoung-Sook;Choi, Yu-Jin;Yoon, Kwang-Sik;Cho, So-Hyun;Park, Ha-Na;Lim, Byung-Jin;Chang, Nam-Ik
    • Journal of Environmental Science International
    • /
    • v.21 no.1
    • /
    • pp.31-39
    • /
    • 2012
  • The objective of this study is to provide pollutant loads delivery ratio for flow duration in Oenam-cheon watershed, which is upstream watershed of Juam Lake. To calculate the delivery ratio by flow duration, rating curves and discharge-loads curves using measured data were established, then Flow Duration Curve(FDC) and pollutant loads delivery ratio curves were constructed. The results show that the delivery ratios for $BOD_5$ for abundant flow($Q_{95}$), ordinary flow($Q_{185}$), low flow($Q_{275}$), and drought flow($Q_{355}$) were 23.9, 12.7, 7.1, and 2.9%, respectively. The delivery ratios of same flow regime for T-N were 58.4, 31.2, 17.2 and 7.1%, respectively. While, the delivery ratios T-P were 17.3, 7.5, 3.4, and 1.1% respectively. In general, delivery ratio of high flow condition showed higher value due to the influence of nonpoint source pollution. Based on the study results, generalized equations were developed for delivery ratio and discharge per unit area, which could be used for ungaged watershed with similar pollution sources.

SCS Curve Number and temporal Variation of Rainfall (강우의 시간분포를 고려한 CN값 산정)

  • Cho, Hong-Je;Lee, Tae-Young
    • Journal of Korea Water Resources Association
    • /
    • v.36 no.2
    • /
    • pp.183-193
    • /
    • 2003
  • A relation between the temporal variation of rainfall and direct runoff was characterized using temporal indexes of rainfall(1st, 2nd, 3rd, and 4th moment). Curve Number has a relation with 1st and 2nd moment for AMCIII condition when the rainfall duration is relative (10th quantile). Also peak runoff ratio(QP/Q) has a relation with 1st and End moment for AMCIII condition as well as 3rd and 4th moment for AMC I condition. Considering all durations of rainfall, alternatively, Curve Number has a relation with 1st and 2nd moment for AMCIIIcondition besides every moments for AMC I condition. But peak runoff ratio(QP/Q) has few relations excepting 3rd and 4th moment for AMC I condition. As a results, temporal indexes of rainfall are useful to determine curve numbers regarding the temporal variation of rainfall.

Magnetic Properties of Ordered L12 FePt3: A First Principles Study

  • Kim, Dong-Yoo;Hong, Ji-Sang
    • Journal of Magnetics
    • /
    • v.16 no.3
    • /
    • pp.197-200
    • /
    • 2011
  • Using the full potential linearized augmented plane wave (FLAPW) method, the influences of uniform and tetragonal strains on the magnetic state have been explored for chemically ordered bulk $L1_2$ $FePt_3$. The ordered state displays antiferromagnetic $Q_1$ (AFM-$Q_1$) state but it transitions into antiferromagnetic $Q_2$ (AFM-$Q_2$) state at about 10% uniform strain. The ferromagnetic (FM) state is observed at 11% uniform strain. For tetragonal strain, it is also seen that the transition from AFM-$Q_1$ to AFM-$Q_2$ depends on the strength and direction of the applied strain. The FM state does not appear in this case. Magnetocrystalline anisotropy (MCA) calculations for tetragonal distortion reveal that the spin reorientation transition occurs. In addition, we find that the direction of magnetization and the magnitude of magnetic anisotropy energy strongly depend on the c/a ratio.

PROUHET ARRAY MORPHISM AND PARIKH q-MATRIX

  • K. JANAKI;R. ARULPRAKASAM;V.R. DARE
    • Journal of applied mathematics & informatics
    • /
    • v.41 no.2
    • /
    • pp.345-362
    • /
    • 2023
  • Prouhet string morphism has been a well investigated morphism in different studies on combinatorics on words. In this paper we consider Prouhet array morphism for the images of binary picture arrays in terms of Parikh q-matrices. We state the formulae to calculate q-counting scattered subwords of the images of any arrays under this array morphism and also investigate the properties such as q-weak ratio property and commutative property under this array morphism in terms of Parikh q- matrices of arrays.

Weight Loss and Nutrient Dynamics during Leaf Litter Decomposition of Quercus mongolica in Mt. Worak National Park

  • Mun, Hyeong-Tae
    • Journal of Ecology and Environment
    • /
    • v.32 no.2
    • /
    • pp.123-127
    • /
    • 2009
  • Weight loss and nutrient dynamics of Quercus mongolica leaf litter during decomposition were investigated from December 2005 through August 2008 in Mt. Worak National Park as a part of National Long-Term Ecological Research Program in Korea. The decay constant (k) of Q. mongolica litter was 0.26. After 33 months decomposition, remaining weight of Q. mongolica litter was 49.3$\pm$4.4%. Initial C/N and C/P ratios of Q. mongolica litter were 43.3 and 2,032, respectively. C/N ratio in decomposing litter decreased rapidly from the beginning to nine months decomposition, and then showed more or less constant. C/P ratio increased to 2,407 after three months decomposition, and then decreased steadily thereafter. N and P concentration increased significantly during decomposition. N immobilization occurred from the beginning through 18 months decomposition, and mineralization occurred afterwards in decomposing litter. P immobilized significantly from fifteen months during decomposition. K concentration decreased rapidly from the beginning to six months decomposition. However it showed an increasing pattern during later stage of decomposition. Remaining K decreased rapidly during early stage of decomposition. There was no net K immobilization. Ca concentration increased from the beginning to twelve months decomposition, and then decreased rapidly till twenty one months elapsed. However, it increased again thereafter. Ca mineralization occurred from fifteen months. Mg concentration increased during decomposition. There was no Mg immobilization during litter decomposition. After 33 months decomposition, remaining N, P, K, Ca and Mg in Q. mongolica litter were 79.2, 110.9, 36.2, 52.7 and 74.4%, respectively.

Fabrication of CVD SiC Double Layer Structure from the Microstructural Change Through Input Gas Ratio (입력기체비를 이용한 미세구조 변화로부터 화학증착 탄화규소의 복층구조 제작)

  • 오정환;왕채현;최두진;송휴섭
    • Journal of the Korean Ceramic Society
    • /
    • v.36 no.9
    • /
    • pp.937-945
    • /
    • 1999
  • In an effort to protect a RBSC(reaction -bonded SiC) tube SiC films from methyltrichlorosilane(MTS) by low pressure chemical vapor deposition were deposited in hydrogen atmosphere on the RBSC(reaction-bonded SiC) substrates over a range of input gas ratio(${\alpha}=P_{H2}/P_{MTS}=Q_{H2}/Q_{MTS}$=1 to 10) and deposition temperatures(T=1050~1300$^{\circ}C$). At the temper-ature of 1250$^{\circ}C$ the growth rate of SiC films increased and then decreased with decreasing the input gas ratio. The microstructure of SiC films was changed from granular type structure exhibiting (111) preferred orientation in the high input gas ratios to faceted columnar grain structure showing (220) in the low input gas ratios. The similar microstructure change was obtained by increasing the deposition temperature. These results were closely related to a change of deposition mechanism. Double layer structure having granular type and faceted ciolumnar grain structure from the manipulation of mechanism. Double layer structure having granular type and faceted columnar grain structure from the manipulation of the input gas ratio without changing the deposition temperatue was successfully fabricated through in -site process.

  • PDF

Electrooptic Characteristics of Xe-type Flat Fluorescent Lamps Studied by a Q-V Lissajous Method (Q-V Lissajous 방법을 이용한 Xe형 평판형 형광램프의 전기광학 특성 평가)

  • Kim, Young-Youb;Yu, Mi-Yeon;Ko, Jae-Hyeon;Ryu, Si-Hong;Lee, Seong-Eui
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2007.11a
    • /
    • pp.165-168
    • /
    • 2007
  • Electrooptic characteristics of Xe-type flat fluorescent lamps (FFL) have been investigated by using a Q-V Lissajous method. It was found that the luminance of the Mgo-coated FFL became more than doubled compared to normal FFLs operated at the same driving voltage, indicating the possibility of the efficacy improvement in the MgO-coated FFLs. Change in the driving condition, in particular, the duty ratio had effects on the electrooptic properties, and it was found that the duty ratio of 50% was the optimum condition from the viewpoints of the efficacy and the lamp voltage.

  • PDF