• 제목/요약/키워드: q-filter

검색결과 343건 처리시간 0.025초

초고속 무선통신 설비용 필터의 소형화에 관한 연구 (Miniaturization Technology of the Filter for High-speed Wireless Communication Systems)

  • 황재호;문준호
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2005년도 춘계학술대회논문집
    • /
    • pp.368-371
    • /
    • 2005
  • In this paper, a small band pass filter is designed using new probe type for wireless communication system. In order to provide a band pass filter which can be reduced in dimension, can be reduced in height, and can be surface-mounted. The filter was fabricated using $TE_{01{\delta}}$ mode dielectric resonator. The input/output probes are attached to coner portion of the rectangular metal cavity. Results of the manufactured filter$(12{\times}12{\times}8mm)$ show that the center frequency is 9.953GHz, the insertion loss is -2.98 dB, the 3dB-bandwidth is 15 MHz, and the lode Q is 663.

  • PDF

디지탈필터의 海洋學的 應용 (A Note on Oceanographic Applications of Digital Filters)

  • 김희준;강용규
    • 한국해양학회지
    • /
    • 제19권2호
    • /
    • pp.133-140
    • /
    • 1984
  • 디지탈필터(digital filter) 중에서 특히 순환필터(recursive filter)와 Hamming window를 사용한 종합필터(convolution filter)의 해양학적 응용에 대해 논하였다. 종합필터는 이해하기 쉬우며 설계가 간단하지만, 자료수가 많은 경우에는 비경제 적이다. 순환필터는 설계가 다소 복잡하지만, 필터의 특성이 좋으며 경제적이다. 여름철(1973∼1979) 부산 해안선에 평행한 바람과 감포의 표면해수온도간에 저주파(주기 5일 이상) 성분은 상관관계가 뚜렷하나, 고주파 성분은 상관관계가 거의 없음을 디지탈필터를 사용함으로써 밝혀 내었다.

  • PDF

단일 전류센서를 갖는 저가의 단상 반브릿지 APF (Low-cost Single-Phase HAIf-bridge Active Power Filter with One Current Sensor)

  • 김길동;신정렬;이우동;박현준;김희중
    • 한국철도학회논문집
    • /
    • 제7권3호
    • /
    • pp.173-179
    • /
    • 2004
  • This paper describes a low-cost single-phase active power filter, which consists of a half-bridge PWM inverter with a simple control circuit. In order to verify the performance of proposed active power filter, many computer simulations with EMTP codes and experimental works with a hardware prototype were done. Both results confirm that the proposed active power filter shows excellent performance to eliminate the harmonics generated in the single-phase non-linear load. The active power filter has advantage of low implementation cost and compact size, using a half-bridge inverter and a simple control circuit with only one current sensor. So, it can be fabricated as a plug-in type. This paper shows the necessity and a good possibility to apply such advantage to the electric railway system.

Compact CMOS C-Band Bandpass Filter Using lnterdigital Capacitor

  • Kang, In-Ho;Wang, Xu-Guang
    • 한국항해항만학회지
    • /
    • 제31권9호
    • /
    • pp.759-762
    • /
    • 2007
  • A novel miniaturized CMOS C-Band bandpass filter based on diagonally end-shorted coupled lines and interdigital capacitors is proposed. The utilized coupled lines structure reduced the configuration in size, as small as a few degrees. Moreover, the characteristic of interdigital capacitor, relatively high Q and good capacitance tolerance, accounts for the satisfied performance of this new filter. A two-stage bandpass filter was designed and fabricated with chip surface area only $1.02{\times}1.4\;mm^2$.

임피던스 공진기를 이용한 FR-4 임베디드 광대역필터 (FR-4 Embedded UWB Filter using Uniform Impedance Resonator)

  • 양창수;윤상근;박재영
    • 전기학회논문지
    • /
    • 제56권8호
    • /
    • pp.1471-1475
    • /
    • 2007
  • In this paper, a novel embedded ultra wideband (UWB) band-pass filter is presented on a FR-4 package substrate including high Dk resin coated copper (${\varepsilon}_r=30$) film. The proposed UWB filter is comprised of a parallel resonator with meander-type uniform impedance resonator (UIR) and two series resonators with high Q circular stacked spiral inductor and metal-insulator-metal (MIM) capacitor. In order to obtain excellent attenuation characteristics by generating attenuation poles in lower and upper stop bands, a single MIM capacitor is added to each resonator. The fabricated FR-4 embedded UWB filter has insertion loss of -1.0dB and return loss of -11dB, respectively. It has also extremely wide bandwidth (over 50%) and small size ($3.7{\times}4{\times}0.77\;mm^3$) which is compatible with LTCC devices.

강우유출수 모래 필터의 여과기능 및 폐색 현상에 대한 필터 여재 깊이의 영향 평가 (Evaluation of the Impact of Filter Media Depth on Filtration Performance and Clogging Formation of a Stormwater Sand Filter)

  • SegismundoEzequielQ.;이병식;김이형;구본홍
    • 한국물환경학회지
    • /
    • 제32권1호
    • /
    • pp.36-45
    • /
    • 2016
  • 강우유출수 오염물 제거를 위한 침투시설에서 모래필터가 널리 적용된다. 공극폐색, 즉 필터 여재에 부유물이 침전되면 침투능이 저하되어 침투시설의 기능과 수명이 단축된다. 침투시설의 효과적인 설계 및 유지관리를 위해 모래필터 내의 물리적, 화학적, 생물학적 폐색 특성을 알아야 한다. 이 논문에서는 여재 깊이 변화에 따른 모래필터의 물리적 폐색 특성변화를 검토하였다. 연직방향, 변수위 침투조건에서 시행한 실험실 컬럼 침투실험으로부터 이들 특성변화를 관찰하였다. 실험결과, 폐색현상의 결과로서 필터의 여재 깊이가 증가할수록 부유물 제거효율이 증가하지만, 필터의 성능유지 기간은 감소하는 현상을 보였다. 모든 여재 깊이 조건에서 여재 깊이의 상부 15%에서 100~250 μm의 부유물이 침전되면서 폐색현상이 발현하는 조기폐색이 발생했다. 결과에 근거하여 침투시설의 첫번째 유지관리 시침투능 확보를 위해 여재깊이의 상부 15%를 긁어내는 방법을 제안할 수 있었다.

Fast Detection Algorithm for Voltage Sags and Swells Based on Delta Square Operation for a Single-Phase Inverter System

  • Lee, Woo-Cheol;Sung, Kook-Nam;Lee, Taeck-Kie
    • Journal of Electrical Engineering and Technology
    • /
    • 제11권1호
    • /
    • pp.157-166
    • /
    • 2016
  • In this paper, a new sag and peak voltage detector is proposed for a single-phase inverter using delta square operation. The conventional sag detector is from a single-phase digital phase-locked loop (DPLL) that is based on d-q transformations using an all-pass filter (APF). The d-q transformation is typically used in the three-phase coordinate system. The APF generates a virtual q-axis voltage component with a 90° phase delay, but this virtual phase cannot reflect a sudden change in the grid voltage at the instant the voltage sag occurs. As a result, the peak value is drastically distorted, and it settles down slowly. A modified APF generates the virtual q-axis voltage component from the difference between the current and the previous values of the d-axis voltage component in the stationary reference frame. However, the modified APF cannot detect the voltage sag and peak value when the sag occurs around the zero crossing points such as 0° and 180°, because the difference voltage is not sufficient to detect the voltage sag. The proposed algorithm detects the sag voltage through all regions including the zero crossing voltage. Moreover, the exact voltage drop can be acquired by calculating the q-axis component that is proportional to the d-axis component. To verify the feasibility of the proposed system, the conventional and proposed methods are compared using simulations and experimental results.

2.4 GHz 대역 2012사이즈 적층 LTCC 대역통과 필터의 설계 및 제작 (A 2012 Size Multilayer LTCC BPE for 2.4 GHz Band)

  • 이영신;송희석;박종철
    • 마이크로전자및패키징학회지
    • /
    • 제10권1호
    • /
    • pp.19-24
    • /
    • 2003
  • 본 연구에서는 LTCC(Low Temperature Co-firing Ceramic) 기술을 기반으로 한 적층 공정을 이용하여 최근 시장 수요가 증가하고 있는 2.4 GHz ISM(Industrial Science and Medical) 대역의 대역통과 필터를 제작하였다. 또한 제안된 설계방식은 사이즈의 초소형 필터의 구현이 가능케 하였다. $lambda/4$ 공진기의 한쪽에 부하 캐패시터를 적절히 형성시켜 공진기의 길이를 짧게 하는 효과와 더불어 공진기의 Q값과 저지대역 감쇄특성을 향상시킬 수 있었다. 제안된 필터는 결합 스트립 공진기의 커플링 계수와 외부단자 Q(Qe)값을 요구 사양에 맞게 최적화하여 이를 3차원 구조로 설계하였다. 제작된 대역통과 필터는 시뮬레이션을 통한 설계 값과 잘 일치하는 경향성을 보여주었다.

  • PDF

순시 무효 전력 고조파 검출방법을 이용한 단상 멀티레벨 능동전력 필터 (A Single Phase Multi-level Active Power Filter System using Instantaneous Reactive Power Harmonic Detection Method)

  • 김수홍;김성민;이강희;김윤호
    • 전력전자학회논문지
    • /
    • 제10권3호
    • /
    • pp.296-301
    • /
    • 2005
  • 본 논문은 고조파 검출방식의 하나인 순시무효전력을 이용한 검출방식을 단상용 능동전력필터에 적용할 수 있도록 하였다. 가상회로를 가정하여 단상시스템에도 $\alpha$-$\beta$변환 기법을 이용함으로서 순시무효전력 검출 방식이 용이하게 적용될 수 있도록 하였다. 그리고 고조파 보상 인버터는 멀티레벨 인버터를 사용하였으며 트랜스포머 없이 입력 전원에 연결되어 고조파를 보상할 수 있도록 하였다. 제안된 알고리즘은 시뮬레이션과 실험을 통하여 입증되었다.

Fully Embedded 2.4GHz Compact Band Pass Filter into Multi-Layered Organic Packaging Substrate

  • Lee, Seung-J.;Lee, Duk-H.;Park, Jae-Y.
    • 마이크로전자및패키징학회지
    • /
    • 제15권1호
    • /
    • pp.39-44
    • /
    • 2008
  • In this paper, fully embedded 2.4GHz WLAN band pass filter (BPF) was investigated into a multi-layered organic packaging substrate using high Q spiral stacked inductors and high Dk MIM capacitors for low cost RF System on Package (SOP) applications. The proposed 2.4GHz WLAN BPF was designed by modifying chebyshev second order filter circuit topology. It was comprised of two parallel LC resonators for obtaining two transmission zeros. It was designed by using 2D circuit and 3D EM simulators for finding out optimal geometries and verifying their applicability. It exhibited an insertion loss of max -1.7dB and return loss of min -l7dB. The two transmission zeros were observed at 1.85 and 6.7GHz, respectively. In the low frequency band of $1.8GHz{\sim}1.9GHz$, the stop band suppression of min -23dB was achieved. In the high frequency band of $4.1GHz{\sim}5.4GHz$, the stop band suppression of min -l8dB was obtained. It was the first embedded and the smallest one of the filters formed into the organic packaging substrate. It has a size of $2.2{\times}1.8{\times}0.77mm^3$.

  • PDF