• Current Optics and Photonics
• /
• 제7권5호
• /
• pp.562-568
• /
• 2023

We designed a combined nanostructure of inverted pyramidal pits and nanoparticles, which can obtain much stronger field enhancement than traditional periodic pits or nanoparticles. The field enhancement |E|/|E₀| is greater than 10 in a large area at 750-820 nm in incident wavelength. |E_max|/|E₀| is greater than 60. Moreover, the hot spot is obtained outside the pits instead of localized inside them, which is beneficial for experiments such as surface-enhanced Raman scattering. The relations between resonant wavelength and structural parameters are investigated. The resonant wavelength shows a linear dependence on the structure's period, which provides a direct way to tune the resonant wavelength. The excitation of a propagating surface plasmon on the periodic structure's surface, a localized surface plasmon of nanoparticles, and a standing-wave effect contribute to the enhancement.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2467-2470
• /
• 2009

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.623-631
• /
• 2011

Metallic sandwich panels based on a truss core structure have been developed for a wide range of potential applications with their lightweight and multi-functionality. Structural performance of sandwich panels can be predicted from the studies on mechanical behavior of a unit cell of truss core structures. Analytical investigations on the unit cell provide approximated guidelines for the design of overall core structures for a specific application in short time. In this study, the effects of geometrical parameters on mechanical behavior of a pyramidal shape of unit cell were investigated with analytical models. The unit cell with truss member angle of 45 degree was considered as reference model and other models were designed to have the same weight and projected area but different truss member angle. All truss members were assumed to be connected with pin joint in analytical models. Under the assumptions, the equivalent strength and stiffness of the unit cell under compressive and shear loads were predicted and compared. And finally, the optimum core member angle to have maximum mechanical property could be calculated and verified with FE analysis results.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.275-279
• /
• 2016

Additive manufacturing or 3D printing is a new manufacturing process and its application is getting growth. However, the product qualities such as mechanical strength, dimensional accuracy, and surface quality are low compared with conventional manufacturing process such as molding and machining. In this study not only mechanical characteristics of polymer sandwich panel having three dimensional core layer but also mechanical characteristics of core layer itself were analyzed. The shape of three dimensional core layer was pyramidal kagome structure. This core layer was fabricated by two different methods, injection molding with PP resin and material jetting type 3D printing with acrylic photo curable resin. The material for face sheets in the polymer sandwich panel was PP. Maximum load, stiffness, and elongation at break were examined for core layers fabricated by two different methods and also assembled polymer sandwich panels. 3D printed core showed brittle behavior, but the brittleness decreased in polymer sandwich panel containing 3D printed core. The availability of 3D printed article for the three dimensional core layer of polymer sandwich panel was verified.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3615-3620
• /
• 2013

Two novel copper(II) bromide complexes with pyridine containing Schiff base ligands, $Cu(pmed)Br_2$ and $Cu(pmed)Br_2$ where pmed = N'-((pyridin-2-yl)methylene)ethane-1,2-diamine (pmed) and dpmed = N,N-diethyl-N'-((pyridin-2-yl)methylene)ethane-1,2-diamine (dpmed) were synthesized and characterized using X-ray single crystal structure analysis, optical and magnetic susceptibility measurements. Crystal structural analysis of $Cu(pmed)Br_2$ showed that the copper(II) ion has a distorted square-pyramidal geometry with the trigonality index of ${\tau}=0.35$ and two intermolecular hydrogen bonds, which result in the formation of two dimensional networks in the ab plane. On the other hand, $Cu(pmed)Br_2$ displayed a near square-pyramidal geometry with the value of ${\tau}=0.06$. In both compounds, the NNN Schiff base and one Br atom occupy the basal plane, whereas the fifth apical position is occupied by the other Br atom at a greater Cu-Br apical distance. The reported complexes show $g_{\mid}$ > $g_{\perp}$ > 2.0023 with a $d_{x2-y2}$ ground state and a penta-coordinated square pyramidal geometry. Variable temperature magnetic susceptibility measurements showed that the developed copper(II) complexes follow the Curie-Weiss law, that is there are no magnetic interactions between the copper(II) ions since the Cu--Cu distance is too far for magnetic contact.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.354-359
• /
• 2005

The objective of this research work is to investigate into static characteristics of ISB panels with the pyramidal structure as a internally structured material. In order to investigate the behavior of material deformation and fracture characteristics, several tensile tests have been carried out for the ISB panel and skin sheet. Through the results of the experiments, the mechanical properties of ISB panel and skin sheet and fracture characteristics have been obtained. In addition, the mechanical properties of the ISB panel have been compared with that of the skin sheet by the view point of a specific modulus, a specific yield strength and a specific strength. From the results of the comparision, it has been shown that the ISB panel has an excellent static characteristics.

• 대한기계학회논문집A
• /
• 제38권9호
• /
• pp.943-951
• /
• 2014

마이크로/나노 압입시험에 사용되는 각뿔 혹은 원뿔형 압입자의 선단 형상은 제작한계 및 사용 중 마모 등으로 인해 필수적으로 곡면 형태를 띄게 된다. 많은 압입시험 관련 연구에서 각뿔형 압입자의 선단 형상은 편의상 구형으로 가정한 후, 얕은 압입에 대한 구형압입 이론식을 적용하고 있다. 이러한 가정에는 근본적으로 두 가지 문제점이 있는데, 첫 번째로 이론해의 정확성은 재료 물성치 및 압입자 형상에 따라 변화한다는 점이며, 두 번째로 각뿔형 압입자의 실제 선단 형상은 이상적인 구형이 아니라는 점이다. 본 연구에서는 유한요소해석에 기반하여 압입시험에 미치는 이 두 요소의 영향을 분석한다. 먼저 탄성 구형 압입시험에 대해 푸아송비와 하중-변위 곡선의 상관관계를 살펴보고, 이를 기반으로 수정된 구형 탄성 압입 관계식을 제시한다. 이어 가정된 Berkovich 선단 형상의 3차원 유한요소해석으로부터 압입깊이에 따른 하중-변위 곡선의 특성을 분석한다.

• 한국동물학회지
• /
• 제33권2호
• /
• pp.141-151
• /
• 1990

Raf protein kinases and protein kinase C는 세포질내 serine/threonine-specific protein에 속한다. 그리고 기능적인 구조와 세포내의 분포 양상은 서로 비슷하다. Raf family oncogene를 발현시키는 a-raf와 c-raf protein kinase에 대한 antibodies로써 남생이 대뇌의 raf protein kinase의 분포를 조사하였다. 일반적으로 raf protein kinase는 제한된 지역에서 즉,general pallium,hippocampal formation, pdmordiuin hippocampi,nucleus of lateral olfactory tract, basal amygdaloid nucleus와bed of stria terminalis에 나타났으며, c-raf protein kinase의 면역학적 labeling은 a-raf보다 그 범위가 넓었다. 그렇지만 labeling되는 intensity는 오히려 a-raf보다 낮았다. 그런데 a-raf에서 가장 명확한 좋은 예는 basal amygdaloid nucleus내의 구형모양의 세포인데, 이 세포는 세포질이 매우 강하게 labeling되어 지므로 ring모양과 같이 나타났다. 특히 c-raf는 protein kinase C 가 많이 나타나는 pyramidal 세포나 Purkinje세포에 많이 존재하는 것을 볼 때 protein kinase에 의하여 활성화되는 myc와 서로 상협작용을 유도한다고 제안하는 바이다.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.33-37
• /
• 2017

Single phase niobium nitride (NbN) coatings were deposited using asymmetric bipolar pulsed dc sputtering by varying pulse frequency and duty cycle of pulsed plasmas. Crystal structure, microstructure, morphology and mechanical properties were examined using XRD, FE-SEM, AFM and nanoindentation. Upon increasing pulse frequencies and decreasing duty cycles, the coating morphology was changed from a pyramidal-shaped columnar structure to a round-shaped dense structure with finer grains. Asymmetric bipolar pulsed dc sputtered NbN coatings deposited at pulse frequency of 25 kHz is characterized by higher hardness up to 17.4 GPa, elastic modulus up to 193.9 GPa, residual compressive stress and a smaller grain size down to 27.5 nm compared with dc sputtered NbN coatings at pulse frequency of 0 kHz. The results suggest that the asymmetric bipolar pulsed dc sputtering technique is very beneficial to reactive deposition of transition-metal nitrides such as NbN coatings.

• 대한인간공학회지
• /
• 제18권1호
• /
• pp.41-53
• /
• 1999

The effect of menu width and depth on the efficiency of information search and menu preference was investigated to identify an optimal menu structure for EIG which reflects the characteristics of human information processing. Information search time increased stepwisely as the menu width exceeded 6 items and linearly as the level of menu depth increased. The linear relationship between the error rate and the number of depth levels seems to be caused by the increase in the items to be remembered. When a menu structure was constructed by combining different menu depths and widths, it was observed that making the menu width wider rather than the depth deeper allows better information search. The menu structure rated as the most preferable and the easiest to user was that of pyramidal form. Such a result seems to come from its structural similarity to general categories which people get used to and implies that one should consider user preference as well as efficiency of search when he/she designs an EIG menu.