Browse > Article
http://dx.doi.org/10.4191/kcers.2017.54.1.02

Crystal Structure, Microstructure and Mechanical Properties of NbN Coatings Deposited by Asymmetric Bipolar Pulsed DC Sputtering  

Chun, Sung-Yong (Department of Advanced Materials Science and Engineering, Mokpo National University)
Im, Hyun-Ho (Department of Advanced Materials Science and Engineering, Mokpo National University)
Publication Information
Journal of the Korean Ceramic Society / v.54, no.1, 2017 , pp. 33-37 More about this Journal
Abstract
Single phase niobium nitride (NbN) coatings were deposited using asymmetric bipolar pulsed dc sputtering by varying pulse frequency and duty cycle of pulsed plasmas. Crystal structure, microstructure, morphology and mechanical properties were examined using XRD, FE-SEM, AFM and nanoindentation. Upon increasing pulse frequencies and decreasing duty cycles, the coating morphology was changed from a pyramidal-shaped columnar structure to a round-shaped dense structure with finer grains. Asymmetric bipolar pulsed dc sputtered NbN coatings deposited at pulse frequency of 25 kHz is characterized by higher hardness up to 17.4 GPa, elastic modulus up to 193.9 GPa, residual compressive stress and a smaller grain size down to 27.5 nm compared with dc sputtered NbN coatings at pulse frequency of 0 kHz. The results suggest that the asymmetric bipolar pulsed dc sputtering technique is very beneficial to reactive deposition of transition-metal nitrides such as NbN coatings.
Keywords
NbN; Asymmetric Bipolar; Pulsed sputtering; Duty cycle; Pulse frequency;
Citations & Related Records
Times Cited By KSCI : 8  (Citation Analysis)
연도 인용수 순위
1 G. Abadias, "Stress and Preferred Orientation in Nitridebased PVD Coatings," Surf. Coat. Tech., 202 [11] 2223-35 (2008).   DOI
2 H. M. Choi and S. K. Choi, "Residual Stress and Growth Orientation in $Y_2O_3$ Thin Films Deposited by Reactive Sputtering," J. Korean Ceram. Soc., 32 [8] 950-56 (1995).
3 S. N. Chvalun, J. Blackwell, J. D. Cho, Y. K. Kwon, V. Percec, and J. A. Heck "X-ray Analysis of the Internal Rearrangement of the Self-Assembling Columnar Structure Formed by a Highly Tapered molecule," Surf. Coat. Technol., 39 4515-22 (1998).
4 S. W. Park and S. Y. Chun "A Comparative Study of CrN Coatings Deposited by DC and Pulsed DC Asymmetric Bipolar Sputtering for a Polymer Electrolyte Membrane Fuel Cell Metallic Bipolar Plate," J. Korean Ceram. Soc., 50 [6] 390-95 (2013).   DOI
5 D. Cullity and S. R. Stock, Element of X-ray Diffraction; pp. 167, Pearson Education Limited, London, 2014.
6 S. M. Ko, S. M. Koo, J. H. Kim, W. S. Cho, and K. T. Hwang "Synthesis of Silicon Carbide Nano-Powder from a Silicon- Organic Precursor by RF Inductive Thermal Plasma," J. Korean Ceram. Soc., 49 [6] 523-27 (2012).   DOI
7 S. Y. Chun and T. Y. Lee "A Comparative Study of TiAlN Coatings Deposited by DC and Pulsed DC Asymmetric Bipolar Magnetron Sputtering," J. Kor. Inst. Surf. Eng., 47 [4] 168-73 (2014).   DOI
8 J. Lin, I. Dahan, B. Valderrama, and M. V. Manuel, "Structure and Properties of Uranium Oxide Thin Films Deposited by Pulsed DC Magnetron Sputtering," Surf. Coat. Technol., 301 [5] 475-80 (2014).
9 M. Wang, D. Wang, T. Kups, and P. Schaaf, "Size Effect on Mechanical Behavior of Al/Si3N4 Multilayers by Nanoindentation," Mater. Sci. Eng., A, 644 275-83 (2015).   DOI
10 A. A. Elmustafa and D. S. Stone, "Nanoindentation and the Indentation Size Effect: Kinetics of Deformation and Strain Gradient Plasticity," J. Mech. Phys. Sol., 51 357-81 (2003).   DOI
11 D. S. Stone, J. Migas, A. Martini, T. Smith, C. Muratore, A. A. Voevodin, and S. M. Aouadi, "Adaptive NbN/Ag Coatings for High Temperature Tribological Applications," Surf. Coat. Technol., 206 [19] 4316-21 (2012).   DOI
12 S. Y. Chun and J. Y. Hwang, "Effect of Duty Cycle and Pulse Frequency on the Microstructure and Mechanical Properties of TiAlN Coatings," J. Korean Ceram. Soc., 51 [5] 447-52 (2014).   DOI
13 Y. Gotoh, M. Nagao, and T. Ura, "Ion Beam Assisted Deposition of Niobium Nitride Thin Films for Vacuum Microelectronics Devices," Nucl. Instrum. Methods Phys. Res., Sect. B, 148 [1] 925-29 (1999).   DOI
14 R. D. Arnell and P. J. Kelly, "Recent Advances in Magnetron Sputtering," Surf. Coat. Technol., 112 [1] 170-76 (1999).   DOI
15 S. K. Kim, B. C. Cha, and J. S. Yoo, "Deposition of NbN Thin Films by DC Magnetron Sputtering Process," Surf. Coat. Technol., 177 [1] 434-40 (2004).
16 V. N. Zhitomirsky, I. Grimberg, L. Rapoport, N. A. Travitzkyd, R. L. Boxmana, S. Goldsmith, A. Raihel, I. Lapsker, and B. Z. Weiss, "Structure and Mechanical Properties of Vacuum Arc-Deposited NbN Coatings," Thin Solid Films, 326 [1] 134-42 (1998).   DOI
17 Y. Y. Yang, K. H. Kim, S. M. Lee, S. W. Kim, H. T. Kim, K. J. Kim, D. S. Lim, and S. K. Oh, "Microstructure and Wear Resistance of Ti-me-N (Me=V, Nb and Si) Nano Films Prepared by Hybrid PVD," J. Kor. Inst. Surf. Eng., 4 [3] 95-104 (2011).
18 A. Bendavid, P. J. Martin, and E. W. Preston "The Deposition of NbN and NbC Thin Films by Filtered Vacuum Cathodic Arc Deposition," Surf. Coat. Technol., 163 347-52 (2003).
19 D. H. Seo and S. Y. Chun, "A Comparative Study of CrN Coatings Deposited by DC and Inductively Coupled Plasma Magnetron Sputtering," J. Kor. Inst. Surf. Eng., 45 [3] 123- 29 (2012).   DOI
20 K. S. Nam, J. I. Moon, P. Kongsy, J. H. Song, and D. Y. Lim, "Influence of the Duty Cycle on the Characteristics of $Al_2O_3$ Coatings Formed on the Al-1050 by Plasma Electrolytic Oxidation," J. Korean Ceram. Soc., 50 [2] 108-18 (2013).   DOI
21 S. Wang, Y. Xia, L. Zhang, H. Guang, M. Shen, and F. Zhang, "Effect of NbN and ZrN Films Formed by Magnetron Sputtering on Ti and Porcelain Bonding," Surf. Coat. Technol., 205 [7] 1886-91 (2010).   DOI
22 S. Jun, J. Kim, S. Kim, Y. You, and B. Cha, "Characteristics of NbN Films Deposited on AISI 304 Using Inductively Coupled Plasma Assisted DC Magnetron Sputtering Method," J. Kor. Inst. Surf. Eng., 46 [5] 187-91 (2013).   DOI