• 공업화학
• /
• 제30권5호
• /
• pp.591-596
• /
• 2019

친환경 대체연료물질로서 ammonium dinitramide (ADN, $NH_4N(NO_2)_2$)는 상온에서 안전하고, 안정하지만 실제 적용을 위해서는 고순도가 요구된다. 소량의 불순물은 단일계 액상연료용 추력기 내 촉매의 분해반응을 억제하며, 비추력을 저하시키고, 노즐 막힘과 같은 부작용을 초래한다. 따라서 본 연구는 반복추출, 활성탄에 의한 흡착, 그리고 저온추출방법을 적용하여 합성한 ADN을 정제하였고, FT-IR, UV-Vis 및 IC 분석을 통하여 화학적인 순도를 평가하였으며, 최종 순도로서 IC 분석기준으로 99.82%를 획득하였다. 또한, ADN을 주 산화제로 활용하는 액상연료를 제조하였으며, 최소 $148^{\circ}C$에서 분해되는 단일계 추진제를 합성하였다. 그러나 상안정화를 위하여 우레아를 연료물질로 추가하였을 경우, 분해온도는 $188^{\circ}C$까지 상승하였다.

• Imaging Science in Dentistry
• /
• 제53권3호
• /
• pp.217-220
• /
• 2023

Purpose: This pilot study was conducted to evaluate half-value layer (HVL) measurements obtained using a semiconductor dosimeter for intraoral radiography. Materials and Methods: This study included 8 aluminum plates, 4 of which were low-purity (less than 99.9%) and 4 high-purity (greater than 99.9%). Intraoral radiography was performed using an intraoral X-ray unit in accordance with the dental protocol at the authors' affiliated hospital: tube voltage, 60 kVp and 70 kVp; tube current, 7 mA; and exposure time, 0.10 s. The accuracy of HVL measurements for intraoral radiography was assessed using a semiconductor dosimeter. A simple regression analysis was performed to compare the aluminum plate thickness and HVL in relation to the tube voltage (60 kVp and 70 kVp) and aluminum purity (low and high). Results: For the low-purity aluminum plates, the HVL at 60 kVp (Y) and 70 kVp (Y) was significantly correlated with the thickness of the aluminum plate (X), with Y=1.708+0.415X (r=0.999, P<0.05) and Y=1.980+0.484X (r=0.999, P<0.05), respectively. Similarly, for the high-purity aluminum plates, the HVL at 60 kVp (Y) and 70 kVp (Y) was significantly correlated with the plate thickness(X), with Y=1.696+0.454X (r=0.999, P<0.05) and Y=1.968+0.515X (r=0.998, P<0.05), respectively. Conclusion: This pilot study examined the relationship between aluminum plate thickness and HVL measurements using a semiconductor dosimeter for intraoral radiography. Semiconductor dosimeters may prove useful in HVL measurement for purposes such as quality assurance in dental X-ray imaging.

• 자원환경지질
• /
• 제52권1호
• /
• pp.107-118
• /
• 2019

태백산분지 북익부 고품위 석회석의 생성은 크게 동생적(syngenetic)과 후생적(epigenetic) 관점으로 나뉘어 있으며, 산소-탄소 안정동위원소 비 특성을 이용하여 이들의 생성환경을 고찰하였다. 북익부의 4개 광산(GMI, 정선, 백운, 백광)과 남익부의 상동(오미아)광산, 그리고, 삼척지역의 쌍용동해광산을 대상으로 하였으며, 이들과의 비교를 위해 정선지역 대기층 노두시료를 포함하였으며, 이들을 색상에 따라 암회색, 회색, 담회색, 백색으로 구분하였다. 산소 안정동위원소 비는 4.5 ~ 21.6 ‰의 넓은 범위의 변화를 보이지만, 탄소 안정동위원소 비는 -1.1 ~ 0.8 ‰ (방해석 맥 제외)로 매우 좁은 범위를 보여, 열수의 작용이 크지 않았음을 지시한다. 또한, 광산별, 색상별 산소-탄소 안정동위원소 비의 분포범위의 차이는 없으며, 주변 노두에서 채취된 탄산염암과 유사한 범위를 보이는 것으로 보인다. 이와 같은 결과는 고품위 석회석의 생성에 있어서 열수의 영향은 거의 없었다는 것을 지시한다. 산소 안정동위원소 비 값은 암석의 색상변화(백색화)보다는 조직의 변화와 관련되는데, 산소 안정동위원소 비 15 ‰ 전후를 기준으로 탄산염암의 산상을 구분할 수 있다. 이보다 높은 경우 괴상 또는 층리가 잘 보존된 특징을 보이는 반면, 낮은 경우 하나의 시료 내에서 두 가지 이상의 색상이 나타나고 있으며, 층리는 교란되거나 거의 소멸하여 흔적만 확인된다. 두 가지 이상의 색상이 나타나는 경우 밝은 부분이 어두운 부분에 비해 현저히 낮은 산소 안정동위원소 비를 보이는 경우가 다수 관찰되며, 이는 열수와의 반응에 의한 현상으로 해석된다. 다만, 이와 같은 현상은 소규모로 나타나고 있으며, 광상 전체적인 고품위 석회석의 생성에 대한 해석으로는 적당하지 않다. 특히, 재결정화한 백색의 탄산염암에서 높은 산소 안정동위원소 비 값을 보이는 것은 이 지역 탄산염암의 재결정화에 열수의 작용이 매우 적었음을 지시하며, 주변 마그마에 의한 열적 영향만을 받은 결과로 해석된다. 또한, 고품위 석회석광상 내 광체의 분포가 수평으로 연속적이며, 고품위 석회석 상하 주변에 백운석이 층상으로 협재되는 등의 산상을 고려할 때, 연구지역 고품위 석회석의 생성은 동생적(syngenetic) 해석이 보다 더 타당할 것으로 판단된다. 따라서, 태백산분지 전반적으로 순차층서적 관점에 의한 퇴적상의 해석이 필요할 것으로 사료되며, 이는 추가적인 고품위 석회석 광체의 확보에 매우 중요한 요소가 될 것이다.

• Journal of Microbiology
• /
• 제35권4호
• /
• pp.354-359
• /
• 1997

Methods for the extraction of DNA from water sample were approximated. Four different procedures of DNA extraction were carried out with pellets obtained from centrifugation of 4 liter water samples. The recovery efficiency and purity of DNA extracted by each method from different sources were compared. DNA yield varied with extraction methods, Method I, which involves enzymatic and freeze-thaw lysis steps and phenol and phenol-chloroform purification of extracted nucleic acid, showed a significantly higher yield and purity than the other methods. The use of glass beads in the DNA extraction methods improved the purity of DNA suitable for PCR. Bovine serum albumin in the PCR reaction mixture was useful in reducing inhibitory effects of contaminants. The efficiency of an extraction method was determined by the detection of the aer of Aeromonas hydrophila with PCR. The lower limit of detection of A. hydrophila from seeded tap water was 2 CFU/ml in PCR when method I was used for DNA preparation.

• 한국주조공학회지
• /
• 제11권3호
• /
• pp.236-244
• /
• 1991

This paper describes a study of the nucleation and growth of graphite crystal of levitation melted high purity Fe-C-Si alloys with emphasis on hypereutectic composition. Spherulitic graphite was observed to form at high purity alloy and converted to compacted by changing the starting iron from ultra-pure zone refined iron to 99.95 pct electrolitic iron. Residual C-C clusters might be acting as an effective nucleation site for graphite, and sulphur was the element to prevent graphite from nucleating. The graphite morphology changed from compacted to spherulitic as the sulphur content decreased.

• 멤브레인
• /
• 제4권1호
• /
• pp.1-8
• /
• 1994

There are growing needs to produce relatively high purity(99.0% or higher) oxygen at low cost. For small scale production, both pressure swing adsorption(PSA) and membrane process are competitive and less expensive or more convenient than well known cryogenic fractionation technology. A continuous membrane column(CMC) combined with a PSA oxygen generator can be employed to produce high purity oxygen continuously. The oxygen enriched gas generated by a PSA unit, with a concentration of 93~94%, is fed to the CMC that consism of three modules of poly(imide) hollow fibers. Several experiments were conducted by varying parameters, such as feed flow rate, transmembrane pressure drop, stage cut, and feed location in order to obtain a high oxygen concentration above 99.0%. A two-series unit mode was also employed with CMC operation to optimize the given membrane area.

• 한국세라믹학회지
• /
• 제16권1호
• /
• pp.13-20
• /
• 1979

High purity alumina has been extracted form low grade Korean alunite. Alunite ore was treated by 15% $NH_4OH$ solution, followed by 10% $H_2SO_4$ leaching and metallic impurities such as Fe and Ti were removed by solvent extraction method. Alumina prepared by the extraction process was 99.9% in purity. Hot Petroleum Drying Method has been employed for the preparation of uniformly fine alumina powder, using chemical reagent aluminum sulfate and ammonium aluminum sulfate extrated from Korea alunite. The sinterability of alumina powder prepared by Hot Petroleum Drying Method was shown to be improved in comparison with the one treated by other methods such as ball milling method, but dry pressing was difficult due to the agglomeration of calcined powder. The best slip of alumina powder prepared by Hot Petroleum Drying Method contained a lower soild content than the one treated by other methods. The alumina body formed by soild and drain casting with the former alumina powder showed a higher sintered density.

• 한국세라믹학회지
• /
• 제44권2호
• /
• pp.93-97
• /
• 2007

High purity Si powder was prepared in the system of $SiO_2-Mg$ combustion reaction. Various conditions of combustion reaction and leaching were investigated. As the particle size of Mg decreased and the compaction pressure increased the quantity of the unreacted power was decreased. In the acid leaching of MgO, increasing particle size, reaction temperature, rotating speed and reaction time made leaching effect low. Final Si powder produced by combustion and leaching reaction, has a high purity of 99.9% with irregular shape.

• Archives of Pharmacal Research
• /
• 제27권8호
• /
• pp.820-824
• /
• 2004

An optical purity test was indirectly performed on (S)-ibuprofen as its diastereomeric (R)-(+)-1-phenylethylamide derivative using achiral gas chromatography (GC). The method for the determination of trace (R)-ibuprofen (optical impurity), within the range 1.0 to 50 ng, from a racemic ibuprofen standard was linear (r＝0.9997) with acceptable precision (％ $RSD{\leq}5.3$) and accuracy (％ RE＝0.7~-3.9). Similar results were obtained with the method validation for the quantification of (S)-ibuprofen within the range 0.1 to 2.0 $\mu\textrm{g}$ using a (S)-ibuprofen stan-dard. When applied to seven different commercial (S)-ibuprofen products, their optical purities (98.7~99.1％) were determined with good precision (％ $RSD{\leq}4.0$).

• 대한방사성의약품학회지
• /
• 제2권2호
• /
• pp.132-136
• /
• 2016

Radiolysis is the process of decreasing in Radio-Chemical Purity (RCP) of [$^{18}F$]FDG by direct effect and indirect effect of self Radio-activity. The objective of our study was to figure out the ideal conditions which minimize damages of quality of [$^{18}F$]FDG using radical scavenger and controlling temperature of storage.