• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.175-176
• /
• 2008

In this study, the sintering properties and structural properties of the $Mg_5Ta_4O_{15}$cation-deficient perovskite ceramics with $Li_2CO_3$ additions are investigated. The cation-deficient perovskite ceramics are prepared through the solid-state route. According to the XRD pattern, $Mg_4Ta_2O_9$, $MgTa_2O_6$ and $Mg_5Ta_4O_{15}$ phase existed in sintered pure $Mg_5Ta_4O_{15}$ ceramics. With $Li_2CO_3$, additions, the peak intensities of $Mg_4Ta_2O_9$ and $MgTa_2O_6$ phase were reduced. Also, diffraction intensity of the $Mg_5Ta_4O_{15}$ phase was increased with increments of $Li_2CO_3$ additions. The bulk densities were increased with increasing of $Li_2CO_3$ amount and approach the theoretical density of the $Mg_5Ta_4O_{15}$ ceramics, more and more. Microstructure of the $Mg_5Ta_4O_{15}$ ceramics were densified more and more by additions of $Li_2CO_3$. The bulk density of $Mg_5Ta_4O_{15}$+5wt% $Li_2CO_3$ ceramics sintered at $1500^{\circ}C$ for 10 hours was $5.88g/cm^3$.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1442-1448
• /
• 2017

Recently, electric power systems have been operating with tight margins and have reached their operational limits. Many researchers consider a microgrid as one of the best solutions to relieve that problem. The microgrid is generally powered by renewable energies that are connected through power converters. In contrast to the rotational machines in the conventional power plants, the converters do not have physical rotors, and therefore they do not have rotational inertia. Consequently, a stand-alone microgrid has no inertia when it is powered by the only converter-based-generators (CBGs). As a result, the relationship between power and frequency is not valid, and the grid frequency cannot represent the power balance between the generator and load. In this paper, a superconducting flywheel energy storage system (SFESS) is applied to an inertia-free stand-alone (IFSA) microgrid. The SFESS accelerates or decelerates its rotational speed by storing or releasing power, respectively, based on its rotational inertia. Then, power in the IFSA microgrid can be balanced by measuring the rotor speed in the SFESS. This method does not have an error accumulation problem, which must be considered for the state of charge (SOC) estimation in the battery energy storage system (BESS). The performance of the proposed method is verified by an electromagnetic transient (EMT) simulation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.12
• /
• pp.1710-1720
• /
• 2008

A comprehensive genome profiling study was undertaken based on automated genotyping and analysis of 20 microsatellite markers that involved 155 birds representing eight different populations. The distribution of microsatellite markers in each of these breeds helped us to decipher genetic heterogeneity, population genetic structure and evolutionary relationships of the present day chicken populations in India. All the microsatellite loci utilized for the analysis were polymorphic and reasonably informative. A total of 285 alleles were documented at 20 loci with a mean of 14.25 alleles/locus. A total of 103 alleles were found to be population/strain specific of which, only 30 per cent had a frequency of more than 10. The mean PIC values ranged from 0.39 for the locus ADL158 to 0.71 for loci MCW005 or ADL267 across the genomes and 0.55 in Dahlem Red to 0.71 in Desi (non-descript), among the populations. The overall mean expected and observed heterozygosity estimates for our populations were 0.68 and 0.64, respectively. The overall mean inbreeding coefficients (FIS) varied between -0.05 (Babcock) and 0.16 (Rhode Island Red). The pairwise FST estimates ranged from 0.06 between Aseel and Desi (non-descript) to 0.14 between Dahlem Red and Babcock. The Nei's genetic distance varied from 0.30 (WLH-IWD and WLH-IWF) to 0.80 (Dahlem Red and Babcock. Phylogenetic analysis grouped all the populations into two main clusters, representing i) the pure breeds, Dahlem Red and Rhode Island Red, and ii) the remaining six populations/strains. All the chicken populations studied were in the state of mild to moderate inbreeding except for commercial birds. A planned breeding is advised for purebreds to revive their genetic potential. High genetic diversity exists in Desi (non-descript), local birds, which can be exploited to genetically improve the birds suitable for backyard poultry.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.3
• /
• pp.386-392
• /
• 2015

A novel recombinant bacmid, bEasyBm, that enables the easy and fast generation of pure recombinant baculovirus without any purification step was constructed. In bEasyBm, attR recombination sites were introduced to facilitate the generation of a recombinant viral genome by in vitro transposition. Moreover, the extracellular RNase gene from Bacillus amyloliquefaciens, barnase, was expressed under the control of the Cotesia plutellae bracovirus early promoter to negatively select against the nonrecombinant background. The bEasyBm bacmid could only replicate in host insect cells when the barnase gene was replaced with the gene of interest by in vitro transposition. When bEasyBm was transposed with pDualBac-EGFP, the resulting recombinant virus, EasyBm-EGFP, showed high levels of EGFP expression efficiency compared with that of non-purified recombinant virus BmGOZA-EGFP, which was constructed using the bBmGOZA system. In addition, nonrecombinant backgrounds were not detected in unpurified EasyBm-EGFP stocks. Based on these results, a high-throughput system for the generation of multiple recombinant viruses at a time was established.

• Nutrition Research and Practice
• /
• v.1 no.4
• /
• pp.266-272
• /
• 2007

The present study evaluated the effect of various dosages of soybean isoflavone extract on body weight changes, glucose tolerance and liver function in streptozotocin-induced diabetic rats. One group of normal rats (normal control) was fed an AIN-76-based experimental diet and four groups of diabetic rats were fed the same diet supplemented with four different levels of soybean isoflavone extract for seven weeks. The daily dosages of pure isoflavone for four diabetic groups were set to be 0 mg (diabetic control), 0.5 mg (ISO-I), 3.0 mg (ISO-II) and 30.0 mg (ISO-III) per kilogram of body weight, respectively. The daily consumption of isoflavone at the level of 3.0mg per kilogram of body weight resulted in the suppression of body weight loss and increased the survival rate of diabetic animals one and half times compared to that of the diabetic control group. Blood glucose levels in a fasting state and after the oral administration of glucose were significantly lower in the ISO-II group during the oral glucose tolerance test. The ISO-II group showed a tendency to elongate the gastrointestinal transit time. The activity of serum aminotransferases, indicator of liver function, was not negatively affected by any intake level of isoflavone. The present study demonstrated that the soybean isoflavone extract may be beneficial to diabetic animals by improving their glucose tolerance and suppressing weight loss without incurring hepatotoxicity at the daily dosage of 3.0 mg per kg of body weight.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.4
• /
• pp.330-337
• /
• 2005

La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.2/O/sub 3-δ/-based solid electrolytes in which Mg site was partially substituted by Fe, Co or Ni (0.05, 0.1, 0.15 at.％) were fabricated by conventional solid-state reaction and their sintered densities were above 94％ of theoretical density. X-ray diffraction analysis and microstructure observation for the sintered specimens were performed. The ac complex impedance were measured at 400。C to l000。C in air and fitted with a Solatron ZView program. The electrical conductivity of La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.2/O/sub 3-δ/-based solid electrolytes substituted by Fe, Co or Ni was higher than that of pure La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.2/O/sub 3-δ/. The electrical conductivity of La/sub 0.8/Sr/sub 0.2/Ga/sub 0.8/Mg/sub 0.05/Ni/sub 0.15/O/sub 3-δ/ electrolyte was 3.4×10/sup -2/ Scm/sup -1/ at 800。C and the highest value of the whole electrolytes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.166-173
• /
• 2001

Hysteresis loops of the ferroelectric thin films such as PLZT(10/30/70), PLT(10) and PZT(30/70) was simulated using the field-dependent polarization model and compared to the measured loops. In case of PZT(30/70) thin film, as the real saturation or polarization at the applied voltage or larger than 5V appears slack and its value is quite different from the simulated one, it is deduced that the ferroelectric polarization of PZT(30/70) is generated not only by the pure dipoles but also by various electric charges. The drain current of quasi-MFISFET is expressed by using the square-law FET and field-dependent polarization models. The modeling results are analogous to the experimental values. The channel of quasi-MFISFET using PZT(30/70) forms more quickly compared to that of quasi-MFISFET using PLZT(10/30/70) or PLT(10) in the state of 'write' gate voltage of -10V. This may be because the decrease rate of the polarization in the PZT(30/70) thin film is 3~4 times more rapid than that of the polarization in the PLZT(10/30/70) or the PLT(10) thin film in the retention characteristics.

• KSBB Journal
• /
• v.21 no.6 s.101
• /
• pp.405-409
• /
• 2006

Bokbunja (Rubus coreanus Miquel) is a wild berry belonging to Rosaceae genus of which application areas have been expanded due to many health effects. Bokbunja berry contains carbohydrates, protein, fats and dietary fibers as major components and various flavonoids such as tannins, volatile components including organic acids, alcohols and hydrocarbons as minor ones. Those active compounds attribute to the following health effects: increase in immune function and antioxidant activity, rise in hormone secretion, suppression of the growth of type B hepatitis virus, and control of weight gain. To utilize the above activities, many products have been developed by using Bokbunja berry extracts in the area of foods, liquors, and cosmetics. Recently, pure compounds have been isolated from the extracts for the development of medicines. In this mini review, the state-of-the-art of Bokbunja researches and applications including papers and patents is summarized.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.25-34
• /
• 2013

The paper reviews the state of art in the design of liquefaction processes for the production of liquified natural gas, and addresses key design aspects to be considered in the design and how these design issues are systematically reflected in industrial applications. Various design options to improve energy efficiency of refrigeration cycles are discussed, including cascaded or multi-level pure refrigeration cycles which are used for covering wide range of cooling temperature, as well as mixed refrigerant cycle which can maintain a simple structure. Heat integration technique has been used for graphically examining differences of commercial cycles discussed in this paper, while energy efficiency and economics of commercial liquefaction processes has been summarized. Discussion also has been made about how to select the most appropriate set of drivers for compressors used in the liquefaction plant.

• Journal of Advanced Marine Engineering and Technology
• /
• v.3 no.1
• /
• pp.19-31
• /
• 1979

Recently the adaptive control system, which keeps the control system always optimal by adjusting the control parameters automatically according to the variations of the plant parameters, have become very important in the field of control engineering. The adaptive control systems are usally composed of the plant identification, the decision of the optimal control parameters, and the adjustment of the control parameters. This paper deals with a method of the adaptive control system when PI or PID controller is used in the feed back control system. Its controlled object (the plant) is assumed to be described by the transfer function of $\frac{ke^{-LS}}{1+TS}$ where k, T and L are steady state gain, time constant and pure dead time respectively, and their values are variable in accordance with the change of environmental circumstance. It has been known that a pseudo-random binary signal is quite effective for the measurement of an impulse response of a plant. In adaptive control systems, however, the impulse response itself is not appropriate to determine the control parameters. In this paper, the authors propose a method to estimate directly the parameters of the plant k, T and L by means of the correlation technique using 3 level M-sequence signal as a test signal. The authors also propose a method to determine the optimal parameters of the PI or PID controller in the sense of minimizing the square integral of the control error in the feed back control system, and the values of the optimal parameters are computed numerically for various values of T and L, and the results are examined and compared with those of the conventional methods. Finally the above-mentioned two methods are combined and an algorithm to struct an adaptive control system is suggested. The experiments for the indicial responses by means of both the model of the temperature control system using SCR actuater and the analog simulations have shown good results as expected, and the effectiveness of the proposed method is verified. The M-sequence generator and the time delay circuit, which are manufactured for the experiments, are operated in quite a good condition.