• 한국의류학회지
• /
• 제16권3호
• /
• pp.243-250
• /
• 1992

The purposes of this research were to analyze factor structure and the face image to hairstyles which was made by Computer graphic simulation. To select ten hairstyle, a standard face selected between women of $20\~25$ years, and four factor (straight, curl, hair length, front hair, part hair) which were made of stand of hairstyle were applied. The results were as follows; 1 face image factor by hairstyle variation were found to five factor; negative and pogitive, indivisuality, youthfulness, unbanity, intelligence. 2. The result of analysis to face image by hairstyle factor were (1) In the hair state, straight hair was explained by the youthful, pure, decent image than curl. (2) In the hair length, the longer hair was explained by the more feminine, softness image. The shorter hair was explained by the more vigorous, youthful image. (3) In the presence of front hair, bang hair was explained by the commonness, moderate, classical image than all back hair (4) In the part hair, part hair was explained by the modern and unbanity image than no part hair.

• 한국염색가공학회지
• /
• 제21권6호
• /
• pp.56-63
• /
• 2009

In this study we have evaluated the separation characteristics and concentration of sericin using tubular type ultrafiltration membrane in silk degumming solution that extracted from electrolytic reduction water process. Ultrafiltration membranes have used in sericin separation performance and the separation characteristics of membrane satisfied typical Hagen-Poiseuille equation. It had the increase of flux according to the increase of feed pressure and temperature in occasion of pure water flux. And also the flux and solute rejection had about $25{\sim}60{\ell}/m^2{\cdot}h$ and more than 95% in sericin feed solution with concentration 1.00~1.89% at feed pressure force of $3{\sim}8kgf/cm^2$ respectively. In addition, the separation performance of tubular type ultrafiltration membrane for silk degumming solution was very steady-state with long experiment time.

• 한국재료학회지
• /
• 제30권2호
• /
• pp.74-80
• /
• 2020

Synthesis of composite powders for the Fe₂O₃-Zn system by mechanical alloying (MA) has been investigated at room temperature. Optimal milling and heat treatment conditions to obtain soft magnetic composite with fine microstructure were investigated by X-ray diffraction, differential scanning calorimetry (DSC) and vibrating sample magnetometer (VSM) measurement. It is found that α-Fe/ZnO composite powders in which ZnO is dispersed in α-Fe matrix can be obtained by MA of Fe₂O₃ with Zn for 4 hours. The change in magnetization and coercivity also reflects the details of the solid-state reduction process of hematite by pure metal of Zn during MA. Densification of the MA powders was performed in a spark plasma sintering (SPS) machine at 900 ~ 1,000 ℃ under 60 MPa. Shrinkage change after SPS of sample MA'ed for 5 hrs was significant above 300 ℃ and gradually increased with increasing temperature up to 800 ℃. X-ray diffraction results show that the average grain size of α-Fe in the α-Fe/ZnO composite sintered at 900 ℃ is in the range of 110 nm.

• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.822-826
• /
• 2008

We report the cathodoluminescence and aging properties of a series of green phosphors of formula $Sr_{1-x}M_xGa_2S_4$:Eu (x = 0.0-1.0, M = Ba or Ca) that have potential applications in field emission displays (FEDs). The series of phosphors was synthesized via NaBr-aided solid-state reactions in a flowing $H_2S$ stream. A low level ($\sim$20%) of Ba or Ca substitution for Sr in $SrGa_2S_4$:Eu maintains the orthorhombic phase of pure $SrGa_2S_4$:Eu phosphors. Further, a low level ($\sim$20%) of Ba or Ca substitution for Sr in $SrGa_2S_4$:Eu provides various green colors and sufficient brightness for FED applications. Substitution of Ba or Ca for Sr in $SrGa_2S_4$:Eu also improved the stability of the phosphor when it was operated under electron-beam irradiation of 5 kV.

• 한국연초학회지
• /
• 제25권1호
• /
• pp.70-79
• /
• 2003

$\beta$ -Glucosidase-catalysed synthesis of glucosides with aromatic alcohols and monoterpene alcohols as accepters and cellobiose as a donor in the presence of various commercial $\beta$ -glucosidases were described. $\beta$ -Glucosidases from Aspergillus niger spp,. Trichoderma spp., Penicillium sup. and bitter almond have been shown to catalyze synthesis of $\beta$ -glucosides of benzyl alcohol, 2-hydroxybenzyl alcohol, 4-hydroxybenzyl alcohol, 2-phenylethyl alcohol, geraniol and citronellol in the presence of cellobiose as sugar donor. Among enzyme preparations tested, each $\beta$ -glucosides prepared from Aspergillus niger were isolated in the pure state by Diaion HP-20 and silica gel column chromatography. The products were identified as $\beta$ -glucosyl products of benzyl alcohol, 2-hydroxyhenzyl alcohol, 4-hydroxybenzyl alcohol, 2-phenyl ethyl alcohol, geraniol and citronellol by spectrometry (UV, IR, $^1$H-NMR, $^{13}$ C-NMR) and enzymatic hydrolysis with $\beta$ - glucosidase. Monoterpene alcohols with a sterically hindered hydroxyl group, such as linalool, $\ell$-menthol and $\alpha$-terpineol were not used as acceptors in transglycosylation reaction.

• 한국화재소방학회논문지
• /
• 제17권1호
• /
• pp.26-32
• /
• 2003

Halon대체 소화제로 쓰이는 불활성 기체 중 Ar, $N_2$, $CO_2$의 단일 성분일 때의 물성(포화압력, 밀도, 점도)에 관한 실험식을 구하였다. 문헌에서 얻은 실험 값을 이용하여 다항식 등의 회귀분석에 의해서 실험식을 얻었다. 포화압력은 온도에 대하여 각각 2차와 3차의 실험식으로 표시하였다. 밀도는 Ar, $N_2$는 온도에 대한 1차 함수로 표시하였고, $CO_2$는 온도에 대하여 각각 2차와 3차의 실험식으로 표시하였다. 점도는 온도에 대한 지수함수로 표시하였다. 이들 실험식을 이용하여 단일 성분일 때의 상태를 알 수 있다.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.267-272
• /
• 2002

The production of micro components is one of the leading technologies in the fields of information and communiation, medical and biotechnology, and micro sensor and micro actuator system. Microfabrication (micromachining) techniques such as X-ray lithography, electroforming, micromolding and excimer laser ablation are used for the production of micro components out of silicon, polymer and a limited number of pure metals or binary alloys. However, since the first development of microfabrication technologies there have been demands for the cost-effective replication in large scale series as well as the extended range of available material. One such promising process is micro powder injection molding (PIM), which inherits the advantages of the conventional PIM technology, such as low production cost, shape complexity, applicability to many materials, applicability to many materials, and good tolerance. This paper reports on a fundamental investigation of the application of W-Cu powder to micro metal injection molding (MIM), especially in view of achieving a good filling and a safe removal of a micro mold conducted in the experiment. It is absolutely legitimate and meaningful, at the present state of the technique, to continue developing the micro MIM towards production processes for micro components.

• 설비공학논문집
• /
• 제8권3호
• /
• pp.338-350
• /
• 1996

A numerical analysis is carried out to study the two-dimensional steady state natural convection from vertical wires immersed in cold pure water. The surface of the wire is $0^{\circ}C$ unifrom temperature. Results of the analysis are presented for free stream temperature from $0^{\circ}C$ to $25^{\circ}C$ and the aspect ratio N from $5.26{\times}10^{-3}$ to $1.0{\times}10^{-3}$. The effects of the density extremum and aspect ratio on the flow pattern and the heat transfer characteristics are discussed As the aspect ratio N becomes larger, in the range of $1.0^{\circ}C{\leq}T_{\infty}{\leq}4.4^{\circ}C$ and $6{^{\circ}C}{\leq}T_{\infty}{\leq}17^{\circ}C$, the effect of Pr number on the heat transfer is shown to be more significant than the aspect ratio. Investigating into the effect of the density extremum on the heat transfer from wires, the new heat transfer correlations are suggested with the relation of average Nu mumber vs. modified Ra number. Here, the coefficient values C of correlations are presented as the function of density extremum parameter $R^*$. The effects of the density extremum parameter are also discussed.

• 한국전기전자재료학회논문지
• /
• 제28권4호
• /
• pp.229-233
• /
• 2015

In this paper, in order to develop outstanding Pb-free piezoelectric composition ceramics, the $(Na_{0.525}K_{0.443}Li_{0.037})(Nb_{0.883}Sb_{0.08}Ta_{0.037})O_3+0.3wt%Bi_2O_3+0.4wt%Fe_2O_3+xwt%CuO$ (x= 0~0.8 wt%)(abbreviated as NKL-NST) lead-free piezoelectric ceramics have been synthesized using the ordinary solid state reaction method. The effects of CuO-doping on the structure and electrical properties of the NKL-NST ceramics were systematically studied. The results show that the ceramics exhibit a pure perovskite structure with orthorhombic phase at room temperature, and secondary phase was found in the ceramics. The 0.4 wt%CuO added ceramics sintered at $950^{\circ}C$ showed the optimum properties of piezoelectric constant($d_{33}$), planar piezoelectric coupling coefficient(kp) and mechanical quality factor(Qm) : $d_{33}=213$[pC/N], kp= 0.43, Qm= 423,respectively.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권1호
• /
• pp.6-8
• /
• 2014

The influence of quenching temperature, heating atmosphere and annealing time on superconducting characteristics has been studied for $LuBa_2Cu_3O_{7-z}$ compound which has been recently synthesized in a nearly phase-pure form. Resistivity measurements for the as-prepared sample heated at $300^{\circ}C$ in oxygen and subsequently quenched into liquid nitrogen revealed that there is no significant change in $T_c$. On the other hand, $T_c$ of the sample slightly increased when the sample was heated at $300^{\circ}C$ either in air or in $N_2$ atmosphere. It was also found that $T_c$ of the sample decreased when the annealing temperature in $N_2$ atmosphere increased above $400^{\circ}C$. The experimental results indicated that the as-prepared sample is under overdoped state. The enhanced superconducting transition observed in the samples after heating at $300^{\circ}C$ in air or $N_2$ atmosphere was discussed in conjunction with a slight removal of oxygen and ordering of oxygen atoms in the as-prepared sample.