• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.840-843
• /
• 2002

The dry pulverizing/Mixing device is used to deal with the spent fuels for the safe disposal. The separated pellets from hulls by a slitting device are put and oxidized from UO$_2$ solid pellet to U$_3$O$\_$8/ powder in the device. The device have been developed based on a voloxidation method which is one of several dry de-cladding methods. We have benchmarked dry de-cladding methods, analyzed applicability to the advanced spent fuel management process, integrated and compared several configuration, and finally derived detailed specifications proper to requirements for the device. Also, thermal characteristics of the device such as thermal stress and strain have been analyzed by the commercial software, 1-DEAS, and the reliability of the results have been verified by the KOLAS(Korea Laboratory Accreditation Scheme). The UO$_2$ solid pellets are put in the device which has a capacity of 20 kgHM per a batch, heated up about 600$^{\circ}C$ in the air environment. Then, the UO$_2$ solid pellets are oxidized into the U$_3$O$\_$8/ powder, and the powder is collected in a special vessel. The device has been designed and developed as fellows: the multi-staged fine hole meshes are used to reduce the size of the powder gradually, heat and air(oxygen) are supplied continuously to reduce the reaction time, and slight vibration effect are applied to collect powder cling to the device.

• 한국식품영양과학회지
• /
• 제40권6호
• /
• pp.790-797
• /
• 2011

대표적인 잡곡인 조, 기장, 수수에 대하여 핀밀을 이용한 분쇄와 저온초미분쇄기를 이용한 방법으로 제분하여 이들에 대한 항산화성분 및 항산화활성을 분석한 결과 핀밀로 분쇄한 경우 평균 입자직경은 각각 102.12, 89.52 및 $102.25\;{\mu}m$로 나타났으며, 저온초미분쇄는 각각 9.43, 9.52 및 $10.18\;{\mu}m$로 핀밀에 비해 10배 이상 작은 것으로 나타났다. 수분함량은 분쇄방법에 따라 큰 차이를 보이지 않았고 조지방 함량은 저온초미분쇄가 높은 함량을 보였으며, 식이섬유 함량은 저온초미분쇄보다 핀밀분쇄 시료에서 높은 함량을 보이는 것으로 나타났다. 총 ${\gamma}$-oryzanol 함량은 조에서 핀밀 및 저온초미분쇄 시료에서 각각 116.07 및 $145.30\;{\mu}g$/g으로 나타났으며, 추출수율은 저온초미분쇄 시료가 핀밀 분쇄시료에 비해 유의적으로 높은 것으로 나타났다. 메탄올 추출물에 대한 총 폴리페놀, 플라보노이드 및 탄닌 함량은 대체적으로 분쇄방법에 따라 유의적인 차이를 보이지 않았으나 수수 총 폴리페놀 함량은 각각 14.58 및 15.03 mg/g ER로 유의적인 차이를 보였다. Phenolic compound를 정량 분석한 결과 조는 pyrogallol, gallic acid, (+)-catechin, salicylic acid, ferulic acid, rutin 등이, 기장은 pyrogallol, rutin, gallic acid, kaempfrol, salicylic acid 등이, 수수는 (+)-catechin, salicylic acid, pyrogallol, myricetin, hesperidin, chlorogenic acid 등이 높은 함량을 나타내었다. 수수 메탄올 추출물의 radical 소거활성이 높은 것으로 나타났으며, 저온초미분쇄시료 추출물이 각각 178.10 및 251.56 mg TE/g ER로 핀밀분쇄 시료 추출물보다 유의적으로 높은 활성을 보이는 것으로 나타났다. 분쇄방법에 따른 시료의 메탄올 추출물의 항산화성분 및 활성을 검정한 결과 항산화성분은 대체적으로 핀밀분쇄 시료에 비해 저온초미분쇄 시료에서 약간 높은 함량으로 보였으나 큰 차이를 보이지 않았고 항산화활성은 수수와 기장에서 저온초미분쇄 시료 추출물이 핀밀분쇄 시료에 비해 유의적으로 높은 활성을 나타내었다.

• Journal of Biosystems Engineering
• /
• 제37권3호
• /
• pp.140-147
• /
• 2012

Purpose: This study was conducted to understand the work performance of crank-type rotavators and compare them with those of rotary-type rotavators in Korean farmland conditions. Methods: Tillage operations were carried out using both rotavators with the same nominal rotavating width and rated power. During the operations, PTO speed and torque, actual work speed, and rotavating width and depth were measured. To evaluate work performance, pulverizing ratio, inversion ratio, and specific volumetric tilled soil were calculated and compared for each rotavator. Results: It is found that the crank-type rotavator has better specific volumetric tilled soil performance and deep tillage, while the pulverizing ratio is worse. Conclusions: Crank-type and rotary type rotavator have diffenent properties each other in several work performances. It's important, therefore, to choose a suitable type of rotavator that satisfy the farmer's requirements in accordance with the condition of field and the purpose of tillage operation.

• 한국분말재료학회지
• /
• 제2권2호
• /
• pp.135-141
• /
• 1995

As the first step of study on fabrication of ceramic powders from phytoliths in rice, especially in rice husks, pulverization method of rice husks and the properties of milled rice husks were investigated. Impact methods, such as ball milling, were not meaningful for pulverizing elastic and thin fabric structure of rice husks. The most effective one was cutting method. In the present work, a rotating knife cutting method was applied to pulverizing rice husks. A 40-mesh screen was inserted under the rotating knives. The most portion of the milled powder was found in -50/+100 mesh section. Morphology of the milled rice husks revealed that the husks larger than 70 mesh were flake-like shape, at -70/+100 mesh section relatively equi-axed shape, at -170/+325 mesh section rod-like shape, and below 325 mesh section dust-like shape. Tap density of raw rice husks was about 0.1 $g/cm^3$, while those of milled rice husks were over $0.4 g/cm^3$. This meant that, for a given volume of reactor, raw material charge can be increased more that 4 times when using milled rice husks than unmilled one. True densities of unmilled and milled rice husks were higher than $1.4 g/cm^3$, and increased with decreasing milled sizes.

• Journal of Biosystems Engineering
• /
• 제37권5호
• /
• pp.279-286
• /
• 2012

Purpose: This study has been conducted to investigate the applicability of motion analysis of tillage blade for estimation of tillage characteristics of crank-type and rotary-type rotavators. Methods: The interrelation between tillage traces from motion analysis and field test results including rotavating depth, pulverizing ratio and inversion ratio at the same work conditions were analyzed for both crank-type and rotary-type rotavators. The work conditions include working speed of prime mover tractor and PTO speed of rotavators. For the motion analysis, joint conditions of main connecting component were specified considering the actual working mechanism of rotavator. Results: There were important correlations for the trend between motion analysis and field test results. Conclusions: Although further study is needed for applying motion analysis to estimate the accurate tillage related parameters such as rotavating depth, the soil pulverizing ratio and inversion ratio, it could be used to compare the tillage characteristics of various rotavators quickly and simply.

• Journal of Animal Science and Technology
• /
• 제62권6호
• /
• pp.884-892
• /
• 2020

Corticosterone is known as a biological stress index in many species including birds. Feather corticosterone concentration (FCC) has increasingly been used as a measure for chronic stress status in broiler chickens. As sample preparation is the first step of analytical process, different techniques of feather matrix disruption need to be validated for obtaining better result in analysing corticosterone extraction. The current study was a validation of pulverizing the feather by bead beater (BB) and surgical scissors (SS) processing prior to corticosterone extraction in feather of broiler chickens. The type of feather processing prior to the hormone extraction may alter the final output. Thereby, finding a standard method according to laboratory facilities is pivotal. This study carried out to determine the effects of feather pulverization methods on the extraction amount of corticosterone in broiler chickens. Feathers were sampled from four weeks old Ross 308 broiler chickens (n = 12 birds). All broiler chickens were kept under the same environmental condition and had access to feed and water. Feather samples were assigned to one of the following processing methods 1) using a BB for pulverizing and 2) using a SS for chopping into tiny pieces. Each sample was duplicated into two wells during enzyme immunoassay (EIA) analysis to improve the accuracy of the obtained data. The results showed lower standard errors and constant output of FCC by using the BB method compared with the SS method. Overall comparison of FCC showed a significantly higher (p < 0.001) amount of the FCC in the BB compared with the SS. Overall, using the BB method is recommended over the SS method for feather processing due to the ability to homogenize a large number of samples simultaneously, ease of use and greater extraction of feather corticosterone.

• Journal of Biosystems Engineering
• /
• 제38권2호
• /
• pp.73-80
• /
• 2013

Purpose: This study was conducted to compare tillage and loads characteristics of three types of rotavators in farmland working condition of Korea. Methods: Tillage operations using three types of rotavators, i.e. rotary-type, crank-type and plow-type, were carried out in a dry field of Korea. The same prime mover tractor was used for driving three types of rotavators, and under several operational conditions, tillage characteristics such as actual working speed, rotavating depth, rotavating width, actual field capacity, flow of tilled soil, soil inversion ratio, and pulverizing ratio were measured. In addition, loads characteristics like torque and required power of Power Take-Off (PTO) shaft were calculated. Results: The average rotavating depth was smaller than the nominal value for all rotavators, and the difference was the greatest in the plow-type rotavator. Nevertheless, the plow-type rotavator showed the largest rotavating depth. The rotavating width was the same as the nominal value of all rotavators. The flow of tilled soil at the same operational conditions was the greatest in the plow-type rotavator and was the smallest in the rotary-type rotavator. In the most commonly used gear conditions of L2 and L3, the average soil pulverizing ratio was the greatest in the rotary-type rotavator, and followed by crank-type and plow-type rotavators in order. In the gear L2 and L3, the plow-type rotavator also had the lowest average soil inversion ratio while the rotary-type and crank-type rotavators had the same soil inversion ratio each other. The average torque and power of PTO shaft in the gear L2 and L3 were the highest in the plow-type rotavator. The load spectra of PTO shaft applying rain flow counting method and Smith-Waston-Topper equation to the measured torque showed that the modified torque amplitude was the greatest in the crank-type rotavator. This may come from the large torque fluctuation of crank-type rotavator during tillage operations. Conclusions: The three types of rotavators had different tillage and loads characteristics. The plow-type rotavator had the deepest rotavating depth, the smallest soil inversion ratio, the largest soil pulverizing ratio and required PTO power. Also, the crank-type rotavator showed a large torque fluctuation because of their unique operational mechanism. This study will help the farmers choose a suitable type of rotavator for effective tillage operations.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.109-110
• /
• 2021

An attempt has been made on a constructive approach to evaluate the performance of snail shell ash (SSA) for its corrosion performance under marine environments. Corrosion performance of steel rebar in chloride contaminated SSA with (0% to 50%) replacement levels of cement extract medium was examined through electrochemical and weight loss techniques. Initially, snail shell powder (SSP) is made by pulverizing and subsequently SSA is by thermal decomposition methods. A critical level of 20 % SSA improved both corrosion resistance properties of cement extracts. SSA is a suitable replacement material for natural limestone in cement productions.

• 한국작물학회지
• /
• 제57권4호
• /
• pp.353-358
• /
• 2012

본 연구에서는 검정찰옥수수 종실을 일반분쇄와 저온미세분쇄를 하여 입자크기에 따른 항산화 활성과 cytotoxicity를 평가하여 이용성 증진을 하고자 연구를 수행하였다. 본 연구의 결과를 요약하면 다음과 같다. 1. 분쇄 정도에 따른 평균값은 일반분쇄가 $473.7{\mu}m$, 저온미세분쇄 $17.2{\mu}m$이었으며 중간값은 $336.9{\mu}m$와 $13.4{\mu}m$를 나타내었다. 2. TEAC 활성 측정 결과 일반분쇄는 $3.87{\mu}mol$ TE/g로서 저온미세분쇄 $5.15{\mu}mol$ TE/g보다 낮은 활성을 보였다. FRAP 활성 측정에서는 저온미세분쇄가 $10.08{\mu}mol$ Fe(II)/g로 일반분쇄 $8.86{\mu}mol$ Fe(II)/g보다 높은 활성을 보였다 3. 간암 세포주(Hep-G2) 성장억제에 미치는 영향은 1 mg/ml 농도에서 검정찰옥수수 종실을 일반분쇄(31.48%)한 것보다 저온미세분쇄(27.41%)를 한 경우가 암세포 생장 억제 효과를 큰 것으로 나타났다. 4. 대장암 세포주인 HCT-116에서는 1 mg/ml에서 분쇄정도에 따라 큰 차이를 보이지 않았으며, 유방암 세포주(MCF-7)에서는 일반분쇄가 미세분쇄보다 높은 생장억제를 보였다.

• Journal of Ginseng Research
• /
• 제26권2호
• /
• pp.79-84
• /
• 2002

홍삼 분쇄의 신 가공 기술로서 비충격(非衝擊)분쇄방식인 cell cracker의 공장 적용 가능성을 제시하고 홍삼분말의 품질고급화에 기초자료로 활용하고자 기존의 hammer mill(충격분쇄방식)과 cell cracker에 의한 분쇄방식으로 홍삼분말을 제조한 후 색도, 밀도 및 관능적 특성을 비교 조사한 결과를 요약하면 홍삼분말의 색도는 cell cracker로 분쇄한 홍삼분말의 경우 색의 밝기를 나타내는 L값은 68.15로 hammer mill로 분쇄한 홍삼분말 72.08 보다 낮았으나 a(적색도) 와 b(황색도)값은 각각 4.21과 5.73, 26.56과 28.36으로 높게 나타났다. 물 추출물의 색도는 시간이 경과함에 따라 두 가지 시료 모두 흡광도가 증가하였으며 전반적으로 hammer mill로 분쇄한 홍삼분말이 cell cracker로 분쇄한 홍삼분말 보다 흡광도가 높게 나타났다. 밀도는 분말의 유동성 특성을 나타내는 이완겉보기밀도, 충격겉보기밀도, 체적감소율은 hammer mill로 분쇄한 홍삼분말보다 cell cracker로 분쇄한 홍삼분말이 모두 높게 나타났다. 미Rm럼각은 쌓임각 보다 낮았으며 이 두 가지 모두 hammer mill로 분쇄한 홍삼분말 보다 cell cracker로 분쇄한 홍삼분말이 낮게 나타났다. 관능검사결과 촉감에 있어서는 두 시료간에 유의 차가 없는 것으로 나타났지만, 홍삼분말 제품의 품질 특성에 큰 영향을 미치는 색도는 cell cracker가 좋게 평가되었으며, 전체적인 선호도에 있어서도 좋게 나타났다. 이상의 연구결과를 종합해볼 때 홍삼분말의 품질 특성에 미치는 요소로서 분쇄방법이 중요한 인자로 작용하고 있음을 알 수 있었으며 홍삼분말의 제조에는 분쇄기 선정이 무엇보다 중요하며 특히 색깔 등 관능적 품질이 강조되는 홍삼분말 제품을 제조할 경우는 기존 충격식 분쇄보다 비충격식 분쇄시스템을 적용하는 것이 품질향상 효과가 클 것으로 생각된다.