• ETRI Journal
• /
• 제35권5호
• /
• pp.927-930
• /
• 2013

We propose a visible light communication system in which the color and brightness are controllable. Pulse width modulation and variable pulse position modulation (VPPM) schemes are used to control the color and brightness, respectively. A digital algorithm to decode VPPM signals is suggested and implemented. A seamless transmission is observed in a testbed experiment under various environmental conditions. The proposed scheme can be applied to emotional-lighting-based wireless optical communication.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권4호
• /
• pp.493-500
• /
• 2015

A flyback converter operates with either pulse width modulation (PWM) or pulse frequency modulation (PFM) control scheme depending on the load current. At light load condition, PFM control is employed to reduce the switching frequency and thereby minimize the switching power loss. For heavier load, PWM control is used to regulate the output voltage of the flyback converter. The flyback controller has been implemented in a $0.35{\mu}m$ BCDMOS process and applied to a 40-W flyback converter. The light-load power efficiency of the flyback converter is improved up to 5.7-% comparing with the one operating with a fixed switching frequency.

• 한국지능시스템학회논문지
• /
• 제15권1호
• /
• pp.92-97
• /
• 2005

본 논문은 비선형 제어 시스템을 효과적으로 모사하는 TS(Takaki-Sugeno: TS) 퍼지 시스템의 펄스폭 변조 (Pulse-Width Modulated: PWM) 제환 제어기 설계 기법을 논의한다. 효율적이며 신뢰할만한 퍼지 PWM 제어기를 설계하기 위하여 전역적 지능형 디지털 재설계 기법(global intelligent digital redesign)을 이용한다. 우선 잘 설계된 아날로그 퍼지 제어기를 설계한 후 전역적 지능형 디지털 재설계 기법을 이용하여 디지털 퍼지 제어기를 설계한다. 유사한 전역적 상태정합 개념을 이용하여 재설계된 디지털 퍼지 제어기론 퍼지 PWM 제어기로 변환한다. 또한 재설계된 퍼지 PWM 제어기의 안정화 가능성을 조사한다.

• 전자공학회논문지SC
• /
• 제38권1호
• /
• pp.53-60
• /
• 2001

전력전자의 많은 응용분야에서 고주파 공진형 인버터가 이용되며, 이들 공진형 인버터의 출력 전력을 제어하기 위하여는 PAM(Pulse Amplitude Modulation), PFM(Pulse Frequency Modulation) 혹은 PWM(Pulse Width Modulation) 기법들이 이용된다. 그리고 이들 공진형 인버터는 변화하는 부하 상태에서도 신뢰성 있게 동작하기 위하여 출력추파수를 제어하여야 한다. 본 논문에서는 공진형 인버터의 PWM 제어의 일환으로써 새로운 스위칭 방법을 제안하였다. 제안한 방법에 의하면, 변화하는 공진 주파수하에서도 최적의 공진 주파수와 출력 기본파 역률 1을 달성할 수 있다. 제안한 PWM 스위칭 방법의 상세한 알고리즘 및 출력특성을 기술하였다. 그리고 실험 결과를 통하여 제안한 방법의 타당성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.285-288
• /
• 1996

The electronic operation of the gas discharge tube is controlled by the electrical energy as sinusoidal waveform in arbitrary frequency range, or as a sequence of pulses at a wide range of duty cycle, the gas composition, the kind of electrode and the vessel geometry. In this paper, the pulsed mode operated gas discharge tube is composed with mixed gas of IIg-Ne ( 10 Torr ), in the tube of 15.0 mm outer diameter and has variable color from red to blue with changing frequency and pulse width in high voltage. As increasing pulse width and frequency in the gas discharge tube, the phenomenons that the electron temperature in the positive column increases and the radiation from atoms of higher upper state energy levels increases, exist. The color have the locus from red (0.4972, 0.3128) to blue (0.2736, 0.2619) in CIE chromacity diagram with increasing pulse width and frequency. The changing method of pulse width and frequency has been shown to be suitable for the luminous color control.

• 조명전기설비학회논문지
• /
• 제12권1호
• /
• pp.45-50
• /
• 1998

최근, 유도전동기 회전속도 제어용 구동 전원으로 인버터와 싸이크로컨버터가 널리 사용되고 있다. 싸이크로컨버터에 의한 전동기 구동은 일정 주파수의 교류전원에서 직접 주파수가 다른 교류로 변환함으로 하드웨어 구성이 인버터 보다 간단하다. 본 연구의 목적은 싸이크로컨버터에 의한 유도전동기 벡터제어 시스템의 제어방법 및 하드웨어 설계를 행하는 것이다. 본 연구에서는 교류 전동기 슬립 주파수형 벡터제어 알고리즘을 도출하고 이 원리에 기초하여 싸이크로컨버터를 이용한 벡터제어 시스템을 구성하였다. 싸이크로컨버터는 1차 입력전류 진폭 $li_1l$ 과 각주파수 $\omega_1$을 지령값으로 진폭변조 제어신호를 발생하여 SCR의 게이터를 트리거한다. 본 벡터제어 시스템은 교류 전동기를 구동한 결과 자속이 일정하게 유지되면서 정회전에서 역회전까지 연속적으로 양호한 운전을 할 수 있었다.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.98-103
• /
• 2012

This paper presents a digital pulse width modulator (DPWM) with a reduced digital modulation delay (a transport delay of the modulator) during the transient response of power converters. During the transient response operation of a power converter, as a result of dynamic variations such as load step-up or step-down, the closed loop controller will continuously adjust the duty cycle in order to regulate the output voltage. The larger the modulation delays, the larger the undesired output voltage deviation from the reference point. The three conventional DPWM techniques exhibit significant leading-edge and/or trailing-edge modulation delays. The DPWM technique proposed in this paper, which results in modulation delay reductions, is discussed, experimentally tested and compared with conventional modulation techniques.

• International Journal of Control, Automation, and Systems
• /
• 제6권5호
• /
• pp.660-669
• /
• 2008

This paper presents a new carrier based pulse-width modulation (PWM) method for matrix converters. By using the concept of average over one switching period, the modulation algorithm and the required equations are derived to synthesize the desired output voltage and to achieve the controlled input power factor. The proposed method uses a continuous carrier and the predetermined duty ratio signals to directly generate the gating signals and, thus, is referred to as "direct duty ratio PWM (DDPWM)". The feasibility and validity of the proposed method were verified by simulation and experiment.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.670-674
• /
• 2016

The control performance of hybrid PWM inverter using a phase current measurement is presented in this paper. The hybrid PWM technique consists of space vector pulse width modulation (SVPWM) and six-step voltage control operation. The SVPWM is performed to reduce the harmonic components in the low speed region, and the six-step modulation is applied to increase the maximum speed of the IPMSM in the high speed region. Therefore, it is possible to obtain a great performance in both the low speed range and high speed range. However, the six-step modulation cannot be completely implemented, since the inverter that includes the lag-shunt sensing method has an immeasurable current region. In this paper, a quasi-six-step modulation using a modified voltage vector is proposed. The validity and usefulness of the proposed PWM technique is verified by MATLAB/Simulink and experimental results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집
• /
• pp.31-35
• /
• 2004

We propose driving method of Ultraviolet sensor for fire alarms using pulse width modulation that used to fire detector with sensor of private-use detectable light energy as ultraviolet in energy of electromagnetic-wave type radiate from flame, when combustible burn with contain carbon,. Ultraviolet sensor is UV Tron using gas multiplication effect to current discharge and photoelectric effect of metal. To have high sensibility and to gain proper output voltage, it has high responsive performance. This research designed driving circuit with UV sensors and proposed method of false alarm reduced to resemble fire. the result propers the prevention and extinction of fire technique degree, certificated operation of detector.