• The Journal of Korean Medicine
• /
• v.35 no.3
• /
• pp.155-165
• /
• 2014

Objectives: The pulse diagnosis to identify the symptoms has been considered important in Korean medicine. The position and character of disease would be confirmed by pulse diagnosis of left and right radial artery. This paper is to analyze the characteristics and differences of left and right blood vessels. Methods: In this study, left and right radial artery and dorsalis pedis artery was measured and analyzed by using condenser typed pulse analyzer. Commercially available pulse analyzer was used to measure the radial artery. The pulse wave was measured in 20 laboratory healthy men and women. The blood vessel aging degree and index of augmentation of blood vessel was obtained from the measured pulse wave graph and the characteristics and differences of the left and right blood vessel was analyzed. Results: The significant difference of pulse transit time between the right handed and non-right handed was not found. The correlation of radial artery and dorsalis pedis artery had no significant difference. By obtaining the blood vessel aging index (AGI) and augmentation index (AI) of blood vessel at the left and right radial artery, the significant difference between right handed and non-right handed was not found. Conclusions: The result of this study would help to explain the characteristic of blood vessel with respect to the left and right handed. We suggest that research of pulse wave of the left and right blood vessel using pulse analyzer should be needed in further study.

• Structural Engineering and Mechanics
• /
• v.65 no.5
• /
• pp.601-609
• /
• 2018

Steel bolts are used in the construction industry for a large variety of applications that range from fixing permanent installations to temporary fixtures. In the past much research has been focused on developing destructive testing techniques to estimate their pull-out load carrying capacity with very little attention to develop non-destructive techniques. In this regards the presented research work details the combined use of ultrasonic pulse velocity and Schmidt hammer tests to identify anchor bolts with faculty installation and to estimate their pull-out strength by relating it to the Schmidt hammer rebound value. From experimentation, it was observed that the load capacity of bolt depends on its embedment length, diameter, bond quality/concrete strength and alignment. Ultrasonic pulse velocity test is used to judge the quality of bond of embedded anchor bolt by relating the increase in ultrasonic pulse transit time to the presence of internal pours and cracks in the vicinity of steel bolt and the surrounding concrete. This information combined with the Schmidt hammer rebound number, R, can be used to accurately identify defective bolts which resulted in lower pull-out strength. 12 mm diameter bolts with embedment length of 70 mm and 50 mm were investigated using constant strength concrete. Pull-out load capacity versus the Schmidt hammer rebound number for each embedment length is presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.655-656
• /
• 2008

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.514-516
• /
• 2021

본 연구는 심혈관계 질환 진단에 주고 사용되는 PTT 를 계산할 때 필요한 PPG 신호가 없을 경우 ECG 신호만을 사용하여 PTT 값을 예측하는 방법을 제안한다. MIMIC-I 데이터셋에서 2 채널 심전도 데이터와 광전용적맥파 데이터를 확보하여 제안하는 방법을 적용하였을 때, RMSE 0.07116 으로 예측하였다. 본 연구는 향후 단일 생체신호만 측정할 수 있는 제한된 상황에서 대안으로 활용될 수 있을 것이다.

• Science of Emotion and Sensibility
• /
• v.11 no.2
• /
• pp.235-244
• /
• 2008

This study is to develop automatic extraction system of continuous blood pressure using ECG (Electrocardiogram) and PPG(Photoplethysmography) for u-health care technology. PTT (Pulse Transit Time) was determined from peak difference between ECG and PPG and its inverse made to get blood pressure. Since the peaks were vulnerable to be contaminated from noise and variation of amplitude, this study developed the adaptive algorithm for peak calculation in any noise condition. The developed method of the adaptive peak calculation was proven to make the standard deviations of PPT decrease to 28% and the detection of noise increase to 18%. Also, the correlation model such as blood pressure = -0.044 $\cdot$ PTT + 133.592 has successfully been determined for predicting the continuous pressure measured without using cuff but with using PPG and ECG, only.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.5
• /
• pp.363-368
• /
• 1999

Ultrasonic pulse-echo methods measuring the transit time through specimens have been widely used in determination of ultrasonic velocity and thickness of specimens. Usually, to determine the velocity of the ultrasonic. the transit time of the ultrasonic pulse through specimen is measured by using the ultrasonic measuring equipment such as the oscilloscope including ultrasonic pulser/receiver and the thickness of the specimen is measured by using the length measuring instrument such as micrometer or vernier calipers etc., i. e. each parameter is measured by using each measuring method. In the case of the measuring the thickness of a specimen by using the ultrasonics. the ultrasonic equipments, which measure the thickness, such as the ultrasonic thickness gauge must be calibrated by using the reference block of which the ultrasonic velocity is known beforehand. In the present work, we proposed a new method for simultaneous measurement of ultrasonic velocity and thickness without reference blocks. Experimental results for several specimens show that proposed method have good agreements with those by traditional ultrasonic method.

• Journal of Sensor Science and Technology
• /
• v.21 no.2
• /
• pp.135-143
• /
• 2012

Arterial stiffness is causing the serious problems for human who is suffered from hypertension and metabolic syndrome. So it is important that measure the arterial stiffness for early prevention. Many researches point out that pulse wave velocity(PWV) is the reliable and simple method to predict arterial stiffness. In this paper, we developed the sensing parts that detect the pulse wave and ECG by using piezoelectric film and conductive textile with elastic band. Our system could detect 3ch pulse wave and ECG. Simultaneously, our algorithm extracts the features for calculating the delays among pulse waves. The delays are the significant parameter to estimate PWV, thus we design the experiment for evaluating the performance of our sensing parts. The reference is PP-1000(HanByul Meditech, Korea) that is good for performance evaluation. As a result, the start point of the pulse wave was the most reliable feature for comparing with PP-1000(r=0.691, P=0.00). The results between two operators showed that there is only a slight difference in the reproducibility of the devices. In conclusion, we assume that the suggested sensor could be more comfortable and faithful method for arterial stiffness.

• Journal of Life Science
• /
• v.17 no.2 s.82
• /
• pp.218-222
• /
• 2007

The purpose of this study is to evaluate the relationship between high sensitive C-reactive protein (hsCRP) and pulse transit time (PPT). Apparently healthy 233 subjects had been enrolled in the health promotion center of the Pusan National University Hospital from Jan. 29 to Feb. 26, 2004. They had no previous history of diabetes, hypertension and hyperlipidemia. Subjects were categorized according to tertiles of hsCRP level [Group 1: first tertile $(0.01\;{\sim}\;0.02\;mg/dl)$, Group 2: second tertile $(0.03\;{\sim}\;0.05\;mg/dl)$, Group 3: third tertile $(0.06\;{\sim}\;0.12\;mg/dl)$, and Group 4: Fourth tertile $(0.13\;{\sim}\;16.8\;mg/dl)$]. PTT body mass index (BMI), total cholesterol (T-C), LDL-cholesterol(LDL-C), blood sugar (BS), systolic blood pressure (sBP) and diastolic blood pressure (dBP) were significantly different among hsCRP groups (p<0.05). HsCRP is positively related with BMI, tryglyceride (TG), LDL, sBP and dBP (p<0.05), and negatively related with PTT and HDL-cholesterol (HDL-C) (p<0.05). PTT is significantly negatively related with hsCRP, T-C, TG, LDL-C, BS, dBP and sBP (p<0.05). The hsCRP and PTT were related before controlling BMI, T-C, LDL-C, sBP, and dBP, but not related after conkolling. The relationship between hsCRP and PTT depends on cardiovascular disease risk factors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.103-115
• /
• 2012

In this paper, design and performance evaluation of Tapered Slot Antenna for IR-UWB which propagates impulse radio is performed. TSA which has directional characteristic in UWB band should have low radiation loss and minimized impulse radiation distortion. In order to achieve these objectives, the paper designed wide band Impedance transformer and microstrip-slotline transit region structured TSA feeder line. By using the fabricated TSA, the radiation pattern was measured in the radio anechoic chamber. Pulse fidelity and distortion equation was induced to evaluate time domain characteristics according to the impulse radiation. Pulse fidelity of Impulse radiation show favorable results more than 93% within ${\pm}30^{\circ}$ beam width.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2919-2922
• /
• 2003

In this paper, we present a new methodology to analyze the characteristics of artery by using 4 channels photophethysmography. The proposed parameter is a time difference of pulse transit time (PTT) between pulse waves at finger site and at toe site. As the results of experiments, the change of parameter was found according to ages. The result of regression analysis about relationships between the parameter and ages for n=51, the coefficient of correlation of non-normalized data has -0.79770 in left side and -0.80599 in right side and the coefficient of correlation of normalized data by height has -0.81345 in left side and -0.81605 in right side.