1 |
Mandal, T., Tinjum, J.M. and Edil, T.B. (2016), "Non-destructive testing of cementitiously stabilized materials using ultrasonic pulse velocity test", Transp. Geotech., 6, 97-107.
DOI
|
2 |
Philipp, M., Eligehausen, R., Hutchinson, T.C. and Matthew, S.H. (2016), "Behavior of post-installed anchors tested by stepwise increasing cyclic load protocols", ACI Struct. J., 113(5), 997-1008.
|
3 |
Qasrawi, H.Y. and Marie, I.A. (2013), "The use of USPV to anticipate failure in concrete under compression", Cement Concrete Res., 33(12), 2017-2021.
DOI
|
4 |
RILEM Recommendation NDT 1 (1972), Testing of Concrete by the Ultrasonic Pulse Method, RILEM Publications, Paris, France.
|
5 |
Saleem, M. (2017), "Study to detect bond degradation in reinforced concrete beams using ultrasonic pulse velocity test method", Struct. Eng. Mech., 64(4), 427-436.
DOI
|
6 |
Saleem, M., Al-Kutti, W., Al-Akhras, N. and Haider, H. (2016), "Non-destructive testing method to evaluate the load carrying capacity of concrete anchors", J. Constr. Eng. Manage., 142(5), 17-29.
|
7 |
Saleem, M. and Nasir, M. (2016), "Bond evaluation of concrete bolts subjected to impact loading", J. Mater. Struct., 49(9), 3635-3646.
DOI
|
8 |
Saleem, M. (2014), "Cyclic pull-out push-in shear-lag model for post-installed anchor-infill assembly", Arab. J. Sci. Eng., 39(12), 8537-8547.
DOI
|
9 |
Saleem, M. and Tsubaki, T. (2010), "Multi-layer model for pullout behavior of post-installed anchor", Proceedings of the FRAMCOS-7, Fracture Mechanics of Concrete Structures, AEDIFICATIO, Germany.
|
10 |
Tarun, R.N., Malhotra, M.V. and Popovics, S.J. (2004), The Ultrasonic Pulse Velocity Method, CRC Press LLC, London, U.K.
|
11 |
Torabi, S.R., Ataei, M. and Javanshir, M. (2010), "Application of Schmidt rebound number for estimating rock strength under specific geological conditions", J. Min. Environ., 1(2), 1-8.
|
12 |
Umais, K., Al-Osta, M.A. and Ibrahim, A. (2017), "Modeling shear behavior of reinforced concrete beams strengthened with externally bonded CFRP sheets", Struct. Eng. Mech., 61(1), 125-142.
DOI
|
13 |
Brozovsky, J. and Zach, J. (2011), "Influence of surface preparation method on the concrete rebound number obtained from impact hammer test, Proceedings of the 5th Pan American Conference for Non-Destructive Testing, Cancun, Mexico.
|
14 |
Chen, Z., Xu, J., Ying, L. and Su, Y. (2014), "Bond behaviors of shape steel embedded in recycled aggregate concrete and recycled aggregate concrete filled in steel tubes", Struct. Eng. Mech., 17(6), 347-360.
|
15 |
ASTM Test Designation C 597-02 (2003), Standard Test Method for Pulse Velocity through Concrete, Annual Book of ASTM Standards, West Conshohocken, PA, U.S.A.
|
16 |
BS 1881, Part 203 (1986), Recommendations for Measurement of Velocity of Ultrasonic Pulses in Concrete, British Standards Institution, London, U.K.
|
17 |
Cargill, J.S. and Shakoor, A. (1990). "Evaluation of empirical methods for measuring the uniaxial compressive strength of rock", J. Rock Mech. Min. Sci. Geomech., 27, 495-503.
DOI
|
18 |
Guillet, T. (2011), "Behavior of metal anchors under combined tension and shear cycling loads", ACI Struct. J., 108(3), 315-323.
|
19 |
Hoehler, M.S. and Eligehausen, R. (2008), "Behavior and testing of anchors in simulated seismic cracks", ACI Struct. J., 105(3), 348-357.
|
20 |
Hoehler, M.S. and Eligehausen, R. (2008), "Behavior of anchors in cracked concrete under tension cycling at near-ultimate loads", ACI Struct. J., 105(5), 601-608.
|
21 |
Li, J., Gao, X. and Zhang, P. (2007), "Experimental Investigation on the bond of reinforcing bars in high performance concrete under cyclic loading", Mater. Struct., 40(3), 1027-1044.
DOI
|
22 |
Liu, J., Sue, M. and Kou, C. (2009), "Estimating the strength of concrete using surface rebound value and design parameters of concrete material", Tamkang J. Sci. Eng., 12(1), 1-7.
|
23 |
Mutlib, N.K., Baharom, S.B., El-Shafie, A. and Nuawi, M.Z. (2016), "Ultrasonic health monitoring in structural engineering: Buildings and bridges", Struct. Contr. Health Monitor., 23, 409-422.
DOI
|
24 |
Katalin, S. (2013), "Rebound surface hardness and related properties of concrete", Ph.D. Dissertation, Budapest University of Technology and Economics, Hungary.
|