• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2011년도 전기공동학술대회 논문집
• /
• pp.188-188
• /
• 2011

This paper describes the propagation characteristics of acoustic signals as a function of distance from the location of partial discharge(PD) occurrence to analyze correlation between discharge magnitude and acoustic signal in insulation oil. We fabricated a decoupler and an amplifier to measure acoustic signals produced by PD. The amplifier has the gain of 40 dB and the frequency bandwidth of 1.6 kHz~1.6 MHz. After a comparative calibration by a standard pulse generator and a coupling capacitor, we analyzed the propagation characteristics of acoustic signals in insulation oil as a function of distance.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.332-338
• /
• 1999

Surface hardening of plain carbon steel (SM$%C) by Laser are usually much finer and stronger than those of the base metals. The present study was undertaken to investigate the wear resistance and a processing parameters such as, power density, pulse width, defocusing distance, and molten depth for surface modification of plain carbon steel. The wear test was carried out under experimental condition using the wear test device, and in which the annular surfaces of wear test specimens as well as mating specimen of alumina ceramics(Al2O3) was rubbed in dry sliding condition. It is shown that molten depth and width depend on defocusing distance. The wear loss on variation of sliding speed was much in lower speed range below 0.2m/sec and in higher speed range above 0.7m/sec, but wear loss was little in intermediate speed range. It depends on oxidation speed and wear speed.

• 한국공작기계학회논문집
• /
• 제14권5호
• /
• pp.13-20
• /
• 2005

Micro EDM process is generally used for machining microholes, cavities, and three dimensional shapes. For machining micro structures, first of all, micro tool electrode is indispensable and WEDG system is proposed for tool fabrication method. When using WEDG, its machining characteristics are highly affected by many EDM parameters such as applied voltage, current, rotation speed, capacitance, and pulse duration. Therefore, the design of experiment is introduced to fully understand the effect of the EDM parameters on machining tool electrode. And an attempt has been made to develop the mathematical model for predicting the size of the tool electrode by calculating spark distance. The suggested model was verified with experiment and predicted working gap distance is in good accord with the measured value.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.461-463
• /
• 2000

This paper presents a low temperature excimer-laser-crystallization that produces directionally solidified microstructure in Si thin films. The process involves (1) a complete melting of selected area via irradiation through a patterned mask. and (2) a precisely controlled pulse translation of the sample with respect to the mask over a distance shorter than the superlateral growth(SLG) distance. (3) lateral growth extended over a number of iterative steps. Grains that grow continuously to the vertical direction were demonstrated. We discuss sequential lateral solidification principle, experiment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.167-170
• /
• 2001

A low power pulse Doppler radar should integrate a large number of data to provide a required maximum detectable distance. Doppler filter needs a window that has good out-of-bard rejection level to maintain high dynamic range. From these facts, we can apply decimation and presumming to increase the speed of Doppler processing. This Paper investigates the efficiencies of several decimation methods and the loss of presumming. And I propose a method to increase processing speed but to maintain the maximum detectable distance.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.25-28
• /
• 2001

This paper introduce a millimeter-wave radar system. As Fig 1 shows, This system consists of millimeter-wave radar front-end and digital signal processing parts through receive waves regarding up-coming obstacles. The system works as follow process; (1) Generate regular tripodal waves using the FMCW pulse generator (2) Transmit/Receive waves regarding up-coming obstacles (3) Analog filtering (4) FIFO memory interface (5) FFT(Fast Fourier Transform) (6) Calculation of distance / speed between cars (7) Object display and calibration. We have progress to solve the problem like as increase of traffic accidents causing damage and injuries due to the increased number of motor vehicles and long distance driving, and Need for a device to help drivers who are in trouble due to bad weather conditions. We are expect to Take the lead as a core technology in the ITS industry and to develop circuit and signal processing technologies related to millimeter-wave bandwidth.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.166-176
• /
• 1994

The problem of reducing the vibration level of elastic plates driven by multiple random point forces is analyzed in this study. First, the analytical solution for the vibration level of finite thin plates with four simply supported edges under the action of multiple random point force is derived. By assuming the plates to be lightly damped, an approximate solution for the vibration level of the plate is obtained. A numerical study is carried out to determine an optimal spacing distance between the multiple point forces in order to produce a relative minimum in the plate's vibration level. The optimal spacing distance is shown to depend on the given excitation band. The effects of wave cancellation in the near field of the multiple point forces are discussed by using the equivalence of certain stationary random responses and deterministic pulse responese.

• 한국전자파학회논문지
• /
• 제30권2호
• /
• pp.152-159
• /
• 2019

도플러 레이다는 단일 주파수의 정현파를 이용하므로 움직이는 이동체의 속도만을 측정할 수 있다고 알려져 있다. 일반적으로 이동체의 거리를 측정하기 위해서는 FMCW 레이다나 펄스 레이다를 이용하여야 하는데, 이 경우 하드웨어 구성 및 신호처리가 복잡할 뿐만 아니라, 주파수 대역폭을 넓게 사용하기 때문에 24 GHz나 77 GHz 대역의 밀리미터파를 사용할 수밖에 없어 가격이 비싸다. 따라서 가격이 저렴한 도플러 레이다에서 다중 톤 주파수를 이용하여 이동체의 속도 외에 거리까지 센싱하는 연구가 시작되고 있다. 이에 본 연구에서는 2.4 GHz 도플러 레이다에 내장된 PLL만을 이용한 주파수 조정만으로도 이동체의 거리 센싱이 가능함을 보인다. 특히, 기존에 제안된 DC 기반의 거리 계산에서 필요한 DC 정보를 제거하고, 교류결합된 AC 정보만을 이용하여 거리를 센싱할 수 있음을 보인다. 제안된 기술은 2.4 GHz 대역의 이동체 식별용 특정소출력 무선기기 기술기준을 만족하므로 45 dBm EIRP 출력을 이용하여 이동체 거리 센싱이 필요한 다양한 응용이 가능하다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.145-149
• /
• 2001

The most of faults in gas insulation of power facilities are caused by partial discharge. Therefore we simulated partial discharge and measured the radiated electromagnetic wave emitted from partial discharge in SF$_{6}$ gas by biconical antenna. This paper describes time delay and electric fields pulse characteristics of radiated electromagnetic waves with distance(1[m], 3[m], 5[m]) between antenna and discharge source.e.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2010년도 춘계학술대회
• /
• pp.128-129
• /
• 2010

기존의 고도계는 레이더 특성에 의해 직하부의 높이 값을 정밀하게 관측할 수 없었다. 그러나 레이더 간섭 고도계는 SAR(Synthetic Aperture Radar) 영상의 칩 펄스(Chirp Pulse)를 이용한 고정밀 경사거리(Slant Range Distance)관측, 도플러 효과를 이용한 고정밀 경사각(Squint Angle)의 관측 및 레이더 간섭기법(SAR Interferometry)을 이용한 고정밀 관측각(Look Angle)의 관측을 가능하게 하였다. 이 연구의 목적은 레이더 간섭 고도계의 효율적인 신호처리 기법의 개발에 있다.