• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.17-20
• /
• 1999

The retention and fatigue properties of ferroelectric LiNbO$_3$ thin films were studied. Metal-ferroelectric-semiconductor(MFS) devices by using rapid thermal annealed LiNbO$_3$/Si structures were successfully fabricated and demonstrated nonvolatile memory operations of the MFS devices. The I$_{D}$-V$_{G}$ characteristics of MFSFET\`s showed a hysteresis loop due to the ferroelectric nature of the LiNbO$_3$ thin film. The ferroelectric capacitors showed practically no polarization degradation up to about 10$^{10}$ switching cycles when subjected to symmetric bipolar voltage pulse (peak-to-peak 6V, 50% duty cycle) in the 500kHz. The retention properties of the LiNbO$_3$ thin films were quite good up to about 10$^{3}$ s . s .

• 간호행정학회지
• /
• 제15권1호
• /
• pp.64-71
• /
• 2009

Purpose: This study shows the prehospital emergency nursing practices, and analyzes them associated with their individual characteristics and job conditions. Method: Based on a survey of the National Emergency Medical Center in Korea(2008), principal components were extracted from 7 prehospital emergency nursing practices by factor analysis, and some regression analyses of principal components(CPR-AED and V/S-I.V.) were executed on individual characteristics and job conditions. Results: The PENs gave themselves higher order ratings for vital sign check, airway management for loss of consciousness patients, CPR for suspicious cardiac arrest, keeping vein open for shock patients, AED for abnormal pulse rate, AED for suspicious cardiac arrest, and AED for loss of consciousness. Age and duty periods were statistically significant influential factors on the CPR-AED component. Conclusion: The results indicate that the PENs were competent in overall prehospital emergency activities and procedures even some weak self-evaluations, and that the standard curriculum and practice standard for prehospital nursing should be developed in order to increase nursing leadership in prehospital emergency settings.

• 분석과학
• /
• 제10권3호
• /
• pp.187-195
• /
• 1997

[16]-ane-$S_4$/탄소분말 함량비를 50%로 하여 nujol oil과 혼합하여 수식전극을 제조하였다. $5.0{\times}10^{-4}M$ $Ag^+$를 포함하는 pH 4.5인 아세트 완충용액에 수식전극을 담가 $Ag^+$를 전극 표면에 흡착시켰다. 이 때 흡착시간을 15분으로 하고 전해환원시키는 시간은 -0.3V vs S.C.E에서 2분으로 하였다. 또한 0.1M $HNO_3$ 용액으로 전극을 활성화시켰으며 한번 활성화한 전극은 10회까지 사용이 가능하였다. 최적 분석조건에서 미분펄스 전압전류법으로 $5.0{\times}10^{-7}{\sim}1.5{\times}10^{-6}M$ 사이의 농도 범위에서 정량해 보았을 때 직선성이 잘 성립하였으며, 검출한계는 $2.0{\times}10^{-7}M$이었다. 대부분의 금속들은 방해를 주지 않았으나, Cu(II)은 방해를 나타내었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.73-74
• /
• 2013

본 논문은 LED Driver 휘도(Luminance) 제어 방식인 펄스폭 변조(PWM), 진폭변조 방식(PAM)을 조합한 스마트디밍 알고리즘에 대해 제안한다. 제안된 방식은 LED 구동 순방향 전류($I_f$)양에 따라 순방향 전압($V_f$)이 비례적으로 변화되는 특성을 이용한 것으로, LED Backlight 적용 LCM의 소비전력을 저감할 수 있다. 본 논문에서는 스마트 디밍 (CPWAM=Conditional Pulse Width Amplitude Modulation) 알고리즘에 대해 소개하고 실험을 통해 제안된 알고리즘의 타당성을 검증한다.

• 비파괴검사학회지
• /
• 제11권2호
• /
• pp.42-47
• /
• 1991

Nondestructive evaluation study was made on creep damage materials by ultrasonic spectrum analysis. The evaluation methods was developed in order to predict the change of ultrasonic attenuation with increasing creep damage. A new algorithm for the improvement of measuring accuracy of ultrasonic attenuation using a spectrum analysis has been developed. Normally, the ultrasonic attenuation is evaluated from 1st and 2nd peak values of the pulse-echo ultrasonic wave. The algorithm developed is incorporated in a measuring system which consists of a personal computer with ultrasonic apparatus and a digital storage oscilloscope. By the spectrum analysis method, it become popssible to describe approximately the attenuation change with increassing creep damage in Cr-Mo-V forging.

• Transactions on Electrical and Electronic Materials
• /
• 제5권5호
• /
• pp.185-188
• /
• 2004

Phase transitions from the amorphous to crystalline states, and vice versa, of GST(GeSbTe) and AST(AsSbTe) thin films by applying electrical pulses have been studied. These materials can be used as nonvolatile memory devices. The thickness of ternary chalcogenide thin films is approximately 100 nm. Upper and lower electrodes were made of AI. I-V characteristics after impressing the variable pulses to GST and AST films. Tc(crystallization temperature) of AST system is lower than that of the GST system, so that the current pulse width of crystallization process can be decreased.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 추계학술대회 논문집
• /
• pp.111-115
• /
• 2004

In this paper, the requirements for the HID lamp igniter transformer capable of hot strike are described. A small size high voltage (HV) transformer composed of a Rod type ferrite core and aluminum foil is designed. The Electro Magnetic characteristics are simulated with Finite Element Methodology (FEM). The design guideline of the HV transformer that produces an output voltage with a peak value of 25kV and a pulse width of larger than loons for a 35W automotive HID ballast prototype is discussed as an illustrative example.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.44-47
• /
• 2019

This paper is a study of recovery under load process of superconducting fault current limiter (SFCL). SFCL consists of five parallel-connected high-temperature superconductor (HTS) tapes additionally stabilized by stainless tape. Previously, HTS was heated by current pulse to simulate a short circuit in a power grid. During the cooling period, the current amplitude decreased to 23% or less of HTS critical current value, which is the simulation of network re-switching. When HTS with a polymer coating is cooled, temperature gradient on thermal insulation layer occurs, that prevents a boiling crisis and improves the heat sink into liquid nitrogen. Two samples are coated with a 30 ㎛ and 50 ㎛ polylactide (PLA) layers, reference sample has no polymer coating on it. Samples with a polymer coating show 3-5 times faster cooling than the reference one.

• Bulletin of the Korean Chemical Society
• /
• 제21권8호
• /
• pp.801-804
• /
• 2000

A crossed beam scattering of a $Pb(ZrxTi1-x)O_3plume$ and an oxygen jetwas studied by using a time-of-flight quadrupole mass spectroscopy. Both simple collisions and reactive scatterings had significant effects on the transportand energetics of ions in the plume. Relative enrichment of metal and metal oxide ions was also changed with the oxygen pulse because of the differences in the mass and chemical properties of the ions. In particular, an anomalous increase ofPb+ ions was observed as the oxygen jet crossed the plume at high laserfluences, while the signal magnitudes of alI other ions were reduced. This originates from the fact that PbO+ ions dissociate easily to liberate Pb+ ions inthe plume since the bond energy of PbO+ is as low as 2.2 eV.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1359-1360
• /
• 2006

lTO(Indium-Tin-Oxide) was used as anode material for OLED. Characteristics of ITO have great effect on efficiency of OLEDS(Organic light emitting diodes). ITO surface was treated by Nd:YAG laser in order to improve its chemical properties, wettability, adhesive property and to remove the surface contaminants while maintaining its original function. In this study, main purpose was to improve the efficiency of OLEDs by the ITO surface treatment: ITO surface was treated using a Nd:YAG(${\lambda}=266nm$, pulse) with a fixed power of 0.06[w] and various stage scanning velocities. Surface morphology of the ITO was investigated by AFM. Test OLEDs with surface treated ITO were fabricated by deposition of TPD (HTL), Ald3 (ETL/TML) and Al (cathode) thin films. Device performance of the OLEDs such as V-I-L was investigated using Source Measurement Unit (SMU: Keithly. Model 2400) and Luminance Measurement (TOPCON. BM-8).