• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.33-40
• /
• 2013

The cement industry brought very severe environment problems with massive carbon dioxide during its production. To solve this problem, attempts on Alkali-Activated Slag (AAS) concrete that perfectly substitutes industrial by-products such as ground granulated blast furnace slag (GGBFS) for cement are being actively made. AAS concrete is possible to have high strength development at room temperature, however, it is difficult to ensure the working time due to the fast setting time and the loss of workabillity because of the alkali reaction. In this study, the early age properties of alkali activated slag mortar are investigated to obtain the fundamental data for AAS concrete application to structural members. The water-binder ratio (W/B) was fixed at 0.35 and sodium hydroxide and waterglass as alkali activator was used. The compressive strength, the flow and the ultrasonic pulse velocity were measured according to the type of superplasticisers, which were naphthalene(N), lignin(L), melamine(M) and PC(P), up to a maximum of 2 percent by the mass of GGBFS. The results showed that adding melamine type of superplasticizer improved the fluidity of AAS mortar without decreasing the compressive strength, while naphthalene and polycarbonate type of superplasticizer had little effect on the fluidity of AAS mortar.

• Childhood Kidney Diseases
• /
• v.3 no.2
• /
• pp.232-236
• /
• 1999

IgA 신병증은 사구체 중맥에 IgA가 침착하는 것이 특징적인 질환이며 막성 사구체 신염은 IgG가 사구체 기저막의 상피하에 미만성으로 침착하는 질환이다. 원발성 사구체 질환중 IgA 신병증과 막성 사구체신염은 비교적 흔한 질환이나 전체적인 빈도는 낮은 편으로, 한 환자의 사구체에서 두 질환이 동시에 발생하는 경우는 매우 드물다. IgA 신병증과 막성 사구체신염의 중복 신염은 Doi등이 1983년 원발성 신질환으로서 처음 보고한 이래, 성인에서 20여례가 보고되었다. 저자들은 신증후군이 발생한 환아에서 신생검을 시행한 결과 원발성 신질환으로서 IgA 신병증과 막성 사구체신염의 소견이 동시에 보이는 중복신염의 드문 예를 경험하였기에 보고하는 바이다. 환아는 7세된 남아로 내원 한달 전부터 발생한 전신부종을 주소로 내원하였다. 가족력과 과거력상 특이 소견없었으며, 내원시 이학적 소견상 전신적인 허약감과 안와부종, 복부팽만, 하지의 함요부종이 관찰되었고, 검사소견에서는 WBC $19,800/mm^3$, Hb 14.1g/dL, Platelet $397,000/mm^3$, BUN/Cr 10/0.4mg/dL, protein/albumin 4.43/2.73g/dL, cholesterol 429mg/dL, IgA 85mg/dL, $C_3$ 68.8mg/dL, $C_4$ 13.4mg/dL, ANA(-), ANCA(-), RF(-), HBsAg/Ab(-/-)이었다. 뇨검사에서는 RBC many/HPF, WBC 2-3/HPF, protein ${\le}\;300mg/dL$ 였으며, 24시간 소변 검사상 protein 9.18g/day, Ccr 66.67ml/min의 소견을 보였다. 신생검을 시행한 결과 광학현미경상에서 몇몇 사구체의 분절성 경화와 중맥역의 증식이 관찰되었고, 면역형광현미경검사에서는 IgA(3+)가 과립상으로 미만성 분포를 보이며 중맥역에 침착되어 있고, 미세한 과립상과 위선의 양상으로 IgG(1+)가 모세혈관벽에 침착되어 있었으며, 전자현미경 소견상 중맥역과 모세혈관 기저막 상피하에 소량의 전자 고밀도 침착이 함께 관찰되었다. 환아는 prednisolone을 경구 투여 받았으나 단백뇨와 혈뇨가 지속되어 solumedrol pulse therapy, captopril과 cyclophophamide로 치료 받은 후, 전신 상태 호전되고, 혈뇨가 사라졌으며, 24시간 소변 검사상 단백뇨가 487.5mg/day로 감소하여 외래에서 추적 관찰 중이다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.54-54
• /
• 2003

최근 새로운 개념에 물성 구현을 위한 강유전체 산화물 인공격자의 연구가 활발히 진행되고 있다. 본 연구에서는 펄스레이져 증착법을 이용하여 산소분압 100 mTorr와 증착온도 50$0^{\circ}C$에서 LSCO/MgO 기판 위에 PbTiO$_3$(PTO) 와 PbZrO$_3$(PZO)을 주기적으로 적층하여 강유전체 산화물 인공격자를 형성하였다. 인공격자의 주기는 1~100 unitcell 까지 변화시켰다. 적층주기와 두께 변화에 따른 PZO/PTO 인공격자의 성장과 전기적 특성에 대하여 관찰하였다. X선 회절분석을 통하여 PZO/PTO 인공격자는 주기가 25 unit cell 이하의 적층구조에서 초격자의 형성으로 인한 위성피크가 관찰되었으며, 그 이하의 낮은 주기(1~10 unitcell)에서는 위성피크와 강한 (100)과 (200) 성장거동을 보였다. 높은 주기에서는 c축 성장된 PTO와 a축 성장된 PZO 각각의 성장거동을 보였다. 적층 주기가 감소함에 따라 a축 성장된 PTO와 c축 성장된 PZO가 초격자를 형성하였다. 적층주기가 감소함에 따라 유전상수와 잔류분극값이 향상되었다. 유전상수는 1 unitcell 주기에서 800정도의 값을 보였고, 잔류분극값은 2 unitcell 주기에서 2Pr=38.7 $\mu$C/$\textrm{cm}^2$ 정도의 가장 큰 값을 나타냈다. 적층주기가 2 unitcell에서 두께가 감소함에 따라 유전상수가 감소하였고, 20 nm 까지 분극반전에 의한 capacitance-voltage 특성곡선의 이력 현상(강유전성)을 관찰하였다. 이러한 산화물 인공초격자에서의 유전상수와 잔류분극값의 향상에 대하여 논의 할 것이며, 임계크기효과 관점에서 나노사이즈(50 nm~5 nm)에서 인공초격자의 전기적 분극의 안정성에 대하여 또한 논의 할 것이다.소수성 가스의 경우70% 이상 향상되었음을 알 수 있었으며, 본 연구를 통해 광분해를 이용한 스크러버가 기존설비의 장.단점을 충분히 보완 가능한 환경 설비임을 확인할 수 있었다. duty로 구동하였으며, duty비 증가에 따라 pulse의 on-time을 고정하고 frequency를 변화시켰다. dc까지 duty비가 증가됨에 따라 방출전류의 양이 선형적으로 증가하였다. 전압을 일정하게 고정시키고 각 duty비에서 시간에 따라 방출전류를 측정한 결과 duty비가 높을수록 방출전류가 시간에 따라 급격히 감소하였다. 각 duty비에서 방출전류의 양이 1/2로 감소하는 시점을 에미터의 수명으로 볼 때 duty비 대 에미터 수명관계를 구해 높은 duty비에서 전계방출을 시킴으로써 실제의 구동조건인 낮은 duty비에서의 수명을 단시간에 예측할 수 있었다. 단속적으로 일어난 것으로 생각된다.리 폐 관류는 정맥주입 방법에 비해 고농도의 cisplatin 투여로 인한 다른 장기에서의 농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았다이 낮았으나 통계학적 의의는 없었다[10.0%(4/40) : 8.2%(20/244), p>0.05]. 결론: 비디오흉강경술에서 재발을 낮추기 위해 수술시 폐야 전체를 관찰하여 존재하는 폐기포를 놓치지 않는 것이 중요하며, 폐기포를 확인하지 못한 경우와 이차성 자연기흉에 대해서는 흉막유착술에 더 세심한 주의가 필요하다는 것을 확인하였다. 비디오흉강경수술은 통증이 적고, 입원기간이 짧고, 사회로의 복귀가 빠르며, 고위험군에 적용할 수 있고, 무엇보다도 미용상의 이점이 크다는 면에서 자연기흉에 대해 유용한 치료방법임에는 틀림이 없으나 개흉술에 비해 재발율이 높고 비용이 비싸다는 문제가 제기되고 있는 만큼 더 세심한 주의와 장기 추적관찰이 필요하리라 사료된

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.680-687
• /
• 2018

Borehole radar is a radar used for underground resources and geological exploration purposes. It needs a high-speed sampler to transmit electromagnetic waves with a pulse width of several ns and to receive reflected waves of several tens to several hundreds of MHz reflected from the object to be surveyed. ETS (Equivalent-Time Sampling), which can achieve sampling performance of several GHz with a sampling frequency of several tens of MHz, is suitable for use as a sampler of a borehole radar receiver. In this paper, we propose a method to control the sampling clock delay, which is the most important factor in ETS sampler design, using four clocks with phase difference of $90^{\circ}$ for one clock source. The proposed method can reduce the time required to acquire the data within the set interval by 1/25 than the conventional method using the delay generator. When the implemented sampler is applied to the receiver of existing borehole radar, it is possible to accumulate 58 additional times due to the shortened sampling time. In addition, by using one delay control logic compared with the conventional method using several sampling clock delay control logic in order to satisfy the target sampling range, it is possible to omit the correction process which was necessary in the past. As a result, the structure of the system can be simplified and a uniform sampler can be realized.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.1
• /
• pp.16-23
• /
• 1987

The cyprinid loach, Misgurnus mizolepis $G\ddot{u}nther$, a freshwater teleost, is a member of the family Cobitidae and is known to distribute in Korea and China. This fish is considered to be an excellent food fish in Korea. This report is a description of the gross morphology of the embryos and larvae up to the development of juvenile period of life. The eggs were obtained by injecting gonadotropin and fertilized by wet method in the laboratory on July 10 in 1986. The inseminated eggs were rinsed with tap water and incubated at $25^{\circ}C$. Live, freshly laid eggs were separative, demersal, adhesive, light yellow and average 1.1mm in diameter. The hatching took place in about yellow and average 1.1mm in diameter. The hatching took place in about 24 hours after fertilization. The newly hatched larvae were average 2.7 mm in total length possessing yolk sac and 35-36 myotomes. Ten hours after hatching, the prelarvae attained 3.5 mm in total length. The first heart pulse and melanophores at the side of the body were observed at this stage. Yolk sac was completely reserved at four days after hatching. The larvae that was cultured 24 days after hatching, 15.4-16.4 mm in total length, entered the juvenile period of life. All the un rays were already peresent; D. III 6, A. III, 5, P.10, V. 4-5, C.14.

• Journal of Navigation and Port Research
• /
• v.36 no.6
• /
• pp.475-480
• /
• 2012

In order to establish eLoran (enhanced Long Range Navigation) system, it needs the advancement of receiver, transmitter, data channel addition for Loran information, differential Loran sites for compensating Loran-c signal and ASFs (Additional Secondary Factors) database, etc. In addition, the precise synchronization of transmitting station to the UTC (Coordinated Universal Time) is essential if Loran delivers the high absolute accuracy of navigation demanded for maritime harbor entrance. For better timing synchronization to the UTC among transmitting stations, it is necessary to measure and monitor the transmission delay of the station, and the correction information of the transmitting station should be provided to the user's receivers. In this paper we presented the measurement method of absolute delay of Pohang Loran transmitting station and developed a time delay measurement system and a phase monitoring system for Loran station. We achieved -2.23 us as a result of the absolute phase delay of Pohang station and the drift of Loran pulse of the station was measured about 0.3 us for a month period. Therefore it is necessary to measure the delay offset of transmitting station and to compensate the drift of the Loran signal for the high accuracy application of PNT (Positioning, Navigation and Timing).

• Journal of the Korean Chemical Society
• /
• v.39 no.5
• /
• pp.421-426
• /
• 1995

The hydrogels of hydrophilic three-dimensional methacrylate polymer networks were prepared from 2-hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethacrylate (EDGMA) in aqueous solution. The interaction of water with the hydrophilic methacrylate polymers in the hydrogels was studied by pulse NMR spectroscopy. The spin-lattice relaxation times (T1) of low water content hydrogels showed the different double environments, resulting in two spin-lattice relaxation times (T1a and T1b). The values of T1a and T1b were 16.4${\times}$10-3 sec and 58.2${\times}$10-3 sec for a p(HEMA)-(10% H2O) system, and 13.2${\times}$10-3 sec and 23.1${\times}$10-3 sec for a crosslinked EGDMA-p(HEMA)-(10% H2O) system, respectively. The spin-spin relaxation times (T2) of the hydrogels were also measured as a function of water content in the p(HEMA)-(H2O)n and crosslinked EGDMA-p(HEMA)-(H2O)n system. The values of T2 were approximately 10 times less than those of T1 in agreement with the principles of spin relaxations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3A
• /
• pp.163-172
• /
• 2011

The CFTA girder developed is a concrete filled steel tubular system with arched shape and external post-tensioning (PT) tendons which control the initial camber and the bending stress of the girder. In the present study the effects of the PT tendons on the dynamic behavior of the girder subjected to a moving vehicle load are numerically investigated. Various levels for the tendon quantity and the tendon forces are considered, using the existing FE model of the girder. The vehicle considered is a DB-24 truck and is modeled with two tracks-three axles. Equivalent-load pulse time histories are applied to each node to simulate the moving vehicle, depending on the time of arrival and the discretization. The vehicle speeds are varied from 40 km/hr to 100 km/hr with increment of 20 km/hr. The analysis results show that the tendon forces do not produce any influences on the dynamic responses of the girder. However the dymamic deflection of the girder increases when a smaller amount of tendons is used. The Dynamic Amplification Factors (DAF) are evaluated based on the static and dynamic responses. Much lower values of the DAF are obtained, even no tendons applied, than those provided by the design criteria of the AASHTO LRFD and the Korea Highway Standard Specification.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.431-441
• /
• 2003

This paper presents the design of 32 bit microprocessor for a sequence control using a field programmable gate array(FPGA). The microprocessor was designed by a VHDL with top down method, the program memory was separated from the data memory for high speed execution of sequence instructions. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 32 bits. And the real time debug operation was implemented for easeful debugging the designed processor with a single step run, PC break point run, data memory break point run. Also in this designed microprocessor, pulse instructions, step controllers, master controllers, BM and BCD type arithmetic instructions, barrel shift instructions were implemented for sequence logic control. The FPGA was synthesized under a Xilinx's Foundation 4.2i Project Manager using a V600EHQ240 which contains 600,000 gates. Finally simulation and experiment were successfully performed respectively. For showing good performance, the designed microprocessor for the sequence logic control was compared with the H8S/2148 microprocessor which contained many bit instructions for sequence logic control. The designed processor for the sequence logic showed good performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.3
• /
• pp.244-250
• /
• 2018

Multilateration acquires the transponder signal of target from receivers installed on the ground and calculates the position of the target using the difference of the signal acquisition time of each receiver. One of the factors that influence the positioning accuracy of Multilateration using the TDOA calculation method is the error due to the precision measurement of signal input time. When measuring the signal input time at the receiver, the input signal is sampled using the reference clock of the receiver and a reference sample having the same sampling rate is applied to the cross correlation technique. Therefore, the accuracy of the signal input time is proportional to the reference clock. In this paper, the algorithm for precisely measuring the signal input time by performing cross correlation between the input signal of the receiver and DRS(Delayed Reference Sample) is proposed. In order to verify this, we implemented the pulse signal of the transponder that is transmitted from the target using Matlab. Through the simulation, cross correlation between the proposed DRS and the input signal was performed. From this result, the performance of the precise measurement of signal input time was analyzed.