• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.729-736
• /
• 2016

It is necessary to recycle and reuse waste paper for preservation of the global environment. Instead of a solid deinking agent, liquid deinking agents have been made using various fatty acids with EO/PO added for higher deinking effect. The removal efficiency of ink on waste paper was evaluated by the ERIC and brightness properties after processes of recycling pulping (sample composition ONP: OMG = 5:5, concentration 15%, temperature $45^{\circ}C$, pulping time 20 min.) and flotation (concentration 1%, temperature $45^{\circ}C$, air flow 7 L/min, time 8 min.). Also, the ink reattachment of paper was evaluated by hyperwashing. The results show that it is effective for mass-preparation to saponify oleic acid with KOH at $80^{\circ}C$ and to add EO/PO. This deinking agent was used in a paper plant, and we evaluated the brightness, color, and ERIC. The deinking agent showed excellent performance.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.1
• /
• pp.60-71
• /
• 1992

To investigate the delignification behaviour in solvolysis pulping process, Populus alba ${\times}$ glandulosa H. and Pinus Kuraiensis S. et Z. were cooked with p-cresol and vater solvent(2:8, 5:5, 8:2 v/v) at $175^{\circ}C$ for 9 cooking time levels(20, 40, 60, 80, 100, 120, 140, 160, 180, min). Pulp yield, residual lignin content, de lignification rate, decarborhydration rate were determined. Delignification behaviours were analyzed by TEM. 1. The p-cresol-water solvent cooking of P. alba ${\times}$ glandulosa showed good delignification at the solvent system which the mixture ratio of p-cresol and water were 2:8(v/v), while the cooking of P. koraiensis with the p-cresol and water mixture ratio of 5:5 was no good. 2. P. alba ${\times}$ glandulosa showed three step-delignification phenomena at the solvent system which the mixture ratio of p-cresol and water were 2:8(v/v) anti 5:5(v/v). But P. koraiensis showed a first order delignification reaction at the same mixture ratio of p-cresol and water solvent system. 3. In TEM micrograph obtained for the solvent system which the mixture ratio of p-cresol and water was 5:5(v/v), the partial delignification of the cell corner of P. alba ${\times}$ glandulosa and P. koraiensis were observed at 60min. of cooking time. Complete delignification at the cell corner of P. alba ${\times}$ glandulosa was observed at 160min. and that of P. koraiensis was observed of 180min. of cooking time. 4. In optical microscopic observation, fiber separation of P. alba ${\times}$ glandulosa occured at 120min. and that of P. koraiensis began at 140min. of cooking time. 5. At the solvent system which the mixture ratio of p-cresol and water was 5:5(v/v), middle layer on secondary wall($S_2$) and cell corner of P. alba ${\times}$ glandulosa were more selectively delignified than primary wall(P) and outer layer on secondary wall($S_1$). However P. koraiensis did not showed any difference in delignification between cell wall layers and cell corner.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.561-567
• /
• 2010

In this study, we evaluated optimal conditions for ethanol production of the spruce hydrolysate (SH) obtained from diethyl oxalate pretreatment. Fermentable sugar concentration in SH was 29.04 g/${\ell}$ except arabinose. Monosaccharides obtained from the oligomer degradation were mainly mannose (39.26 g/${\ell}$) and galactose (12.83 g/${\ell}$). Concentration of 5-HMF and furfural which are inhibitors on ethanol fermentation were 0.09 g/${\ell}$ and 0.04 g/${\ell}$ respectively. Concentration of acetic acid and total phenolic compounds in SH were 1.4 g/${\ell}$ and 2.83 g/${\ell}$. Ethanol production using hydrolysate was 11.7 g/${\ell}$ at optimal pH 6.0 after 48 h. Specific ethanol production was 0.15 (g/(${\ell}^*h$)) at pH 5.0 and 5.5. while that was 0.24 (g/(${\ell}^*h$)) at pH 6.0. Specific ethanol production has difference depend on initial pH for fermentation. Ethanol production was 14.3 g/${\ell}$ after 48 h when xylanase 20 IU was added in SH for degradation of oligomer during fermentation. It implied that ethanol production increased by 22.2% compare with control (without xylanase).

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.2
• /
• pp.1-30
• /
• 1981

To investigate the formation of the chromophoric structures taking place during the alkaline pulping vanillyl alcohol [${\alpha}-^{13}C$] guaiacylglycerol-${\beta}$-aryl ether [${\alpha}-^{13}C$ or ${\gamma}-^{13}C$] and phenylcoumarn [${\alpha}-^{13}C$] units as model lignins were treated with 1N sodium hydroxide at 165$^{\circ}C$ for 1.5-3 hours. From the chemical structures of the isolated products and $^{13}C$-NMR Spectra of the reaction mixtures, the main conclusion is as follows; 1) Condensation products of II-1-5 were identified from the reaction mixture of vanillyl alcohol treated with alkali and theses compounds afforded the quinonmethide structure(Fig. 3-7) by air oxidation. 2) Treatment of guaiacylglycerol-${\beta}$-aryl ether unit gave ${\varphi}$-aryl-${\beta}$-aroxy quinone structures (IV-15, IV-16), diguaiacyl-1, 4-penta-diene ${\beta}$, ${\beta}$'-diaroxyl distyrene methane unit, ${\beta}$-aroxy distyrene methane. These distyrene methanes of the compounds are transformed by air oxidation into the corresponding o-quinonemethide units (V-8, V-9). 3) On the treatment of phenylcoumaran, the stilbene derivative was formed in quantitative yield and dimerized(VI-11) in preference to oxidation to the corresponding extended quinone structures. The chromophoric structures taken place during the alkaline treatment of the model lignins are thought to be some important types in alkaline pulping on the basis of the reaction mechanism in this experiment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.5 s.108
• /
• pp.69-77
• /
• 2004

Degradations of pine, yellow poplar and sweet gum by two fungi, Pycnoporus cinnabarinus and Trichophyton rubrum LSK-27 were investigated. P. cinabarinus degraded pine block samples much faster than T rub rum LSK-27, whereas P. cinnabarinus and T rubrum LSK-27 degraded yellow poplar and sweet gum at almost the same rate. In an effort to get a better understanding of how fungi degrade lignin in wood, contents of various functional groups were analyzed. After three-months of degradation of pine flour by these fungi, the following changes were observed: an increase in condensed phenolic OH group and carboxylic acid group content, a decrease in the guaiacyl phenolic OH content, and little change of aliphatic OH group content. Further studies in the degradation of pine flour by P. cinnabarinus indicated that the increase in condensed phenolic OH group content and the decrease in guaiacyl phenolic OH group content occurred in the first month of the degradation. The changes of functional group contents in the degradation of unbleached softwood kraft pulp by P. cinnabarinus had the same trends as those in the degradation of pine flour. That is, structural alteration of lignin due to the kraft pulping process had little effect on how P. cinnabarinus degraded lignin.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.5 s.108
• /
• pp.62-68
• /
• 2004

The amount of non-lignin components in unbleached and oxygen-delignified kraft pulps and their impact on lignin determinations was investigated. The lignin analyses investigated were kappa number and Klason lignin in conjunction with acid-soluble lignin. The species investigated were loblolly pine, and aspen. The non-lignin components that impacted on lignin determination were residual extractives and hexenuronic acid in unbleached and oxygen-delignified kraft pulps. In the hardwoods, significant amounts of extractives remained after kraft pulping and oxygen delignification. These residual extractives in the hardwood pulps had an impact on the lignin determination, more so on the acid lignin method than kappa number. Hexenuronic acid only impacts on kappa number determination both softwood and hardwood pulps, not on acid lignin. Hexeneuronic acid contributed as lignin content more in aspen than pine pulps, and more in oxygen-delignified than unbleached kraft pulps. Impact of hexenuronic acid on should be corrected both softwood and hardwood pulps for accurate kappa number.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.11a
• /
• pp.1-8
• /
• 2003

변색목재의 화학적 성질을 조사한 결과, 처리전.후의 유기용매추출물 함량에 있어서 소나무재 및 리기다소나무재 공히 노화 및 변색균처리포 그 함량이 낮아지는 결과를 나타냈는바, fatty acids와 sterols 은 3주간 노화처리로 10.6-11.2%, 변색균처리로 36-41.1%의 높은 감소율을 나타냈다. triglycerides도 3주간 노화처리로 5.68-9.4%, 변색균처리로 38.5-40.0% 높은 감소율을 나타냈다. resin acids의 경우 3주간 노화처리로 6.1-11.3%, 변색균처리로 36-41.5%의 감소율을 나타냈다. 변색목재의 펄프화와 관련하여 소나무재 및 리기다소나무재의 크라프트펄프화결과, 알칼리펄프화에 비하여 펄프수율이 2-3% 높아졌다. 최적펄프화조건으로 활성알칼리농도 20%에서 펄프수율이 46.9-47.8%, reject율이 3.21-3.52%로 낮았다. 변색균처리한 목재도 활성알칼리 20%에서 펄프수율이 비교적 높은 43.5-45%를, reject율이 1.3-1.45%로서 변색균처리 모두에서 현저히 낮아짐을 알 수 있었다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.5
• /
• pp.27-33
• /
• 2011

Hemp bast pulp cooked at temperature below $100^{\circ}C$ followed by defibration by the knife and the valley beater, respectively was mixed with softwood pulp varying the amount of hemp pulp in order to find the optimum condition for making hemp-wood paper. Both the knife and the valley beaters contributed to the dispersion of pulp fiber well. Lots of shives were found when the knife beater was applied exclusively, but the fibers were dispersed well when freeness dropped to 600 mL CSF and 500 mL CSF by the valley beater. Air resistance decreased drastically below 500 mL CSF where rapid disrupture of pulp fiber occurred. As the values for freeness and hemp fiber content increased, so did roughness and bulk. It was apparent that the tear strength of hemp-wood paper was on the rise drastically as hemp fiber content increased. Nevertheless the optimum hemp fiber content of hemp-wood paper would be 20% considering the decrease in both tensile and burst strengths as well as sheet formation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.84-92
• /
• 1999

Excellence of the Korean traditional paper(Hanji) can be proved by literatures and legacies handed down from generations. However, with the problems pertaining to a majority of traditional manufactures, Hanji industry was declined because of low productivity, insufficient supply of raw material , and reduced demand. therefore, modernizxation of the Hanji technology and development of new uses are very important. This study was carried to investigated the papermaking characteristics of Morus spp.(M.alba, M.Bombycis, and M.Ihou) for new Hanji, modernize manufacturing process of Hanji by grafting on developed modern pulping and papermaking technology, develop the various uses, and establish the foundation for development of high value-added products. Hanji is made from M.Ihou, while stalk , and sulfomethylated pulp gave better sheet formation and higher brightness than those of the others. Physical properties of Hanji which made from bast fiber pulps were better than those of whole stalk pulps. Hanji which made from M.bombycis bast fiber and whole stalk pulps were not so good sheet strength as other species. Sulfomethylated whole stalk pulps were shown better sheet strength than alkali and alkali-hydrogen peroxide whole stalk pulps.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.3
• /
• pp.52-59
• /
• 2004

The greater Increase of the demand for environmental friendly materials especially for packaging industry leads to the larger interest in the reusable and recycable materials such as pulp mold. Although the pulp mold has great characteristics for packaging, some deficiency compared with other packaging material like EPS(Expandable Polystyrene) need to be overcome, for example, the relative higher cost. In this report, since the water drainage rate at the forming zone of a wet pulp mold process could have a great influence on the economical efficiency not only by increasing machine speed but also reducing the drying energy, the optimum ways for increasing drainage were investigated The mechanism of vacuum drainage In pulp mold forming was successfully evaluated by using RDA(Retention and Darinage Analyzer). Since the conditions of stock were greatly affected by the pulping time of low consistency pulper, the optimum pupling time was investigated with considerations of all stock preparation processes. The change of stock temperature and the addition of polyelectrolyte could improve the vacuum drainage rate. It was founded that the wire mesh types of mold former had a little influence on the retention because of the relatively mild vacuum drainage. However, the bigger size of dewatering hole showed better drainage rate and could reduce the plugging and con lamination of mold.