• Restorative Dentistry and Endodontics
• /
• 제32권3호
• /
• pp.198-207
• /
• 2007

본 연구는 다양한 접착 과정과 기전을 지닌 4종의 상아질 접착제를 이용하여 수산화칼슘의 사용 여부 및 그 적용 기간이 접착강도에 미치는 영향을 측정 및 평가하고 주사전자현미경을 이용한 접착 계면의 관찰을 통해 복합레진 수복이나 레진 시멘트를 이용한 수복물 접착 시에 적절한 상아질 접착제의 선택과 사용방법을 알아보고자 시행하였다. 치수강에 근접한 상아질 표면을 노출시킨 후, $Ca(OH)_2$를 생리식염수와 혼합하여 실험군 치아 24개의 상아질 표면에 적용한 후, IRM (Intermediate Restorative Material, Dentsply Caulk, Milford, USA)으로 적용된 수산화칼슘 및 변연 부위의 상아질과 법랑질 모두를 밀폐하여 $36.5^{\circ}C$ 증류수에서 실험기간 (7일 및 30일) 동안 보관하였다. Scotchbond Multipurpose, Single Bond, SE Bond and Prompt L-Pop 등 4종의 상아질 접착제를 제조사의 지시에 따라 적용하고 복합 레진을 3회에 나누어 총 5 mm 높이로 적층한 뒤 각 층마다 20초씩 광조사를 시행하였다. Universal testing machine을 이용하여 1mm/min의 crosshead speed로 하중을 가하여 미세인장 접착 강도를 측정하고 파단면을 주사전자현미경으로 관찰하였다. 이상의 연구 결과에서 단기간 (7일 또는 30일간)의 수산화칼슘 적용은 상아질 접착제의 접착 과정의 차이에 따른 변화를 나타내지 않는 것으로 평가되었다.

• 대한치과교정학회지
• /
• 제39권4호
• /
• pp.213-224
• /
• 2009

본 연구에서는 세라믹 브라켓 제거에 Er:YAG 레이저 조사가 도움이 되는지 알아보고, 브라켓 제거에 적합한 레이저 조사 방법을 연구하였으며, 또 이렇게 적용된 레이저가 치수와 법랑질에 손상을 주는지도 알아보았다. 총 190개의 치아, 단결정 세라믹 브라켓(MISO), 다결정 세라믹 브라켓(Transcend series 6000)과 KEY Laser3를 사용하였다. 실험군은 세라믹 브라켓의 종류(단결정, 다결정)와 레이저의 에너지(140, 300, 450, 600 mJ)에 따라 분류하였으며, 레이저를 브라켓당 두 곳에 1펄스씩 조사하고, 전단 강도를 측정하였다. 대조군은 레이저를 조사하지 않는 군으로 하였다. 레이저 조사에 의한 열 효과는 브라켓 하방 법랑질과 치수강에서 측정하였으며, 전단 강도 측정 후 치면에 남아있는 접착제의 양을 접착제 잔류 지수(adhesive remnant index)를 이용하여 평가하였다. 레이저 조사로 인한 접착제의 파괴 양상과 법랑질 표면 변화를 주사전자현미경으로 관찰하였다. 모든 세라믹 브라켓군에서 레이저 에너지가 증가할수록 전단 강도는 유의하게 감소하였다. 또한, 브라켓 하방 법랑질에서 최대 온도 변화는 평균 $3.78^{\circ}C$ 상승에 그쳤으며, 치수강에서 최대 온도 변화는 평균 $0.9^{\circ}C$ 상승에 그쳤다. 주사전자현미경을 이용한 법랑질과 접착제 단면 관찰에서 접착제 표면이 레이저에 의해 붕괴되어 분화구 모양의 구덩이로 관찰되었으며, 일부 시편에서 약 $10\;-\;30{\mu}m$의 법랑질 손상이 발견되었다. Transbond XT로 부착된 단결정 도재 브라켓(MISO)의 디본딩에 Er:YAG 레이저를 이용할 경우, 300 - 450 mJ의 레이저 에너지를, 그리고 다결정 도재 브라켓(Transcend series 6000)의 경우는 450 mJ 정도의 에너지를 사용하는 것이 효과적이고 안전할 것으로 생각된다.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.91-97
• /
• 2015

Papermakers wish to increase the filler content of printing and writing grades because it allows saving in production cost through fiber replacement and improving the formation, and optical and printing properties of the paper. However, high filler loading in the base paper has negative side effects. It reduces the mechanical properties of paper and induces cracking at the fold after coating process. Fold cracking is one of the most frequent quality complaints for magazines, high quality books, etc. Two approaches were examined as methods to reduce fold cracking. One approach was to use preflocculated fillers, which was expected to reduce the fold cracking because it would decrease the interfiber bonding. The other approach was to use a new coating binder that gives greater binding power and thereby provides an opportunity of reducing the fold cracking of coated paper. When filler preflocculation was employed in producing the base paper, fold cracking becomes more severe than conventional filler loading condition. On the other hand, use of nano sized binder in coating improved the tensile properties of the coating layer and thereby decreased the crack area. It was shown that tensile properties of coating layer played an important role in fold cracking of coating.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 제33회 펄프종이기술 국제세미나
• /
• pp.47-70
• /
• 2008

Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.656-669
• /
• 1998

Hydrogen peroxide at high concentration during walking bleaching may cause damage to the tooth structure and to the surrounding periodontal tissues and may develop external root resorption. Clinically, It is so important to find a method of prevention or minimization of these complications. The efficacy of various chamber-irrigating agents to eliminate residual hydrogen peroxide after walking bleaching was examined and compared with water rinse in this study. Extracted human 46 premolars without any cementoenamel junction defects were treated endodontically and based with IRM to 1 mm below CEJ and totally bleached 3 times for each tooth with 30% hydrogen peroxide and sodium perborate. Upon completion of the 3rd walking bleaching procedure, the cervical portion and pulp chamber of each group of teeth were irrigated with catalase, 70% ethylalcohol, acetone, and distilled water. And then, a radicular hydrogen peroxide penetration was measured with spectrophotometer immediately after each bleaching and following treatment with each chamber-irrigating agents, and the significance of their eliminating efficacy of residual hydrogen peroxide was analyzed by Kruskal-Wallis test. The results were obtained as follows. 1. Cervical root penetration of hydrogen peroxide was increased as the bleaching procedure was repeated(P<.01). 2. The most effective irrigant that removed residual hydrogen peroxide was the catalase, and the least effective one was water rinsing (P<.01).; there was no significant difference between the acetone and ethanol group. 3. The Irrigation with antioxidant enzyme or water-displacement solutions can eliminate residual oxygen radicals from the pulp chamber effectively after walking bleaching. So, these agents can reduce adverse effects such as cervical external resorption and periapical inflammation and prevent residual $O_2$ from impeding composite resin polymerization, thus increase the bonding strength of composite resin. This, in turn reduces microleakage and discoloration of the esthetic restoration, extending its service-life.

• 공업화학
• /
• 제9권4호
• /
• pp.529-535
• /
• 1998

탈묵공정에서 고지 배합처리, 온도, 양품 배합처리 등의 해리 공정조건 변동에 의한 탈묵펄프의 영향을 조사하였다. 실험계획법으로써 탈묵펄프에 주된 영향을 미치는 유의한 인자를 선정하였으며, 통계분석기법 중 하나인 분산분석 및 다중비교를 통해 공정조건의 최적수준조합을 결정하고 이에 따른 백색도 및 강도적 특성의 추정치 및 신뢰구간을 구하였다. 백색도는 $Na_2SiO_3$ 2.0%, $H_2O_2$ 0.5%, 고지 배합처리 (국내신문고지 : 수입신문고지 : 매거진 = 40 : 30 : 30 wt %)의 조건에서 가장 높은 추정치 50.5%와 90% 신뢰구간 (49.0, 52.0)을 얻을 수 있었다. 인장지수는 $H_2O_2$ 0.5%, 해리 온도 $50^{\circ}C$의 조건에서 가장 높은 추정치 $35.7N{\cdot}m/g$과 90% 신뢰구간 (34.6, 36.6)을 얻을 수 있었다. 파열지수는 계면활성제 0.1%, 해리 온도 $50^{\circ}C$의 조건에서 가장 높은 추정치 $0.129kPa{\cdot}m^2/g$과 90% 신뢰구간 (0.125, 0.133)을 얻을 수 있었다.

• 펄프종이기술
• /
• 제39권1호
• /
• pp.38-47
• /
• 2007

This study was carried out to develop a new application field and obtain the basic data of citrus peel as waste in Jeju island and traditional Hanji for producing functional Hanji. The results measuring physical and optical properties, water vapor permeance and antibacterial activity are as follows. It was revealed that apparent density go as down but bulk raise up in the structural view of Hanji with increasing of the addition various Korean citrus peel (citrus unshiu, cheonggyun and hanrabong peel, and citrus unshiu peel powder) percentages, and that the density of Hanji added citrus unshiu peel was higher, but bulk was lower in compared with Hanji added other kinds of peel. Those Hanji added citrus unshiu peel, cheonggyun peel, hanrabong peel and citrus unshiu powder were very great not only in the strength (breaking length, burst index, tear index and folding endurance) but also in water vapor permeant rate in comparison with Hanji. The pHs of Hanji were neutrality (7 to 8). The brightness of the Hanji added various citrus peel percentages was low in compared to Hanji, and the 40% addition of hanrabong peel was the lowest. When 40% hanrabong peel was added to Hanji, it was very yellow in the color degree. When cheonggyun peel was added to Hanji manufacture, water vapor permeant rate was highly effective. It is known that vacant space of intrafiber was reduced by image analysis of Hanji and the additions of peel of citrus unshiu, cheonggyun and hanrabong were distributed equally in the interior of Hanji. The antibacterial activity of Hanji added citrus unshiu peel is more than 98%. After all, it would be able to increase utilization of Hanji, extensively. Namely, production of high quality Hanji added functional materials is expected for new valuable industry of citrus peel and Hanji.

• Tissue Engineering and Regenerative Medicine
• /
• 제15권6호
• /
• pp.735-750
• /
• 2018

BACKGROUND: The major challenge of tissue engineering is to develop constructions with suitable properties which would mimic the natural extracellular matrix to induce the proliferation and differentiation of cells. Poly(${\varepsilon}$-caprolactone)-poly(ethylene glycol)-poly(${\varepsilon}$-caprolactone) (PCL-PEG-PCL, PCEC), chitosan (CS), nano-silica ($n-SiO_2$) and nano-hydroxyapatite (n-HA) are biomaterials successfully applied for the preparation of 3D structures appropriate for tissue engineering. METHODS: We evaluated the effect of n-HA and $n-SiO_2$ incorporated PCEC-CS nanofibers on physical properties and osteogenic differentiation of human dental pulp stem cells (hDPSCs). Fourier transform infrared spectroscopy, field emission scanning electron microscope, transmission electron microscope, thermogravimetric analysis, contact angle and mechanical test were applied to evaluate the physicochemical properties of nanofibers. Cell adhesion and proliferation of hDPSCs and their osteoblastic differentiation on nanofibers were assessed using MTT assay, DAPI staining, alizarin red S staining, and QRT-PCR assay. RESULTS: All the samples demonstrated bead-less morphologies with an average diameter in the range of 190-260 nm. The mechanical test studies showed that scaffolds incorporated with n-HA had a higher tensile strength than ones incorporated with $n-SiO_2$. While the hydrophilicity of $n-SiO_2$ incorporated PCEC-CS nanofibers was higher than that of samples enriched with n-HA. Cell adhesion and proliferation studies showed that n-HA incorporated nanofibers were slightly superior to $n-SiO_2$ incorporated ones. Alizarin red S staining and QRT-PCR analysis confirmed the osteogenic differentiation of hDPSCs on PCEC-CS nanofibers incorporated with n-HA and $n-SiO_2$. CONCLUSION: Compared to other groups, PCEC-CS nanofibers incorporated with 15 wt% n-HA were able to support more cell adhesion and differentiation, thus are better candidates for bone tissue engineering applications.

• Restorative Dentistry and Endodontics
• /
• 제13권2호
• /
• pp.337-348
• /
• 1988

The purpose of this study was to examine the fracture strength and characteristics of teeth with MOD cavity preparation. Freshly extracted sound maxillary premolars were cleaned and stored in normal saline solution $37^{\circ}C$ for 72 hours before experiments. The roots of teeth were embedded in a self-curing resin, and the exposed crown were maintained in a vertical position by a modelling wax in a brass ring. The MOD cavities were prepared with No. 57 carbide bur under high speed to a depth of 2.0mm and a width of 2.0mm(Fig.1). All the prepared teeth specimens were divided into 7 groups according to the mode of cavity form and restorative materials (Table 1, 2): Group I, unpreapred, intact teeth as control Group II, prepared cavity without restoration Group III, prepared teeth restored with amalgam Group IV, prepared teeth restored with composite resin (P-10) Group V, prepared teeth with beveled enamel margins restored with composite resin (P-10) Group VI, prepared teeth restored with light-cured composite resin (P-30) Group VII, prepard teeth with beveled enamel margins restored with light-cured composite resin (P-30) After placement of restorations, all of the specimens were stored in water at $37^{\circ}C$ for 72 hours before testing. All of the specimens were tested on the Instron Universal Testing machine (No. 6025) in order to evaluate the strength of fracture. One metal ball 5.0mm in diameter contacting the specimens parallel to the occlusal surface was used to in this study (Fig. 1). The fracture characteristics of the specimens were examined with naked eye and in the scanning electron microscope (JSM-20). The results obtained from this study were as follows: 1. The mean fracture strength was the highest in group VI and that in group II was the lowest. 2. The progress of crack of teeth propagated into the pulp cavity. 3. In case of the group of the restored teeth, the crack occurred to be accompanied with cuspal fracture. 4. The crack of restored teeth was initiated along the pulpo-axial line angle of the cavity.

• 한국의류학회지
• /
• 제32권9호
• /
• pp.1366-1375
• /
• 2008

This studies were carried out in order to develope environmentally-friendly fiber materials and substitute resources of Paper mulberry. Various plant fibers such as New Zealand flax, Indian mallow, Kuzu vine and Yucca were used as raw materials of hand-made papers. We rotted these 4 kinds of plant fibers and removed non-cellulose. After rotting, the pulping rate(%) and the length of fibers in pulps were measured. The physical characteristics of papers made of various plants fiber were investigated and the probabilities of practical use were considered. The results were as follow: The non-cellulose contents of plant fibers were $30{\sim}40%$ and those contents must be lower down to 8% to be able to manufacture the hand made papers. The lignin in pulps were removed almost and the hemicellulose were partially removed to reach up to appropriate level of the pulp rates and fiber lengths. The more hemicellulose removed, the finer fiber thickness were and rapidly the lower Hanji tensile strength were. But the tear strength of these plants of hand-made papers do not decreased so much as tensile strength. So the property of 4 types of plant fibers might be of great advantages to make hand-made papers. Both tensile and tear strengths of Hanji of New Zealand flax, Indian mallow, Kuzu vine and Yucca were higher than Paper mulberry hand-made paper. When 30% of mulberry paper were mixed, the mixing effect showed maximum. Because of the functions of all plant fiber hand-made papers showed better than those of Paper mulberry hand-made paper, 4 types of plant fibers could be substitute Paper mulberry.