• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.209-212
• /
• 2002

As the mask design rules get smaller, the probability of the process failure becomes higher doc to the narrow overlay margin between the contact and metal interconnect layers. To obtain the minimum process margin, a tabbing and cutting method Is applied with the rule based optical\ulcorner proximity correction to the metal layer, so that the protection to bridge problems caused by the insufficient space margin between the metal layers can be accomplished. The side-lobe phenomenon from the attenuated phase shift mask with the tight design rule is analyzed through the aerial image simulation for test patterns with variation of the process parameters such as numerical aperture, transmission rate, and partial coherence. The corrected patterns are finally generated by the rules extracted from the side-lobe simulation.

• 전자공학회논문지A
• /
• 제33A권6호
• /
• pp.144-150
• /
• 1996

The purpose of this paper is to develop a simulation program to predict resist prifile in electron-beam lithography, where the main issue is proximity effect. The simualtion program composes of monte-carlo simulation, exposure simulation and development simulation. In nonte-carlo simulation, the absorbed energy in the resist is calculated when one electron is incident into resist, using hybrid model on the basis of the rutherford differential scattering cross section and moller theory. In exposure simulation, the absorbed energy in the resist is calculated when electrons are incident in exposure pattern. In the program, the developed profile depending on time is obtained by string model. The 0.2$\mu$m and the 0.3$\mu$m line and space patterns are experimentally delineated and compared to the simulation results to check the relevance of the program.

• 한국레이저가공학회지
• /
• 제2권3호
• /
• pp.52-61
• /
• 1999

The laser induced forward transfer(LIFT) technique employs a pulsed laser to transfer parts of a thin metal film from an optically transparent target onto an arbitrary substrate in close proximity to the metal film on the target. In this work, a two-step method, the combination of LIFT process, in which a Au film deposited on the $Al_2$O$_3$ substrate by Nd:YAG laser and subsequent Au electroless metal plating on the by LIFT process generated Au seed, was presented. The influence of laser parameters, wavelength, laser power, film thickness and overlap ratio of pulse tracks, on the shapes of deposit and conductor line after electroless plating is experimentally studied. As a results, the threshold power densities for ablation, deposition and metallization were determined and comparison of threshold value between the wave length 1064nm and the second harmonic generated 532nm. In odor to determine a possible application in the electronic industry, a smallest conduct spot size, line width and isolated line space were generated.

• 한국조경학회:학술대회논문집
• /
• 한국조경학회 2007년도 Journal of Landscape Architecture in Asia Vol.3
• /
• pp.94-98
• /
• 2007

Mountains have been playing an important role in the Japanese culture. It is important from landscape planning perspectives to maintain mountains in the proximity of cities. In this thesis, the geographical perception of residents in Kohoku New Town has been studied. Geographical changes before and after the Kohoku New Town development were clarified first. Following these clarifications, interviews with residents who moved into the area before and after the development were conducted. In this investigation, the interviewees were asked about mountains, valleys, hills, and slopes; and the areas that they recognize on the map were then specified. From these results, the mountain area which residents recognize and the actual geographical features were compared. The geographical characteristics of the mountains that the residents recognize were revealed, and the perception of mountains was defined. Not only did geographical features and vegetation affect the perception of mountains, but also residents' personal experiences were important. As a result, new information for future geographical landscape planning has been obtained.

• 전자통신동향분석
• /
• 제37권1호
• /
• pp.32-41
• /
• 2022

With the development of computing technology, the convergence of ICT with existing traditional industries is being attempted. In particular, with the recent advent of 5G, connectivity with numerous AuT (autonomous Things) in the real world as well as simple mobile terminals has increased. As more devices are deployed in the real world, the need for technology for devices to learn and act autonomously to communicate with humans has begun to emerge. This article introduces "Device to the Edge," a new computing paradigm that enables various devices in smart spaces (e.g., factories, metaverse, shipyards, and city centers) to perform ultra-reliable, low-latency and high-speed processing regardless of the limitations of capability and performance. The proposed technology, referred to as EdgeCPS, can link devices to augmented virtual resources of edge servers to support complex artificial intelligence tasks and ultra-proximity services from low-specification/low-resource devices to high-performance devices.

• 한국벤처창업학회:학술대회논문집
• /
• 한국벤처창업학회 2022년도 춘계학술대회
• /
• pp.157-161
• /
• 2022

Building on the DC interaction model between a parent company and its spin-offs, we examine that a dyadic relationship can be differentiated within the functions of space, motivation, and time. We investigate that these three factors encompassing the parent-spin-off DC relationship can be applicable to both linear(i.e., geographic proximity and low spin-off CEO's salary is positive) and nonlinear(i.e., too much frequency of new spin-off creation is as harmful as too little) effects on determining the performance of spin-off firms. The direction of causality is underpinned by social capital, human capital, and compensation-activation theory rather than by the normal consequences of previous empirical research. Further, our results suggest the overlap between DC and entrepreneurship; namely, spin-off firms create, learn, and exploit opportunities through a reconfiguration of parent DC so that DC establishes itself as a key concept in the entrepreneurship domain.

• Wind and Structures
• /
• 제35권1호
• /
• pp.1-20
• /
• 2022

This research work presents an experimental study's outcomes to reveal the impact of an O-ring on the flow control over a sphere placed in a turbulent boundary layer. The investigation is performed quantitatively and qualitatively using particle image velocimetry (PIV) and dye visualization. The sphere model having a diamater of 42.5 mm is located in a turbulent boundary layer flow over a smooth plate for gap ratios of 0≤G/D≤1.5 at Reynolds number of 5 × 10³. Flow characteristics, including patterns of instantaneous vorticity, streaklines, time-averaged streamlines, velocity vectors, velocity fluctuations, Reynolds stress correlations, and turbulence kinetic energy (), are compared and discussed for a naked sphere and spheres having O-rings. The boundary layer velocity gradient and proximity of the sphere to the flat plate profoundly influence the flow dynamics. At proximity ratios of G/D=0.1 and 0.25, a wall jet is formed between lower side of the sphere and flat plate, and velocity fluctuations increase in regions close to the wall. At G/D=0.25, the jet flow also induces local flow separations on the flat plate. At higher proximity ratios, the velocity gradient of the boundary layer causes asymmetries in the mean flow characteristics and turbulence values in the wake region. It is observed that the O-ring with various placement angles (𝜃) on the sphere has a considerable alteration in the flow structure and turbulence statistics on the wake. At lower placement angles, where the O-ring is closer to the forward stagnation point of the sphere, the flow control performance of the O-ring is limited; however, its impact on the flow separation becomes pronounced as it is moved away from the forward stagnation point. At G/D=1.50 for O-ring diameters of 4.7 (2 mm) and 7 (3 mm) percent of the sphere diameter, the -ring exhibits remarkable flow control at 𝜃=50° and 𝜃=55° before laminar flow separation occurrence on the sphere surface, respectively. This conclusion is yielded from narrowed wakes and reductions in turbulence statistics compared to the naked sphere model. The O-ring with a diameter of 3 mm and placement angle of 50° exhibits the most effective flow control. It decreases, in sequence, streamwise velocity fluctuations and length of wake recovery region by 45% and 40%, respectively, which can be evaluated as source of decrement in drag force.

• International Journal of Computer Science & Network Security
• /
• 제22권11호
• /
• pp.248-254
• /
• 2022

Educational innovations are first created, improved or applied educational, didactic, educative, and managerial systems and their components that significantly improve the results of educational activities. The development of pedagogical technology in the global educational space is conventionally divided into three stages. The role of innovative technologies in Higher School practice is substantiated. Factors of effectiveness of the educational process are highlighted. Technology is defined as a phenomenon and its importance is emphasized, it is indicated that it is a component of human history, a form of expression of intelligence focused on solving important problems of being, a synthesis of the mind and human abilities. The most frequently used technologies in practice are classified. Among the priority educational innovations in higher education institutions, the following are highlighted. Introduction of modular training and a rating system for knowledge control (credit-modular system) into the educational process; distance learning system; computerization of libraries using electronic catalog programs and the creation of a fund of electronic educational and methodological materials; electronic system for managing the activities of an educational institution and the educational process. In the educational process, various innovative pedagogical methods are successfully used, the basis of which is interactivity and maximum proximity to the real professional activity of the future specialist. There are simulation technologies (game and discussion forms of organization); technology "case method" (maximum proximity to reality); video training methodology (maximum proximity to reality); computer modeling; interactive technologies; technologies of collective and group training; situational modeling technologies; technologies for working out discussion issues; project technology; Information Technologies; technologies of differentiated training; text-centric training technology and others.

• 한국경제지리학회지
• /
• 제6권1호
• /
• pp.119-144
• /
• 2003

본 연구는 인터넷과 정보통신기술의 발달이 공간 구조에 미친 영향을 살펴봄으로써 지리적 관점에서 정보통신기술의 영향을 이해하고 전자경제의 시대에 바람직한 공간 활용 전략에 관한 시사점을 제시하고자 하였다. 인터넷의 보급과 정보통신기술의 발달로 원거리의 물리적 공간에 대한 접근 가능성은 높아졌고 전자 경제 시대에 있어 물리적 거리는 더 이상 중요하지 않을 것이라는 주장이 설득력을 얻기도 하였다. 그러나, 적어도 현시점에서, 정보통신기술의 발달이 공간의 불균형을 해소하는 공간 구조로의 발전을 의미하지는 않은 것으로 보인다 이는 우선 전자공간 (사이버 공간)에 대한 접근성이 세계적인 차원에서는 물론 국가 내에서도 지역적으로 불균등하게 나타난다는 점에서 확인할 수 있다. 정보통신기술의 발달에 따라 세계화된 경제 활동에 있어 지역과 국지성의 의미는 더욱 부각되고 있다는 점에도 주목해야 한다. 또한, 전자 경제시대에 있어서도 거래비용 최소화, 지역고유의 사회적 네트워크의 활용, 신뢰성의 확보 등의 이유로 경제활동공간에서 인접성은 여전히 중요하다. 전자상거래활동이 경제공간에 미친 영향도 거리의 영향이 소멸된다거나 공간의 균형성이 획일적으로 나타나는 것은 아니며, 지역과 국지성의 중요성은 간과될 수 없다. 따라서 앞으로 정보화의 진전에 따라 공간적 불균형을 심화시키지 않게 하기 위해서는 주변지역의 정보통신하부구조의 개선은 물론 지식정보화시대에 적합한 인적자원의 개발, 주변지역의 지역혁신체계의 구축이 필요하다.

• 한국조경학회지
• /
• 제48권4호
• /
• pp.19-28
• /
• 2020

도시화로 인한 도시열섬현상(Urban Heat Island)이 심화되면서 도시차원의 열 관리가 중요한 이슈로 다뤄지고, 도시열섬현완화 방안으로 녹지사업과 환경정책이 시행되고 있고, 도시공원 및 녹지와 열의 관계를 분석하는 다수의 연구가 수행되었다. 하지만 열이라는 특성은 다수의 요인이 복합적으로 얽혀있어 선형적 상관관계를 통한 해석에 한계가 있다. 본 연구는 변수요인들이 다양하고 데이터의 양이 방대하여 기존의 통계분석방식으로는 분석하기 어려운 분야에서 강점을 갖는 심층신경망 모형 방법론을 사용하여 여름철 서울지역의 공원 및 녹지의 열섬저감효과를 평가하는 것을 목표로 연구를 진행하였다. 이를 위해서 Landsat 8 인공위성영상을 활용하여 동시간의 광역적인 데이터를 취득하였고, ArcGis 10.7을 이용하여 서울시를 30m×30m 그리드로 격자화하여, 각 격자에 열섬저감을 측정할 수 있는 환경변수를 구축하였다. Python 3.7과 Keras를 이용하여 심층신경망 모형을 생성하여 지표면 온도와 변수 간의 관계를 분석하였다. 분석 결과, 인공신경망 모형은 높은 설명력을 가지는 것을 확인하였다. 또한 일반적인 연구 결과와 마찬가지로 인접 녹지와의 거리가 가까울수록, 공원면적이 커질수록, 공원의 식생활력도가 높을수록 지표면 온도가 낮아짐을 확인하였다. 식생활력도에 의한 냉각효과가 많이 있는 것을 확인하였고, 일부 선행연구에서 녹지에 인접할수록 0.3℃ ~ 2.3℃ 저감될 수 있는 특성이 나타나고, 공원의 크기가 크면 2℃~3℃ 저감효과가 나타난다는 결과를 보이고 있는데, 본 연구결과와 비교해 보면 도출된 효과가 과대평가되었을 가능성을 확인하였다. 본 연구의 결과는 향후 도시열섬현상 완화를 위해 새로운 도시녹지를 조성시 효과적인 녹지 구성을 위한 정보로 활용될 수 있다.