• Journal of the korean society of oceanography
• /
• 제32권2호
• /
• pp.75-84
• /
• 1997

Relation between the length scale and the wall proximity function in the Mellor-Yamada level 2.5 turbulence closure model has been investigated through various experiments using a range of wall proximity functions. The model performance has been evaluated quantitatively by comparing with laboratory data for wind-driven flow (Baines and Knapp, 1965) and for open-channel flows without and with adverse wind action (Tsuruya, 1985). Comparison shows that a symmetric wall proximity function used by Blumberg and Mellor(1987) gives rise to current profiles with better accuracy than asymmetric wall proximity functions considered. It is noted that in modelling homogeneous flows the length scale 1= 0.31${\|}$z${\|}$(1+z/h) can be used with tolerable accuracy.

• 한국ITS학회 논문지
• /
• 제17권1호
• /
• pp.100-113
• /
• 2018

네트워크 수요량 향상 방안 중 가장 주목받고 있는 Proximity Service는 주파수 사용의 효율성 증대를 위해 대부분 주파수 재사용 방식을 사용한다. 그 결과 셀 edge에서 셀룰러 사용자의 Proximity Service 사용자의 셀 간 간섭 문제가 발생한다. 본 논문에서는 eNB에 Proximity Function의 기능과 파라미터를 새롭게 정의하고, ProSe 파라미터와 ProSe user equipment에 대한 정보를 X2 인터페이스를 통해 인접 셀과 교환하게 함으로써 셀 간섭 완화 방안을 제안한다. 우선 ProSe 탐색 과정에서 주파수 센싱을 통해 셀 간 간섭 문제를 일으키지 않을 자원을 할당한다. 그리고 ProSe 통신 상황에서는 ProSe application code, ProSe application QoS, ProSe application ID의 validity timer를 기반으로 간섭을 일으키지 않을 적합한 자원을 재 할당함으로써 셀 간 간섭 문제를 해결한다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제14권2호
• /
• pp.93-111
• /
• 2010

The purpose of this paper is to obtain new complexity results for a second-order cone optimization (SOCO) problem. We define a proximity function for the SOCO by a kernel function. Furthermore we formulate an algorithm for a large-update primal-dual interior-point method (IPM) for the SOCO by using the proximity function and give its complexity analysis, and then we show that the new worst-case iteration bound for the IPM is $O(q\sqrt{N}(logN)^{\frac{q+1}{q}}log{\frac{N}{\epsilon})$, where $q{\geqq}1$.

• 한국정보통신학회논문지
• /
• 제13권10호
• /
• pp.2140-2146
• /
• 2009

태그는 위치정보가 없기 때문에 리더의 식별자를 위치정보로 사용하지만 비연속적인 심볼형 정보이다. 따라서 태그 이동 궤적간의 근접성을 정의하는 것이 어려우며 사용자 질의 처리시 비효율적이다. 본 논문에서는 태그 위치를 표현하기 위하여 인식공간을 정의하고 인식공간 근접성을 제안한다. 인식공간 근접성은 정적 인식공간 근접성과 동적 인식공간 근접성으로 구성되며 이를 이용하여 태그 궤적 간의 근접성을 측정하고 효율적인 색인을 구축할 수 있다. 제안한 태그 이동 궤적 근접성 함수를 평가하기 위해 태그 색인 기법인 IR-tree와 이동체 색인 기법인 $R^*$-tree를 대상으로 성능평가 실험을 수행하였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.310-316
• /
• 2017

The robot proximity and tactile sensors can be categorized into two groups: grip sensors and safety sensors. They have different performance requirements. The safety sensor should have long proximity range and fast response in order to secure enough response time before colliding with ambient objects. As for the tactile sensing function, the safety sensor need to be fast and compliant to mitigate the impact from a collision. In order to meet these requirements, we proposed and demonstrated a compliant integrated safety sensor suitable to human-friendly robots. An ultrasonic proximity sensor and a piezoelectric tactile sensor made of PVDF films have been integrated in a compliant PDMS structure. The implemented sensor demonstrated the maximum proximity range of 35 cm. The directional tolerance for 30 cm detection range was about ${\pm}15^{\circ}$ from the normal axis. The integrated PVDF tactile sensor was able to detect various impacts of up to 20 N in a controlled experimental setup.

• Progress in Superconductivity
• /
• 제12권2호
• /
• pp.110-113
• /
• 2011

We have grown a Nb/Gd bilayer on a$SiO_2$/Si substrate by using a DC magnetron sputtering system, which was fabricated in situ with silicon stencil masks. In order to investigate proximity effect of the Nb/Gd bilayer, we used a planar tunnel junction with an AlOx tunnel barrier by oxidizing the Al ground electrode at the bottom. A $Co_{60}Fe_{40}$ backing of Al was deposited so as to reduce the superconductivity of the Al, ensuring a normal counterelectrode. With a 50-nm-thick Nb layer, we have measured dI/dV (dynamic conductance) by varying the thickness of Gd, which can reveal the density of states (DOS) of the Nb/Gd bilayer as a function of the Gd thickness resulting from the proximity effect of a superconductor/ferromagnet bilayer (S/F). The SF proximity effect in Nb/Gd will be discussed in comparison to our previous results of the CoFe/Nb, Ni/Nb and CuNi/Nb proximity effect; Gd is expected to show different effects since Gd has f-electrons, while CoFe, Ni, and CuNi have only d-electrons. Our studies will focus on the triplet correlation in a superconducting pair.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.380-386
• /
• 2016

This paper presents a compact and low-power on-chip touch sensor and readout circuit using shunt proximity touch sensor and its design scheme. In the proposed touch sensor readout circuit, the touch panel condition depending on the proximity of the finger is directly converted into the corresponding voltage level without additional signal conditioning procedures. Furthermore, the additional circuitry including the comparator and the flip-flop does not consume any static current, which leads to a low-power design scheme. A new prototype touch sensor readout integrated circuit was fabricated using complementally metal oxide silicon (CMOS) $0.18{\mu}m$ technology with core area of $0.032mm^2$ and total current of $125{\mu}A$. Our measurement result shows that an actual 10.4 inches capacitive type touch screen panel (TSP) can detect the finger size from 0 to 1.52 mm, sharply.

• ETRI Journal
• /
• 제27권2호
• /
• pp.188-194
• /
• 2005

We report on the improvement of critical dimension (CD) linearity on a photomask by applying the concept of process proximity correction to a laser lithographic process used for the fabrication of photomasks. Rule-based laser process proximity correction (LPC) was performed using an automated optical proximity correction tool and we obtained dramatic improvement of CD linearity on a photomask. A study on model-based LPC was executed using a two-Gaussian kernel function and we extracted model parameters for the laser lithographic process by fitting the model-predicted CD linearity data with measured ones. Model-predicted bias values of isolated space (I/S), arrayed contact (A/C) and isolated contact (I/C) were in good agreement with those obtained by the nonlinear curve-fitting method used for the rule-based LPC.

• 대한전자공학회논문지SD
• /
• 제47권2호
• /
• pp.32-39
• /
• 2010

기존의 셀 특성 분석은 다중 입력 변화를 고려하지 않고 셀 특성 분석을 수행한다. 다중 입력 변화가 시간적 근접성에 따라 게이트 지연 시간에 미치는 영향이 커지면서, 기존의 셀 특성 분석으로는 정확한 게이트 지연 시간을 예측하기가 어려워지게 되었다. 다중 입력 변화의 영향으로 인하여 게이트 지연 시간이 최대 46%까지 차이가 나는 것을 실험을 통하여 확인하였다. 본 논문에서는 다중 입력 변화의 시간적 근접성으로 인한 지연 시간 변화를 고려한 게이트 지연 시간 모델을 제안하였다. 제안된 모델은 Radial Basis Function (RBF)을 이용하여 지연 시간 변화량을 계산한다. 제안된 방법이 다중 입력 변화가 발생하였을 때, 보다 정확하게 게이트 지연 시간을 예측하는 것을 실험결과를 통하여 확인하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제1권1호
• /
• pp.81-86
• /
• 2001

In this paper, we investigated the modeling of Bank Asset Management System(BAME) based on intelligent agent. To achieve this goal, we introduced several kinds of agents that show intelligent features. BAMS is a user friendly system and adopts fuzzy converting system and fuzzy matching system that returns reasonable similarity matching results. Generation function of the proximity degree is suggested. Fuzzification of investment type categories and feature values are defined, and generation of proximity degree is also derived. An example of bank asset management system is introduced and simulated. Investment type matching utilizing fuzzy measure is tested and it showed quite reasonable similarity matching results.