• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.11a
• /
• pp.135-138
• /
• 2004

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.81-89
• /
• 1996

In this paper, a very efficient CAD algorithm is proposedd where rhodes formulae combined with distributed lowpass prototype filter in order to design the corrugated waveguide harmonic rejection filters accurately. The proposed algorithm resolves effectively the problem of proximity effect without any optimiation or iterative design process by using the internally convexed corrugated structure. A 13-section tapered corrugated lowpass filter has been designed by the proposed algorithm and fabricated. The experimental results are in good agreement with the calculated results.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.78-91
• /
• 2017

In this study, we conducted a comparative study on user's perception and behavior on public system service (PSS) using institutionalism theory and MGA (multi-group analysis) methodology. In particular, this study focuses on how institutional isomorphism is applied to public system services and how MGA can be implemented correctly in a variance based SEM (structural equation model) such as PLS (partial least square). A data set of 496 effective responses was collected from pubic system users and an empirical research was conducted using three segmented models categorized by public proximity theory (public firms = 113, government contractors = 210, private contractors = 173). For rigorous group comparisons, each model was estimated by the same indicators and approaches. PLS-SEM was used in testing research hypotheses, followed by parametric and non-parametric PLS-MGA procedures in testing categorical moderation effects. This study applied novel procedures for testing composite measurement invariance prior to multi-group comparisons. The following main results and implications are drawn : 1) Partial measurement invariance was established. Multi-group analysis can be done by decomposed models although data can not be pooled for one integrated model. 2) Multi-group analysis using various approaches showed that proximity to public sphere moderated some hypothesized paths from quality dimensions to user satisfaction, which means that categorical moderating effects were partially supported. 3) Careful attention should be given to the selection of statistical test methods and the interpretation of the results of multi-group analysis, taking into account the different outcomes of the PLS-MGA test methods and the low statistical power of the moderating effect. It is necessary to use various methods such as comparing the difference in the path coefficient significance and the significance of the path coefficient difference between the groups. 4) Substantial differences in the perceptions and behaviors of PSS users existed according to proximity to public sphere, including the significance of path coefficients, mediation and categorical moderation effects. 5) The paper also provides detailed analysis and implication from a new institutional perspective. This study using a novel and appropriate methodology for performing group comparisons would be useful for researchers interested in comparative studies employing institutionalism theory and PLS-SEM multi-group analysis technique.

• Journal of KIISE:Databases
• /
• v.36 no.3
• /
• pp.198-214
• /
• 2009

Trajectories of RFID tags can be modeled as a line, denoted by tag interval, captured by an RFID reader and indexed in a three-dimensional domain, with the axes being the tag identifier (TID), the location identifier (LID), and the time (TIME). Distribution of tag intervals in the domain space is an important factor for efficient processing of a query for tracing tags and is changed according to arranging coordinates of each domain. Particularly, the arrangement of LIDs in the domain has an effect on the performance of queries retrieving the traces of tags as times goes by because it provides the location information of tags. Therefore, it is necessary to determine the optimal ordering of LIDs in order to perform queries efficiently for retrieving tag intervals from the index. To do this, we propose LID proximity for reordering previously assigned LIDs to new LIDs and define the LID proximity function for storing tag intervals accessed together closely in index nodes when a query is processed. To determine the sequence of LIDs in the domain, we also propose a reordering scheme of LIDs based on LID proximity. Our experiments show that the proposed reordering scheme considerably improves the performance of Queries for tracing tag locations comparing with the previous method of assigning LIDs.

• International Journal of Aeronautical and Space Sciences
• /
• v.1 no.1
• /
• pp.29-35
• /
• 2000

A numerical method to simulate Wing-In-Ground(WIG) effects for the wings moving near ground is developed. The aerodynamic analysis scheme for the wings is based on a compressible non-planar lifting surface panel method and the WIG effect is included by images. The thickness-induced effect is implemented into the lifting surface panel method by using the teardrop theory. The numerical simulation is done for the rectangular wings by varying the ground proximity. The present method is validated by comparing the calculated aerodynamic coefficients with other numerical results and measured data, showing good agreements.

• Journal of the Society of Disaster Information
• /
• v.8 no.1
• /
• pp.27-35
• /
• 2012

The main objective of this paper is to evaluate the field applications and the noise reductions of micro surfacing pavement, which is often used to reduce environmental problems. A traffic noise mechanism was analyzed and a modified mix design method was proposed for nighttime constructions. Results on noise measurements using the statistical pass-by method showed noise reductions of 2.0 to 7.1 dB were observed. In addition, results on noise measurements using the close proximity method demonstrated that noise reductions of 5.6 to 6.7 dB were recorded under vehicle speed of 80km/h. The noise measurements revealed that the close proximity method was more stable than the statistical pass-by method. As a result, the effect of micro surfacing pavement on noise reductions was proved through the research. It is considered that the micro surfacing pavement method could be used as a preventive maintenance method and a comfortable noise reducing pavement technique.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.3
• /
• pp.197-204
• /
• 2012

In this thesis, studied the method to minimize the changes in frequency response and level due to the variation of the distance from the source to the microphone. selecting three microphones (omni directional, cardioid, super cardioid) which are being used generally, frequency responses were measured in accordance with the distance changes. Gotten the difference from the reference as the result of measurement, changed responses for each frequency range were compensated in comparison of the original human vocal source. In low frequency range, the low frequency boost caused by the proximity effect and decrease in accordance with the distance were compensated. The variation in mid-frequency range is comparatively small, however since the mid-range is the most important part of the human vocal signal, were compensated the mid-frequency range in comparison of the reference. The human vocal signal variation in high frequency range is extremely small and the high frequency is compensated close to the original source without difficulty. Understanding the microphone characteristics and compensations, this study showed that the response can be maintain among the change of the distance from the source to the microphone.

• The Journal of the Korea Contents Association
• /
• v.20 no.7
• /
• pp.525-533
• /
• 2020

In recent years, the VR-interactive action contents industry, which utilizes five senses of human bodies, has continued to grow through areas such as games, tourism, movies, performances and exhibitions, but it has reached to breaking point by unrealistic visual elements. Therefore, the purpose of this study is to analyze the effect of each evaluation factor based on visual immersion of interactive type of VR action contents to overcome the limitations. For this study, firstly, prior research is reviewed. Secondly, the evaluation factors of visual immersion of interactive type of VR action contents and hypothesis are to be derived. Research finding is that there is no difference to recognize proximity, three-dimensionality, visibility and immersion by gender. Also, in order to influence visual immersion, it is important that 3D modeling of characters and objects must be sophisticated to be fit in with their surroundings and lighting. This makes user to be confused where they are actually in.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.1
• /
• pp.55-64
• /
• 1997

A wing operating in close proximity to the ground exhibits a reduction in induced drag, which increase the lift/drag ratio. The poert-augmented ram (RAR) phenomenon involves directiing the efflux from forward mounted propulsion ststem under the wings, with the efflux nearly stagnated under the wings. In the present paper, 3 dimentional PAR was numerically studied by solving the Navier-Stokes equations. Pressure distribution and velocity vectors are calculated around the wing surface and the ground. Through the numerical simulation, Cp values and lift/drag ratio are carefully reviewed by changing the height/chord; 0.05, 0.1, 0.3 and 0.8. The shape of model is NACA 0012 with a span/chord ratio of 3.0. According to the numerical results, the relationship between lift/drag and height/chord is fairly reasonable.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.349-354
• /
• 2002

A size of low-voltage conductor cables is determined by the voltage drop of a system, the cable impedance and the cable ampacity based on temperature correction factor in accordance with the condition of cable installation. Therefore, the proper temperature correction factor according to the condition of cable installation should be applied to determining the cable ampacity and also the skin effect and proximity effect, along with the kind and size of conductor and the condition of cable installation, should be properly considered to analyze the proper value of resistance and the reactance of the conductors. This paper addresses the systematic design flow for determining the size of low voltage level conductor cables in calculating the temperature character where error should be minimized in comparison with the general formula and which can be applied in design work for determining the size of conductor cables.