• Title/Summary/Keyword: proximity effect,

Search Result 278, Processing Time 0.021 seconds

Effects of Local Partners' Absorptive Capacity, Equal Equity Ownership of IJVs, and Trust in Foreign Partners on Thai Local Partners' Knowledge Acquisition (현지파트너의 흡수역량, 국제합작기업에 대한 균등지분율 및 해외파트너와의 신뢰가 태국 현지파트너의 지식습득에 미치는 영향)

  • Booranabanyat, Kanisa;Kim, Kwangsoo;Lee, Kwang-Keun
    • International Area Studies Review
    • /
    • v.22 no.4
    • /
    • pp.99-121
    • /
    • 2018
  • This study investigated the factors influencing the knowledge acquisition of Thai local partners from advanced foreign partners through international joint ventures(IJVs). For this purpose, this study initially identified three dimensions of characteristics in the context of IJVs that would influence local partners' knowledge acquisition - a local partners' own characteristic (absorptive capacity), a relationship characteristic with IJVs (proximity to the equal equity ownership), and a relationship characteristic with foreign partners (trust), and examined their effects on local partners' knowledge acquisition. The study further investigated the moderating effects of the tacitness of knowledge on the relationships between those characteristics and knowledge acquisition. Based on the data collected from Thai IJV local partners, results revealed that a local partners' own characteristic, absorptive capacity, and a relationship characteristic with IJVs, proximity to the equal equity ownership, had a strong positive effect on local partners' knowledge acquisition. Results further showed that the tacitness of knowledge strengthened the relationships between absorptive capacity and knowledge acquisition and between trust and knowledge acquisition, but not the relationship between proximity to the equal equity ownership and knowledge acquisition.

The Effect of Customer Contact on Hotel Service Quality (고객접촉이 서비스품질에 미치는 영향)

  • Jung, Moon-Young;Cho, Geon-Seob
    • Korean Business Review
    • /
    • v.19 no.1
    • /
    • pp.193-221
    • /
    • 2006
  • Customer Contact, defined as "the extent of interpersonal interaction between customer and service provider", is recognized as an important contributor to the perception of service quality, which in turn brings positive impacts on customer satisfaction, customer retention and loyalty especially in service contexts. The major purposes of this study are to explore the dimensionality of customer contact construct, to access the influences of customer contact dimensions on service quality dimensions, and to evaluate the relative importance of customer contact dimensions on service quality. Data from 388 customers of hotels at youngdong area in Kangwon-do were analyzed with major findings and their implications for service companies including hotels are as follows. First of all, the results of factor analysis show that customer contact is constructed with two dimensions, namely communication time and contact proximity. Secondly, overall customer contact is found to have positive effects on customers' perception of overall service quality and each dimension of customer contact has significant effects on overall service quality. Third, contact proximity dimension has relatively more important contributors than communication time has on overall service quality and four dimensions of service quality.

  • PDF

Cross-generational Change of /o/ and /u/ in Seoul Korean II: Spectral Interactions in Normalized Vowel Space

  • Kang, Hyunsook;Han, Jeong-Im
    • Phonetics and Speech Sciences
    • /
    • v.5 no.2
    • /
    • pp.33-41
    • /
    • 2013
  • This is a follow-up study on Han and Kang (2013) which argued that the Euclidean distances between /o/ and /u/ in Seoul Korean decreased in the first syllable position as speakers were among younger female speakers but not for male speakers, whereas in the second syllable position both gender groups showed a cross-generational decreasing effect of the Euclidean distance between /o/ and /u/. This study normalized the same data in Han and Kang (2013) which measured 12 speakers (six males and six females) for each Age group and investigated the spectral changes vowels /o/ and /u/ between age and gender, using the log-mean normalized statistical results. This study also examined overlap fraction values generated in SOAM 2D ($F1{\times}F2$) (cf. Wassink, 2006), which may also indicate the proximity of two vowels in question. The results showed that /o/ and /u/ vowels were making closer with /o/ raising for female speakers in $V_1$ and $V_2$ positions but only in the $V_2$ position for male speakers. That is, females led the upward movement of peripheral /o/ vowel, just like the raising of 'e' and 'o' in New York City (Labov, 1991). The results also showed that younger speakers used a rather narrow vowel space for the vowels. This also contributed to the proximity of the vowels /o/ and /u/, resulting in rather large overlap fraction values for younger speakers between these two vowels.

Environmental Impacts of Stone Quarry Exploitation - Aquatic Macroinvertebrate Community and Quarry Locality (수생태계에 미치는 석산개발의 영향 - 생물군집과 입지유형을 중심으로)

  • Lee, Sung Jin;Kim, Myoung Chul;Kim, Ji Young;Ro, Tae Ho
    • Journal of Korean Society on Water Environment
    • /
    • v.21 no.4
    • /
    • pp.368-378
    • /
    • 2005
  • Inorganic matters originated from stone quarries and manufacturing plants could alter the ecological characteristics of adjacent aquatic systems, especially the structure and function of benthic macroinvertebrate community. In such situation, the locality of stone quarry and the quantity of inorganic matters would be important factors that determined the disturbing strength to the benthic macroinvertebrate community. Locality patterns of stone quarries were classified into 3 types in relation to the stream ecosystem; stream-proximity, upstream-inclusion and tributary-inclusion type. In the result of species:abundance analysis, stone quarry B (upstream-inclusion type) showed geometric distribution, while others showed broken-stick distribution pattern. The benthic macroinvertebrate communities closer to stone quarries showed smaller species numbers and standing crops among all types of stone quarries. However the values of species evenness index were not seriously different between controls and directly affected sites. These results indicated that the effect of inorganic disturbance would differ from those of organic pollution that induced the highly dominant state occupied by tolerant species. Number of occurred species, standing crops, community indices and biotic indices indicated that the community of upstream-inclusion type was the most seriously damaged from the inorganic disturbance, and the community would be very simple and unstable. Tributary-inclusion stone quarry heavily damaged to tributary system in biologically, but influence to the main stream seemed to be depended on the scale of main stream. Among 3 types of stone quarry localities, stream-proximity type induced the least damages to benthic macroinvertebrate community, though the degrees of damage were different along with distances between stream and stone quarry.

A Numerical Study on Flows Over Two-Dimensional Simplified Vehicle-Like Body (단순화된 2차원 자동차형 물체주위 유동에 관한 수치해석적 연구)

  • 강신형;이영림;유정열;이택시;김응서
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.13 no.2
    • /
    • pp.277-286
    • /
    • 1989
  • Turbulent flows around two-dimensional vehicle-like bodies in ground proximity are numerically simulated. The Reynolds averaged Navier-Stokes equations with a k-.epsilon. turbulence model are numercally solved, and a body-fitted coordinate system is used. It is shown that the simulation is acceptable in comparison with limitted data measured in the wind-tunnel. According to numerical simulations, drag coefficients are under-estimated and lift coefficients are over-estimated during the model test in the wind-tunnel if the ground is fixed. Such ground effects are reduced as Reynolds number is increased. Reducing the gap between the vehicle and the ground make drag coefficients smaller and lift coefficients larger. The changes in static pressure distributions on the bottom and the rear surface play dominent roles in determination of the drag and the lift of the body in ground proximity. Drag component less than 10% of the total amount is contributed by skin-frictions. When the slant-angle of the body is reduced, the drag shows its minimum value and the lift shows its maximum value at about 22 degree.

Trust Building Level and Linkage's Spatial Characteristics on Logistics & Storage Industry in the City of Busan (부산시 물류창고업의 신뢰형성 수준과 연계의 공간적 특성)

  • Sung, Sin-Je;Lee, Hee-Yul
    • Journal of the Economic Geographical Society of Korea
    • /
    • v.12 no.4
    • /
    • pp.454-476
    • /
    • 2009
  • The purpose of this paper is to examine relation between trust building level and linkages's spatial characteristics on the logistics & storage industry of Busan. As a result, First, long-term & repeated interaction, information sharing & reciprocity, and interdependence & asset specificity have an important effect upon the micro trust which implies the highest trust. Proximity and uncertainty impact on the meso trust, the trust of middle level. Culture, norm, and formal institution of firms affect the macro trust, the lowest level of trust. Second, the micro, the meso, and the macro trusts mainly form in the local scale where spatial proximity is great. The higher the trust building levels become, the more spatial dimensions by linkage expand to national and international dimension, respectively. Third, these results appear more clearly in the output linkage than input linkage, in the service areas-many firm, in the horizontal linkage than vertical linkage, in the advanced evolution phases of firm connection, and in the supply chain management than outsourcing.

  • PDF

D2D Advertisement Dissemination Algorism based on User Proximity and Density (인접성과 사용자 밀집도 정보 기반 D2D 광고 확산 알고리즘)

  • Kim, JunSeon;Lee, Howon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.18 no.10
    • /
    • pp.2403-2408
    • /
    • 2014
  • We designate multiple target areas for the advertisement disseminations in order to resolve the problem of advertisement transmission efficiency degradation due to overlapped device-to-device (D2D) transmissions and unnecessary advertisement transmissions. We here propose an efficient advertisement dissemination algorithm based on pre-selected target areas considering user density. In our proposed algorithm, relay nodes are gradually selected according to the locations of the target areas. We mathematically analyze D2D advertisement coverages of our proposed algorithm, and compare the various simulation results of the proposed algorithm with those of the conventional algorithm according to the several simulation scenarios via intensive simulations.

Estimation of High Resolution Gridded Precipitation Using GIS and PRISM (GIS와 PRISM을 이용한 고해상도 격자형 강수량 추정)

  • Shin, Sung-Chul;Kim, Maeng-Ki;Suh, Myoung-Suk;Rha, Deuk-Kyun;Jang, Dong-Ho;Kim, Chan-Su;Lee, Woo-Seop;Kim, Yeon-Hee
    • Atmosphere
    • /
    • v.18 no.1
    • /
    • pp.71-81
    • /
    • 2008
  • In this study, in order to estimate high resolution precipitation with monthly time scales, Parameter-elevation Regressions on Independent Slopes Model (PRISM) was modified and configured for Korean precipitation based on elevation, distance, topographic facet, and coastal proximity. Applying this statistical downscaling model to Korean precipitation for 5 years from 2001 to 2005, we have compiled monthly grid data with a horizontal resolution of 5-km and evaluated the model using bias, root mean square error (RMSE), and correlation coefficient between the observed and the estimated. Results show that bias, RMSE, and correlation coefficient of the estimated value have a range from 0.2% to 1.0%, 19.6% (June) to 43.9% (January), and 0.73 to 0.84, respectively, indicating that the modified Korean PRISM (K-PRISM) is reasonably worked by weighting factors, i.e., topographic effect and rain shadow effect.

Endplate effect on aerodynamic characteristics of three-dimensional wings in close free surface proximity

  • Jung, Jae Hwan;Kim, Mi Jeong;Yoon, Hyun Sik;Hung, Pham Anh;Chun, Ho Hwan;Park, Dong Woo
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • v.4 no.4
    • /
    • pp.477-487
    • /
    • 2012
  • We investigated the aerodynamic characteristics of a three-dimensional (3D) wing with an endplate in the vicinity of the free surface by solving incompressible Navier-Stokes equations with the turbulence closure model. The endplate causes a blockage effect on the flow, and an additional viscous effect especially near the endplate. These combined effects of the endplate significantly reduce the magnitudes of the velocities under the lower surface of the wing, thereby enhancing aerodynamic performance in terms of the force coefficients. The maximum lift-to-drag ratio of a wing with an endplate is increased 46% compared to that of wing without an endplate at the lowest clearance. The tip vortex of a wing-with-endplate (WWE) moved laterally to a greater extent than that of a wing-without-endplate (WOE). This causes a decrease in the induced drag, resulting in a reduction in the total drag.

A New Accurate Interconnect Delay Model and Its Experiment Verification (연결선에 기인한 시간지연의 정확한 모델 및 실험적 검증)

  • Yoon, Seong-Tae;Eo, Yung-Seon;Shim, Jong-In
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.37 no.9
    • /
    • pp.78-85
    • /
    • 2000
  • A new analytical VLSI interconnect delay model is presented and its accuracy is experimentally verified. In the model, the transmission line parameter variations due to skin effect, proximity effect, and silicon substrate effect are taken into account. That is, the circuit model of the interconnect line that includes these effects is newly developed and analyzed. For the model verification, test patterns combined the coplanar structure with microstrip were designed by using 0.35${\mu}m$ CMOS process technology. It is shown that the accuracy of the model is less than about 10% error.

  • PDF