• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.4
• /
• pp.357-368
• /
• 2003

Time-series CTDT (Conductivity/Temperature/Depth/Transmissivity) were obtained at one point near tidewater glacier of Marian Cove (King George Islands, Antarctica) to present water column properties and SPM (suspended particulate matter) dispersal pattern in relation with tide, current, meteorological data, and SPM concentration. Four layers were divided from the water column characteristics measured in the interval of an hour for about 2 days: 1) cold, fresh, and turbid surface mixed layer between 0-20 m in water depth, 2) warm, saline, and relatively clean Maxwell Bay inflow between 20-40 m in water depth, 3) turbid/cold tongue of subglacial discharges compared with the ambient waters between 40-70 m in water depth, and 4) cold, saline, and clean bottom water beneath 70 m in water depth. Surface plume, turbid freshwater at coastal/cliff area in late summer (early February), had the characteristic temperature and SPM concentration according to morphology, glacial condition, and composition of sediments. The restrict dispersion only over the input source of meltwater discharges was due to calm wether condition. Due to strong wind-induced surface turbulence, fresh and turbid surface plume, englacial upwelling cold water, glacier-contact meltwater, and Maxwell Bay inflow was mixing at ice-proximal zone and the consequent mixed layer deepened at the surface. Large amount of precipitation, the major controlling factor for increasing short-term glacial discharges, was accompanied by the apparent development of subglacial discharge that resulted in the rapid drop of salinity below the mid depth. Although amount of subglacial discharge and englacial upwelling may be large, however, their low SPM concentration would have small influence on bottom deposition of terrigenous sediments.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.9
• /
• pp.1178-1184
• /
• 2006

This study was carried out to investigate the effect of ethanol extract of antler velvet (EAV) on common serum chemistry panels and histopathological change in rats exposed to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD). Administration of TCDD ($50{\mu}g/kg$ body weight) induced significant decrease in platelet count (p<0.01), creatine phosphokinase (CPK, p<0.01), lactatate dehydrogenase (LDH, p<0.05) and glucose (p<0.05) levels and increase in hemoglobin (p<0.05), aspartate aminotransferase (AST, p<0.01), alanine amino transferase (ALT, p<0.05) and lipase activities (p<0.05), and blood urea nitrogen (BUN, p<0.05), triglyceride (p<0.01) and low density lipoptotein cholesterol (LDL-C, p<0.05) levels. However, pretreatment of EAV at daily dose of 20 mg/kg b.w. from 1 wk before TCDD exposure for 5 wks attenuated the abnormality of the overall serum chemistry panels but statistical difference between TE and TA groups was observed only in testicular weight (p<0.01), LDH activity (p<0.05), glucose (p<0.05) and lipase activity (p<0.01). In addition, TCDD induced significant histopathological changes including swelling, fatty metamorphosis, and vacuolar degeneration in liver; edema in proximal and distal convoluted tubules, and glomerulus in kidney; severe atrophy of red purple and appearance of significant number of macrophage in spleen; prominent atrophy and decrease in immune cells in thymus. On the other hand, administration of EAV attenuated histopathological damage induced by TCDD. These results further suggest that administration of EAV attenuates TCDD induced testicular, liver, pancreatic, hematopoietic and nephrotic toxicities in rats.

• Journal of Yeungnam Medical Science
• /
• v.6 no.1
• /
• pp.151-163
• /
• 1989

Nerve conduction studies help delineate the extent and distribution of the neural lesion. The nerve conduction was studied on upper(median, ulnar and radial nerves) and lower(personal, posterior tibial and sural nerves) extremities in 83 healthy subjects 23 to 66 years of age. and normal values were established(Table 1). The mean motor terminal latency (TL) were : median. 3.6(${\pm}0.6$)milliseconds ; ulnar. 2.9(${\pm}0.5$) milliseconds ; radial nerve. 2.3(${\pm}0.4$) milliseconds. Mean motor nerve conduction velocity(MNCV) along distal and proximal segments: median. 61.2(${\pm}9.1$) (W-E) and 57.8(${\pm}13.2$) (E-Ax) meters per second ; ulnar. 63.7(${\pm}9.1$) (W-E) and 50.(${\pm}10.0$) meters per second. Mean sensory nerve conduction velocity(SNCV) : median. 34.7(${\pm}6.7$) (F-W), 63.7(${\pm}7.1$) (W-E) and 62.8(${\pm}12.3$) (E-Ax)meters per second ; ulnar. 38.0(${\pm}6.7$)(F-W), 63.4(${\pm}7.5$) (W-E) and 57.0(${\pm}10.1$) (E-Ax)meters per second ; radial, 45.3(${\pm}6.8$) (F-W) and 64.2(${\pm}11.0$) (W-E) meters per second ; sural nerve, 43.4(${\pm}6.1$) meters per second. The amplitudes of action potential and H-reflex were also standardized. Mean H latency was 28.4(${\pm}3.2$) milliseconds. And. the fundamental principles, several factors altering the rate of nerve conduction and clinical application of nerve stimulation techniques were reviewed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.342-349
• /
• 2019

Purpose: The purpose of this study was to retrospectively investigate the survival and success rate of implant-supported fixed prosthesis according to the materials in the posterior area. Other purposes were to observe the complications and evaluate the factors affecting failure. Materials and methods: Patients who had been restored implant prosthesis in the posterior area by the same prosthodontist in the department of prosthodontics, dental hospital, Chonbuk National University, in the period from January 2011 to June 2018 were selected for the study. The patient's sex, age, material, location, type of prosthesis and complications were examined using medical records. The KaplanMeier method was used to analyze the survival and success rate. The Log-rank test was conducted to compare the differences between the groups. Cox proportional hazards model was used to assess the association between potential risk factors and success rate. Results: A total of 364 implants were observed in 245 patients, with an average follow-up of 17.1 months. A total of 5 implant prostheses failed and were removed, and the 3 and 5 year cumulative survival rate of all implant prostheses were 97.5 and 91.0, respectively. The 3 and 5 year cumulative success rate of all implant prostheses were 61.1% and 32.9%, respectively. Material, sex, age, location and type of prosthesis did not affect success rate (P>.05). Complications occurred in the order of proximal contact loss (53 cases), retention loss (17 cases), peri-implant mucositis (12 cases), infraocclusion (4 cases) and so on. Conclusion: Considering a high cumulative survival rate of implant-supported fixed prostheses, regardless of the materials, implant restored in posterior area can be considered as a reliable treatment to tooth replacement. However, regular inspections and, if necessary, repairs and adjustments are very important because of the frequent occurrence of complications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.303-312
• /
• 2019

Oxidative stress in kidneys can precede the development of chronic renal injury. We investigated the antioxidative effect of membrane-free stem cell extract (MFSCE) from adipose tissue in LLC-$PK_1$ renal proximal tubule cells. Treatment of LLC-$PK_1$ cells with MFSCE showed the up-regulation of heme-oxygenase-1, thioredoxin reductase 1, and NADPH quinine oxidoreductase-1 protein expressions, which are proteins related with antioxidative activities. When oxidative stress was induced by 3-morpholinosydnonimine (SIN-1), cell viability was decreased, indicating that LLC-$PK_1$ cells were damaged by SIN-1. However, MFSCE significantly elevated cell viability from 58.84% to 64.43% at the concentration of $2.5{\mu}g/mL$ in oxidative stress-induced LLC-$PK_1$ cells. Furthermore, MFSCE ameliorated inflammation and apoptosis in SIN-1-treated LLC-$PK_1$ cells by modulating protein expressions. Inducible nitric oxide synthase and cyclooxygenase-2 protein expressions were down-regulated when LLC-$PK_1$ cells were treated with MFSCE. Apoptosis-related proteins, including B-cell lymphoma-2-associated X protein/B-cell lymphoma-2 ratio, cleaved caspase-3, and cleaved-poly (ADP-ribose) polymerase, were also down-regulated. It indicated that MFSCE protected apoptosis against oxidative stress in LLC-$PK_1$ cells. Taken together, these results suggested that MFSCE had a protective effect against SIN-1-induced oxidative stress in LLC-$PK_1$ cells. Therefore, MFSCE could be a promising therapeutic agent for oxidative stress-induced renal injury.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.297-305
• /
• 2018

Purpose: This study aimed to analyze stress distribution and maximum von Mises stress generated in intracoronal restorations and in tooth structures of mandibular molars with various types of cavity designs and materials. Materials and Methods: Three-dimensional solid models of mandible molar such as O inlay cavity with composite and gold (OR-C, OG-C), MO inlay cavity with composite and gold (MR-C, MG-C), and minimal invasive cavity on occlusal and proximal surfaces (OR-M, MR-M) were designed. To simulate masticatory force, static axial load with total force of 200 N was applied on the tooth at 10 occlusal contact points. A finite element analysis was performed to predict stress distribution generated by occlusal loading. Results: Restorations with minimal cavity design generated significantly lower values of von Mises stress (OR-M model: 26.8 MPa; MR-M model: 72.7 MPa) compared to those with conventional cavity design (341.9 MPa to 397.2 MPa). In tooth structure, magnitudes of maximum von Mises stresses were similar among models with conventional design (372.8 - 412.9 MPa) and models with minimal cavity design (361.1 - 384.4 MPa). Conclusion: Minimal invasive models generated smaller maximum von Mises stresses within restorations. Within the enamel, similar maximum von Mises stresses were observed for models with minimal cavity design and those with conventional design.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.64-75
• /
• 2019

The purpose of this study was to obtain instructions for size selection of prefabricated crown and tooth reduction by 3-dimensional analysis of the size and shape of the maxillary primary central and lateral incisors and prefabricated crowns (celluloid strip, resin veneered stainless steel, and zirconia crowns). The maxillary primary central and lateral incisors of 300 Korean children was scanned with three types of prefabricated crown to create standard three-dimensional tooth models and prefabricated crowns. The shapes of the prefabricated crowns and natural teeth were compared according to four parameters (mesio-distal width, height, labio-palatal width, and labial surface curvature coefficient) and calculated the amount of tooth reduction required for each prefabricated crown. The size 2 resin veneered stainless steel crown, size 1 zirconia crown, and size 2 celluloid strip crown were most similar in shape to the primary central incisor. The size 3 rein veneered stainless steel crown, size 2 zirconia crown, and size 3 celluloid strip crown were most similar to the primary lateral incisor. The amount of tooth reduction was similar in both maxillary primary central and lateral incisors. The incisal reduction was greatest for the zirconia crown. At the proximal surface, the zirconia and celluloid strip crowns required a similar amount of tooth reduction, but more than the resin veneered stainless steel crown. The labial surface reduction was greatest for the zirconia crown. The degree of lingual surface reduction was not significant among the three prefabricated crowns. Among the assessment parameters, mesio-distal crown width was the most important for choosing a prefabricated crown closest to the actual size of the natural crown.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.4
• /
• pp.281-293
• /
• 2020

An anterior cruciate ligament (ACL) reconstruction is one of the most frequent surgical procedures in the knee joint, but despite the better understanding of anatomy and biomechanics, surgical reconstruction procedures still fail to restore rotational stability in 7%-16% of patients. Hence, many studies have attempted to identify the factors for rotational laxity, including the anterolateral ligament (ALL), but still showed controversies. Descriptions of the ALL anatomy are also confused by overlapping nomenclature, but it is usually known as a distinctive fiber running in an anteroinferior and oblique direction from the lateral epicondyle of the femur to the proximal anterolateral tibia, between the fibular head and Gerdy's tubercle. The importance of the ALL as a secondary restraint in the knee has been emphasized for successful ACL reconstructions that can restore rotational stability, but there is still some controversy. Some studies reported that the ALL could be a restraint to the tibial rotation, but not to anterior tibial translation. On the other hand, some studies reported that the role of ALL in rotational stability would be limited as a secondary structure because it bears loads only beyond normal biomechanical motion. The diagnosis of an ALL injury can be performed by a physical examination, radiology examination, and magnetic resonance imaging, but it should be assessed using a multimodal approach. Recently, ALL was considered one of the anterolateral complex structures, as well as the Kaplan fiber in the iliotibial band. Many studies have introduced many indications and treatment options, but there is still some debate. The treatment methods are introduced mainly as ALL reconstructions or lateral extra-articular tenodesis, which can achieve additional benefit to the knee stability. Further studies will be needed on the indications and proper surgical methods of ALL treatment.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.1
• /
• pp.54-61
• /
• 2020

Purpose: Brown tumor is a tumor-like disease that can occur as a linked disease of hyperparathyroidism which can causes osteoporosis, osteitis fibrosa cystica, pathologic fractures. Brown tumor has been reported as a case report, but there is no comprehensive report on the exact diagnosis and principle of management for osseous lesion. The purpose of this study is to report the treatment and results of osseous lesions through 5 cases. Materials and Methods: From February 2004 to May 2015, five cases of Brown tumor were diagnosed in Chosun University Hospital and Chonnam National University Hospital orthopedic department. Medical records and radiographs were reviewed retrospectively. Parathyroid tumors were surgically removed, and surgical treatment and observation were performed for orthopedic osseous lesions. Results: The mean length of the long axis of the symptomatic osseous lesion was 6.2 cm (4.5-9.0 cm). An average of 7.6 (range, 3 to 14) of high uptake osseous lesion showed in whole body bone scan. The absolute value, T-score and Z-score of the vertebrae and proximal femur were adequate for diagnosis of osteoporosis using dual energy X-ray absorptiometry bone mineral density at diagnosis and recovered to normal at the last follow-up. In laboratory tests, serum concentrations of total calcium, ionized calcium, inorganic phosphorus, serum alkaline phosphatase, and parathyroid hormone were helpful to diagnosis and normalized upon successful removal of parathyroid adenoma or cancer. Conclusion: For accurate diagnosis of Brown tumor, it should be accompanied by systemic examination as well as clinical symptoms, laboratory tests and radiologic examination for osseous lesions. And a good prognosis can be expected if the hyperparathyroidism is treated together with the comprehensive treatment of osseous lesions.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.567-574
• /
• 2022

Coronary artery disease (CAD) and atrial fibrillation (AF) are known to share many risk factors. In particular, in the case of acute coronary syndrome, it may be difficult to clearly determine the diameter of the vessel due to complete occlusion of the vessel and thrombus. Thus, the relationship between the diameter of the coronary arteries was evaluated to be used as a reference data before the treatment of coronary arteries and drug selection in patients with AF. From January 2020 to August 2022, images of coronary angiography (CAG) with AF and normal sinus rhythm (NSR) on electrocardiography were target. In both subjects, images of normal coronary artery without lesions as a result of CAG were used. For all vessels, the diameters of the vessels were measured by dividing them into proximal, middle, and distal parts, and the measured diameters were divided by the average for evaluation. As a result of analyzing the left anterior descending artery diameter, the vessel diameter of the AF patient was 2.24±0.26 mm, which was smaller than that of the NSR patient, 2.86±0.38 mm, and was statistically significant. (p<0.001) As a result of analyzing the left circumflex artery diameter, the vessel diameter of the AF patient was 2.34±0.28 mm, which was smaller than the vessel diameter of the NSR patient, 2.87±0.29 mm, and was statistically significant. (p<0.001) As a result of analyzing the diameter of the right coronary artery, the vessel diameter of the AF patient was 2.68±0.5 mm, which was smaller than the vessel diameter of the NSR patient, 3.35±0.4 mm, and was statistically significant. (p<0.001) Considering that the coronary artery size of AF patients is significantly smaller than the coronary vessel size of NSR patients, it is considered as a useful study to be used as a reference for evaluating coronary artery diameter when the arrhythmia is AF. In particular, it is considered to be a study that can be helpful in diagnosing lesions, using drugs before and after surgery, and choosing to use auxiliary devices such as intravascular ultrasound.