• Applied Biological Chemistry
• /
• 제43권1호
• /
• pp.46-51
• /
• 2000

망초(Conyza bonariensis)에서 제초제 paraquat 저항성을 구명하기 위해 paraquat가 생성하는 superoxide 라디칼과 과산화수소 등의 유해 산소 물질을 제거하는 데에 관련된 효소의 활성을 저항성 종과 감수성 종의 망초에서 측정하였다. 경작지 부근에 자라는 망초는 비경작지에 자라는 망초에 비해 paraquat 저항성이 강하였다. 국내에서 paraquat를 자주 살포하는 지역에서 저항성 종의 망초가 출현하고 있음을 처음으로 보고한다. 저항성 종의 superoxide dismutase의 활성, ascorbate peroxidase의 활성, 그리고 glutathione reductase의 활성은 감수성의 그것에 비해 각각 약 20%, 44%, 그리고 64% 높게 나타났다. 이러한 결과로부터 paraquat에 대한 망초의 저항성은 superoxide dismutase, ascorbate peroxidase, 그리고 glutathione reductase 등으로 구성된 효소의 유해 산소 물질을 제거하는 효율성에 부분적으로 달려 있을 수 있다고 사료된다.

• 한국의류산업학회지
• /
• 제25권2호
• /
• pp.248-254
• /
• 2023

This study aims to measure the skin rigidity of different facial areas among Koreans and propose guidelines for each area's skin rigidity that can be applied with a facial robot for testing respiratory protective devices. The facial skin rigidity of 40 participants, which included 20 men and 20 women, aged 20 to 50, was analyzed. The rigidity measurement was conducted in 13 facial areas, including six areas in contact with the mask and seven non-contact areas, by referring to the facial measurement guidelines of Size Korea. The facial rigidity was measured using the Durometer RX-1600-OO while in a supine position. The measurement procedure involved contacting the durometer vertically with the reference point, repeating the measurement of the same area five times, and using the average of three values whose variability was between 0.4 and 4.2 Shore OO. The rigidity data analysis used precision analysis, descriptive statistics analysis, and mixed-effect ANOVA. The analysis confirmed the rigidity of the 13 measurement areas, with the highest rigidity of the face being at the nose and forehead points, with values of 51.2 and 50.8, respectively, and the lowest rigidity being at the chin and center of the cheek points, with values of 19.2 and 20.7, respectively. Significant differences between gender groups were observed in four areas: the tip of the nose, the point below the chin, the area below the lower jaw, and the inner concha.

• 동의생리병리학회지
• /
• 제21권1호
• /
• pp.214-218
• /
• 2007

The water extracts of Samultang (Samul) has been used for treatment of ischemic heart and brain damage in Oriental traditional medicine. However, little is known about the mechanism by which the water extract of Samul rescues cells from oxidative damages in cisplatin-induced ototoxicity. Cisplatin is a widely used chemotherapeutic agent that is also highly ototoxic. This study was designed to investigate the protective effects of Samul on ciplatin-induced ototoxicity in HEI-OC1 auditory cells and organ of Corti explant culture. Cisplatin markedly decreased the viability of HEI-OC1 auditory cells. However, treatment of HEI-OC1 cells with Samul significantly reduced cisplatin-induced cell death and apoptotic characteristics through reduction of intracellular peroxide generation. Cisplatin induced cytotoxicity in isolated and cultured hair cell progenitors from postnatal rat cochleae. These progenitor cells are isolated from the lesser epithelial ridge (LER, or outer spiral sulcus cell) area of pre-plated neonatal rat cochlear segments. However, Samul completely protected the morphological changes of organ of Corti and LER. Taken together, these data suggest that the protective effects of the water extracts of Samul against cisplatin may be mediated by the reduction of intracellular peroxide generation.

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.381-386
• /
• 2012

To study encapsulation method for large-area organic light emitting diodes (OLEDs), red emitting OLEDs were fabricated, on which $Alq_3$ as organic buffer layer and LiF and Al as inorganic protective layers were deposited to protect the damage of OLED by epoxy. And then the OLEDs were attached to flat glass by printing method using epoxy. The basic structure of OLED doped with rubrene of 1 vol.% as emitting layer is ITO(150 nm) / 2-TNATA(50 nm) / ${\alpha}$-NPD(30 nm) / $Alq_3$:Rubrene(30 nm) / $Alq_3$(30 nm) / LiF(0.7 nm) / Al(100 nm). In case of depositing $Alq_3$, LiF and Al and then attaching of flat glass onto OLED, current density, luminance, efficiency and driving voltage were not changed and lifetime was increased according to thickness of Al as inorganic protective layers. The lifetime of OLED/$Alq_3$/LiF/Al_4/glass structure was 139 hours increased by 15.8 times more than bare OLED of 8.8 hours and 1.6 times more than edge sealed OLED of 54.5 hours.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.683-689
• /
• 2008

The purpose of this study was to investigate physiological responses such as rectal temperature, skin temperature, micro climate, sweat rate and subjective sensations using cold protective clothing with five different clo value. The clo value was measured by thermal manikin in windless condition. Healthy five 20's males volunteered as subjects for wearing trial experiment. The climate chamber was controlled at $50^{\circ}C$, 65% RH. The experiment consisted of repeated exercise and recovery periods. We found that the higher clo value has, the higher mean skin temperature, micro climate and sweat rate show. They felt warm and wet with higher insulation clothing. Thermal comfort increased in the last recovery period after exercise. There was significant difference between five cold protective clothing. In correlation analysis of clo value, it showed that correlation coefficient(r) values were more than 0.8. Therefore, in terms of clothing insulation, we found that correlation between thermal manikin experiment and wearing trial experiment was high. Clothing insulation could be variable according to many factors such as body movement, covering area, clothing gap, layering and design. Considering the body movement, we thought that insulation measurement need to carry out both thermal manikin experiment and wearing trial experiment.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.138-143
• /
• 2007

The leading-cab (high energy absorption area) of rolling stock directly is impacted on the frontal crash unlike other cabs. Thus, leading-cab has a structurally complex shape to solve getting concentrated loads. However, in order to enhance structural performance and to achieve the weight reduction of cab, changing the sizes and adjusting the distance of members do not take an effective result. Therefore, in design phase, to find the material arrangement which helps structural capacity be better should be done. This research applies the topology optimization to concept design of protective shell frame on strategy of crush energy absorption with considering pressure and vertical loads acting on the principal part of leading-cab. In this research, topology optimization method focuses on structural design, and which yields optimal material arrangement under given loads and boundary conditions using density method which has the density of material as design variables. Finally, this research presents optimal material arrangement and structure of protective shell frame on given loads with applying topology optimization.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.344-349
• /
• 2015

An interconnect is the key component of solid oxide fuel cells that electrically connects unit cells and separates fuel from oxidant in the adjoining cells. To improve their surface stability in high-temperature oxidizing environments, metallic interconnects are usually coated with conductive oxides. In this study, lanthanum nickelates ($LaNiO_3$) with a perovskite structure are synthesized and applied as protective coatings on a metallic interconnect (Crofer 22 APU). The partial substitution of Co, Cu, and Fe for Ni improves electrical conductivity as well as thermal expansion match with the Crofer interconnect. The protective perovskite layers are fabricated on the interconnects by a slurry coating process combined with optimized heat-treatment. The perovskite-coated interconnects show area-specific resistances as low as $16.5-37.5m{\Omega}{\cdot}cm^2$ at $800^{\circ}C$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.73-73
• /
• 1999

A large area negative metal ion beam source is developed. Kinetic ion beam of the incident metal ions yields a whole nucleation and growth phenomena compared to the conventional thin film deposition processes. At the initial deposition step one can engineer the surface and interface by tuning the energy of the incident metal ion beams. Smoothness and shallow implantation can be tailored according to the desired application process. Surface chemistry and nucleation process is also controlled by the energy of the direct metal ion beams. Each individual metal ion beams with specific energy undergoes super-thermodynamic reactions and nucleation. degree of formation of tetrahedral Sp3 carbon films and beta-carbon nitride directly depends on the energy of the ion beams. Grain size and formation of polycrystalline Si, at temperatures lower than 500deg. C is obtained and controlled by the energy of the incident Si-ion beams. The large area metal ion source combines the advantages of those magnetron sputter and SKIONs prior cesium activated metal ion source. The ion beam source produces uniform amorphous diamond films over 6 diameter. The films are now investigated for applications such as field emission display emitter materials, protective coatings for computer hard disk and head, and other protective optical coatings. The performance of the ion beam source and recent applications will be presented.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2005년도 춘계 종합학술대회 논문집
• /
• pp.208-214
• /
• 2005

프랑스는 문화영역에서 강력한 보호정책을 채택하고 있는 국가 중 하나다. '문화적 다양성' 혹은 '문화적 예외'라는 원칙을 내걸고 프랑스는 미국의 '세계화' 정책에 맞서고 있다. 시청각 콘텐츠 영역에서도 마찬가지로 프랑스는 헐리우드 영화의 침범에 맞서 자신의 영화적 영역을 보호하기 위해 보호정책을 채택하고 있다. 프랑스 정부의 다양한 지원 가운데서, 특히 우리는 신인감독에 대한 지원체계와 이 체계 안에서 CNC의 역할에 패해 주목한다. 따라서 이글에서는 정부기관으로서 CNC가 어떻게 프랑스의 시청각영역에 대해 영향력을 행사하는지를 살펴보고, 어떤 과정을 통해 신인감독들의 작업에 실질적인 지원을 제공하는 지를 살펴볼 것이다.

• 터널과지하공간
• /
• 제15권1호
• /
• pp.71-79
• /
• 2005

지표로부터 터널까지의 토피가 얇고 지반이 풍화토 혹은 풍화암으로 연약한 곳에서 두 터널이 교차되도록 굴찰할 때 교차부의 역학적 안정성을 계측으로 확인하였다. 터널의 시공방법은 주로 12 m의 강관 다단그라우팅 3열로 막장전방을 선보강한 후 터널상반부를 굴착하였고 두 터널의 교차부는 자천공 록볼트로 추가 보강하였다. 터널 굴착 후 교차부 주변 지반의 변위가 수렴되어 역학적인 안정을 확인 할 수 있었다. 최종적으로 수렴된 변위는 천단침하와 내공변위가 각각 약 6-7 mm. 약 5 mm로 터널의 심도와 연약한 지반조건을 고려할 때 작은 값이었다. 따라서 길이 12 m의 강관 다단그라우팅 3열로 막장전방을 보강한 후 터널 교차부 주변을 굴착한 것은 변위를 억제하고 터널의 안정화에 효과적인 것으로 분석되었다.