• KIEAE Journal
• /
• 제8권1호
• /
• pp.93-98
• /
• 2008

As high rise buildings and large span spatial structures are constructed, new composite members and construction techniques are continuously developed. Wide flange steel beam can be easily constructed but the fire proofing protection is necessary and the cost is high. Nowadays environmental pollution of structures is becoming a big issue. The material of fire proofing protection is not allowed to use for structural members in several countries because it cab be a cause of environment pollution. Composite beam is a new hybrid beam system which is not needed a fire proofing protection process. Composite beam has better construction capacity than that of RC system and has more economic advantages than that of wide flange steel beam. In this paper, structural design guide lines of composite beam were provided to apply design and construction.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권1호
• /
• pp.49-57
• /
• 2013

해양플랜트의 설계는 위험요인을 정량적 위험성평가를 통해 계량화하여 그 결과를 설계에 반영하는 것이 일반화되어 있다. 대표적인 위험요소인 화재 위험에 대해서도 이는 마찬가지다. 계량화된 화재 위험에 대해 작업자들이 탈출하는 동안 안전설비의 기능을 유지하고 발생된 화재가 더 크게 전이(escalation)되는 것을 방지하는 것이 방화대책의 궁극적인 목적이다. 본 논문에서는 대표적인 방화대책인 능동방화대책과 수동방화대책의 적용사례를 살펴보고 수동방화대책의 설계기법들을 소개한다. 수동방화대책은 효과적인 방화기법이지만 초기 투자비가 많이 소요되고 운용과 유지보수에 애로사항이 크다. 따라서, 최근 들어 발주자들은 수동방화대책을 최적화하도록 해양플랜트 설계자에게 요청하는 추세이다.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2919-2926
• /
• 2023

In this paper, rare earth element (REE)/polyester composites were designed with lanthanum oxide, gadolinium oxide, and lutetium oxide as ray shielding agents, and polyethylene terephthalate (PET) as the base. Monte Carlo simulation was carried out using FLUKA software. We found that the radiation protection performance of the composite is affected by the type and amount of REE; a higher amount of REE equated to a better radiation protection performance of the composite. When the thickness of the composite and total thickness of the REE is constant, the number of superimposed layers inside the composite does not affect its shielding performance. Compared with a single-type REE/PET composite, a mixed-type REE/PET composite has a wider range of γ-ray absorption and better radiation protection performance. When the mass ratio of PET to REE is 2:8 and different types of REE are mixed with equal mass, several 0.2 cm-thick mixed-type REE/PET composites can shield >70% of 60 and 80 KeV γ-rays.

• 한국화재소방학회논문지
• /
• 제25권4호
• /
• pp.42-47
• /
• 2011

본 연구에서는 환기 및 소방용 복합댐퍼의 개발을 위한 기초 연구의 일환으로 복합댐퍼의 설계인자에 관한 연구를 수행하였다. 본 연구는 복합댐퍼의 프로세스와 운동 메커니즘, 기구 모델링을 바탕으로 복합댐퍼의 설계 및 해석이론을 제시하였고, 설계 및 해석이론을 바탕으로 한 운동해석 시뮬레이션을 통해 복합댐퍼의 각 요소를 설계할 수 있는 엔지니어링 데이터 구축과 원천기술을 확립하였다. 따라서 본 연구를 통해 환기 및 소방용 복합댐퍼 개발에 폭넓게 응용할 수 있는 결과를 얻었다. 본 연구를 바탕으로 복합댐퍼가 개발되면 환기풍도로부터 유입되는 연기제어와 기술적 대책을 마련할 수 있을 것으로 본다.

• Journal of Information Technology Applications and Management
• /
• 제14권3호
• /
• pp.151-168
• /
• 2007

RFID is an emerging technology and rapidly applied to various industries due to its high-tech characteristic and convenience. Although RFID provides valuable benefits. it might also generate serious privacy problems. Previous studies show that privacy issues should be incorporated in developing RFID systems and more detailed privacy protection methods. However. they just provide basic concept, rough guideline. and simple architecture about RFID privacy protection. Industry needs more structured framework and detailed systematic process to incorporate privacy issues into the RFID system. The purpose of this paper is to develop a framework and detailed process design of RFID privacy protection issues in retail industries. A framework is developed based on individual sensitivity concept, RFID contents, and interface with EPC global standard. Case study is applied to validate the framework and it turns out to be useful. It is expected that the proposed framework and process design would provide more systematic guide lines to solving RFID privacy problems.

• 한국항행학회논문지
• /
• 제23권5호
• /
• pp.444-451
• /
• 2019

본 논문에서는 항공기 탑재장비의 RS-170a 영상 신호에 대한 EMI 및 낙뢰 간접영향에 대한 보호 대책을 설명한다. 항공기 탑재장비는 외부 환경으로부터 발생하는 전자파 간섭과 항공기 낙뢰 피격시 발생하는 낙뢰 간접영향으로 부터 발생하는 서지 전압에 의해 장비의 오작동이나 물리적 손상의 위험에 노출되어있다. 이러한 위험으로부터 장비를 보호하기 위해서는 전자파 간섭 및 간접 낙뢰 효과에 대한 보호 설계를 장비에 적용해야 하는데, 신호의 전압이 낮고 주파수 대역이 높을수록 보호 회로에 의한 신호 왜곡이 문제가 된다. 따라서 본 논문에서는 EMI 및 낙뢰 간접영향에 대한 일반적인 보호 설계 방법과, RS-170a 신호를 기준으로 보호 설계 적용에 따른 영상 신호 왜곡 현상을 최소화하기 위한 고려 사항을 소개한다. 그리고 이 과정에서 논한 고려 사항을 적용해 실제 장비 설계를 개선한 사례를 소개한다.

• 한국산업융합학회 논문집
• /
• 제4권1호
• /
• pp.51-60
• /
• 2001

This study examines the effects of removal of the sediment protection weir at Taehwa river mouth on hydraulic and around river environment considering the fact that the effects of the sediment protection weir which is installed to protect water level drop of Ulsan harbor caused by sediments according to flood in Taehwa river, Dong-chun, and so forth may add water quality contamination by flow stagnance in normal and drought period and accumulation of pollutants. The result is as follows. First, it is estimated from the examination of variation characteristics water depth and level for Taehwa river before and after removal of the sediment protection weir that about 0.01m of water depth down according to removal of the sediment protection weir occurs when low flow runs between the sediment protection weir which is located about 2.3km away from the estuary and Samho-gyo which is about 9.0km away from the sediment protection weir, and about 0.01~0.56m(directly upstream point of the sediment protection weir 0.56m, Myongchon-gyo 0.14m, Ulsan-gyo 0.03m, and Taehwa-gyo 0.02m) downs when design flood flows between the sediment protection weir and the upstream of Taehwa-gyo which is 10km away from the sediment protection weir. Therefore, it is thought that variation of hydraulic characteristics of water depth down and so on according to removal of the sediment protection weir is slight because water depth variation is only about 1cm between directly upstream point of the sediment protection weir and Samho-gyo. Next, it is estimated from the examination of variation characteristics of flow velocity for Taehwa river before and after removal of the sediment protection weir that about 0.0lm/s of flow velocity increase occurs between the directly upstream point of the sediment protection weir which is about 2.4km away from the estuary and the directly upstream point of Samho-gyo when low flow runs, and about 0.01~0.44m/s increases between the sediment protection weir and Samho-gyo when design flood flows. Therefore, riverbed erosion by the increased flow velocity is concerned but it is thought that the concern about riverbed erosion is not great because the mean velocity is about 0.07~1.36m/s when low flow runs, and about 1.02~2.41m/s when design flood flows for the sector which experiences the flow velocity variation.

• 전자공학회논문지A
• /
• 제30A권12호
• /
• pp.88-97
• /
• 1993

Electrostatic Discharge(ESD) is one of the major reliability, issues for today's VLSI production. Since the gate oxide with a thickness of 100~300$\AA$ is vulnerable to several thousand volt of ESD surge, it is necessary to control the ESD events and design an efficient protection circuit. In this paper, physical mechanism of the catastrophic ESD damage is investigated by transient analysis based upon Human Body Model(HBM). Using two-dimensional electrothermal simulator, we study the failure mechanism of the output protection devices by ESD and discuss the design issues for the optimun protection network.

• 국제초고층학회논문집
• /
• 제2권1호
• /
• pp.31-38
• /
• 2013

The movement towards sustainable building design can result in unique fire protection challenges and concerns, especially with super tall buildings in relationship to traditional prescriptive code compliance. Different countries haves different code requirements as well as local best practices and may cause conflict with the design features when designing green buildings. These include, but not limited to green roofs, sprinkler water quality and testing, fire department access and areas of refuge with direct or indirect impact by the perspective code compliance. The solutions to these prescriptive code challenges and fire safety concerns can range from simple alternatives to more detailed engineering performance-based design analyses with good solid practice.

• 산업공학
• /
• 제23권1호
• /
• pp.68-77
• /
• 2010

Digital reactor protection system which consists of many identical modules, is fault- tolerant to provide high safety. The modules themselves including DSP(digital signal processing) card are also fault-tolerant in nature. This paper assesses the safety for being-designed digital reactor protection system of 2-out-of-4 G structure with lockout. Some interesting design alternatives are compared. Fault tree analysis for assessing system safety is performed by Relex software. The selected reactor protection system fully satisfies EPRIURD stipulation of mean failure time of 50 years.