• Journal of the Society of Disaster Information
• /
• v.13 no.3
• /
• pp.398-404
• /
• 2017

In this study, the field investigation was carried out in an area damaged by flood, which recently occurred in Chungcheong region, in order to establish a disaster safety village in a rural area. In addition, the history and characteristics of a village in Garisan-ri, Inje-gun, Gangwon-do that experienced loss of life and property caused by flood in 2006 were analyzed through monitoring. The village was restored and has been operated as a disaster prevention experience village for the purpose of disaster prevention, and its structural and non-structural status was monitored during the analysis. Based on the results, application measures for establishing a disaster safety village in a rural area in future were examined. At the time of restoring food damage, the residents' participation was actively reflected in the process of establishing the disaster prevention experience village in Garisan-ri. The village has been currently operated until now as an example of disaster safety village in rural regions, and various activities including training and educational programs are carried out in order to reinforce the disaster prevention capability of residents. The findings of this study can be used for establishing a disaster safety village in a rural area based on such characteristics.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.5
• /
• pp.340-346
• /
• 2000

This experiment was conducted to investigate the effect of nitrogen fertilization in job's tears (Coix lachryma-jobi L.) on the growth characteristics, grain yield, nitrogen accumulation, and chemical property of soil after harvest. Heading and budding stages were shorter than control but growth periods was increased because of the increase of ripening periods according to the increase of nitrogen fertilizer applications. Number of main culm node and culm diameter was similar but culm length and tiller number per plant were better according to the increment of nitrogen fertilizer applications than control but the decrease of grain yield was attributed to the fact that damage by corn borer was 30% in $240kg\;ha^{-1}$ of nitrogen treatment. Some of yield components was better according to the increment of nitrogen fertilizer applications but grain number per plant of $160kg\;ha^{-1}$ of nitrogen treatment was greater. So grain yield was the highest ($3,410kg\;ha^{-1}$) at the $160kg\;ha^{-1}$ of nitrogen fertilization. Nitrogen use efficiency decreased according to the increase of nitrogen fertilization. Total nitrogen of soil after experiment in 0, $80kg\;ha^{-1}$ of nitrogen treatments was lower and in 160, $240kg\;ha^{-1}$ of nitrogen treatments was higher than that before the experiment.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.153-164
• /
• 2009

This Paper presents the severity analysis result of the year 2006 national pedestrian crashes using the data base of 37,589 records prepared for the National Police Bureau. A set of attributing factors considered to affect pedestrian crash patterns were selected, and their contributing effects were investigated by applying the Ordered Logit Model. This model was selected because this model has been able to afford satisfactory results when the dependent variable involved ordered severity levels; fatal, injury, and property- damage-only in this investigation. The investigation has unveiled the followings; First, the pedestrian crash patterns were dependent upon human -drivel and pedestrian- characteristics including gender, age, and drinking conditions. Second, other contributing factors included vehicle, roadway geometric, weather, and hour of day characteristics. Third, seasonal effect was not contributive to crash patterns. Finally, the application of the Ordered Logit Model facilitated the ordered severity level analysis of the pedestrian crash data. This paper concludes that conventional wisdom on the pedestrian crash characteristics is largely truthful. However, this conclusion is limited only to the data used in this analysis, and further research is required for its generalization.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.27-39
• /
• 2008

Landslides cause enormous economic losses and casualties. Korea has mountainous regions and heavy slopes in most parts of the land and has consistently built new roads and large-scale housing complexes according to its industrial and urban growth. As a result, the damage from landslides becomes greater every year. In summer, landslides frequently occur due to local torrential rains and storms. It is critical to predict the potential areas of landslides in advance and to take preventive measures to minimize consequences and to protect property and human life. The previous study on landslides mostly focused on identifying the causes of landslides in the areas where they occurred, and on analyzing landslide vulnerability around the areas without considering rainfall conditions. Thus there were not enough evaluations of the direct risk of landslides to human life. In this study, potentially risky areas for landslides were identified using the GIS data in order to evaluate direct risk on farmlands, roads, and artificial structures that were closely connected to human life. A map of landslide risk was made taking into account rainfall conditions, and a land use map was also drawn with satellite images and digital maps. Both maps were used to identify potentially risky areas for landslides.

• Fire Science and Engineering
• /
• v.23 no.6
• /
• pp.66-74
• /
• 2009

When a fire occurs, the concrete structure's strength decreases by the increasing temperature under the fire in certain condition of constant load. And, the ratio of the axial force is changed by such decreased strength so that the structure is deformed. In this research, considering such case, we have conducted an actual fire test for the concrete lining with constant loading condition and various fire conditions. The specimen adopts the shape condition for small practical specimen defined by the EFNARC and we used 24MPa, 40MPa and 50MPa to analyze the thermal properties by the strength. The ratio of loading is imposed by a certain loading condition based on 20% and 40% of the sectional stress in concrete and MHC Fire is selected to realize the thermal impact of the concrete by rapid increasing temperature. As the result of the experiment, in the same ratio of loading, the 50MPa specimen shows more cracks and spalling as time goes on. The area damaged by the fire, according to the functional criteria of the concrete lining under the fire in ITA, does not satisfy with the standard in lack of 50mm depth from the heating surface at total 200mm lining.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3719-3725
• /
• 2012

Due to the recent shortage of well-graded river sand resulting from a rapid growth of concrete construction, sea sand, crushed sand, and etc. are increasingly used instead. It is, however, well noted that non-washed sea sand leads to corrosion of the reinforcing steel in concrete, and thus eventually results in damage to concrete. Also, the crushed sand is not being widely used, since it is difficult to maintain the allowable amount of passing 0.08mm sieve and to adjust grading. On the other hand, because the fine sand of Nakdong-River has a poor grading but good quality as a fine aggregate for concrete, it is strongly needed to investigate the fine sand as an alternative fine aggregate. Thus, the purpose of this research is to evaluate the physical properties of the fine sand of Nakdong-River to utilize it actively as a fine aggregate. For this purpose, after the sand samples were collected according to typical location of main stream of Nakdong-River, the physical properties such as density in oven-dry condition, grading, unit volume mass, and etc. of them were estimated. It was observed from the test results that physical properties of the fine sand of Nakdong-River except grading were found to be excellent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.308-313
• /
• 2016

Modern systems have become more and more complex due to the ever-increasing user requirements and rapid advance of technology. As such, the frequency of accidents due to system design errors or failure has been increasing. When the damage incurred by accidents to human beings or property is serious, the underlying systems are referred to as safety-critical systems. The development of such systems requires special efforts to ensure the safety of the human beings operating them. To cope with such a requirement, in this paper an approach is employed in which we consider safety starting from the conceptual design phase of the systems. Specifically, a systems design method that can detect functional failure is proposed by utilizing meta-models and M&S methods. To accomplish this, the safety design data from international safety standards are first extracted and also a meta-model is generated using SysML (systems modeling language). Then, a SysML-based system design method is proposed based on the use of the developed meta-model. We also discuss how the safety requirements can be created and verified using a simulation method. Finally, through a case study in automotive design, it is demonstrated that the detection of a functional failure and the verification of a safety requirement can be accomplished using the SysML-based M&S method. This study indicates that the use of meta-models can be useful for collecting and managing safety data and that the meta-model based M&S method can make it possible to satisfy the system requirements by reducing the design errors.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.4
• /
• pp.126-133
• /
• 2017

This study analyzed hydrological changes of stormwater runoff of Seolleung Jeongneung zone according to the application of LID system based on landscape Architectural technology. The results are as follows. First, when flooding occurred in Gwanghwamun in July 27, 2011, the maximum instantaneous rainfall amount was 183 mm/hr recorded at 10:00 on 27th for 10 minutes, and it was confirmed that rainfall intensity more than three times as high as the maximum rainfall of 57.5 mm/hr. Second, it is possible to control peak flow rate in the case of 1,500mm of soil thickness, so that it is possible to improve the vulnerability of flood damage in Seolleung and Jeongneung zone when applying the LID system. Third, in the berm height scenario, peak flow rate control was not controled in all depth level models, but the first stormwater runoff was delayed by 4 hours and 10 minutes compared to the soil thickness scenario. It was interpreted as a relatively important indicator the soil thickness for the initial stromwater runoff reduction and the berm height for the peak runoff. Through this, the systematic adaptation of landscape-friendly ecological factors within the cultural property protection zone could theoretically confirm the effects of flood disaster prevention.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.2
• /
• pp.37-43
• /
• 2014

Natural disasters such as earthquakes and tsunamis occur suddenly, so that they cause massive loss of lives and property. Especially earthquakes represent a particularly severe threat because of the extensive damage accompanied by them. In Korea, an earthquake-resistant design has been rarely applied to a design or construction of slope. However, in resent years, the researches for earthquake-resistance have been performed because the importance on the earthquake-resistance is perceived and highlighted. Soil nail method, one of the slope stability methods, is excellent for its constructability and cost effectiveness, as compared with other stability methods. Also, this method has been widely used for reinforced construction for slope stability. The studies of soil nail method have been performed on the interaction behavior between nails and slopes as well as the varied load condition such as static load, dynamic load and so on. Nevertheless, there has been minimal research regarding the constraint condition of nail head. In this study, the numerical analysis was performed for identifying effect on slope stability for the constrain condition of the soil nail. The result shows that the resistance of constrained the nail head on reinforced slope is larger compared to the one of unconstrained nail head.

• Journal of the Korea Institute of Construction Safety
• /
• v.1 no.1
• /
• pp.31-39
• /
• 2018

It is reported that about 20 % of all fires in Korea are caused by the electric equipment and installations. In complex and large-scale buildings, the sizes of electric fires are becoming larger as property damage and casualties increase. Among the causes of various electric fires, fire by short circuit accounts for about 71.5% of overall fires, and in the classification by electric equipment and installation, fire caused by wiring and wiring equipment accounts for approximately 38.3% of overall fires. The purpose of this study is to propose methods to prevent electric fires due to short circuit by improving indoor wiring currently in use and to find the fundamental measures to prevent wiring equipment caused fires by improving the socket and plug which are commonly used in wiring equipment. It is expected that the electric fire prevention measures presented through this study can be used as a measure to protect many people and properties by eliminating the root cause of electric fire.