• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.230-236
• /
• 2018

Earthquakes over 5.0 on the Richter scale have recently occurred in Korea, which has led to interest in the seismic safety of structures. If a water storage facility is damaged by an earthquake, the water could leak, and the insufficient water would make fire suppression difficult. Therefore, a water storage facility should satisfy safety requirements for earthquakes. In this study, the seismic performance of a water tank was improved by installing a lead rubber bearing between the foundation and the tank. It designed the lead rubber bearing available to the existed concrete foundation. ANSYS was used for modeling to consider the interaction between the fluid and structure of the tank and the hydrostatic and hydrodynamic pressure using four seismic waves. In the case of hydrostatic pressure at 2.5 water level, full level, the same stress appeared irrespective of whether the seismic isolation was installed. When hydrostatic pressure and hydrodynamic pressures are applied at the same time, the seismic-isolated water tank showed less seismic force, and the damping ratio was lower than that of general seismic isolation. This occurred because the weight of the water tank is much smaller than the stiffness of the seismic isolation. The result is expected to be used for further research on seismic capacity evaluation for water tanks.

• Food Science of Animal Resources
• /
• v.38 no.6
• /
• pp.1131-1143
• /
• 2018

This study aimed to investigate the drying yield, meat quality, oxidation stability and sensory properties of Hanwoo beef loin subjected to different dry-aging conditions. A total of 54 Hanwoo beef loins (bone-in, $6^{th}-13^{th}$ ribs) with fat cover at 2 d postmortem were assigned to four groups and hung in a dry-aging room at a controlled temperature ($2^{\circ}C-4^{\circ}C$), humidity (65%-85%) and air velocity (3 m/s). Four treatment conditions were tested; the respective temperature, humidity and treatment duration are as follows: T1, $2^{\circ}C$, 85%, 60 d; T2, $2^{\circ}C$, 65%, $20d+2^{\circ}C$, 75%, $20d+4^{\circ}C$, 85%, 20 d; T3, $2^{\circ}C$, 75%, $20d+4^{\circ}C$, 85%, 40 d; T4, $4^{\circ}C$, 85%, 60 d. The drying yield, total aerobic counts and fat contents increased, whereas the moisture content, meat color (CIE $L^*$, $a^*$, and $b^*$), and Warner-Bratzler shear force values decreased significantly during the aging period for all treatments (p<0.05). The cooking loss (%) did not change significantly until 40 d, and it was significantly higher in T1 and T4 than in T2 and T3 at 60 d (p<0.05). The water-holding capacity, pH and lipid oxidation [thiobarbituric acid reactive substance (TBARS) values] increased during aging (p<0.05). The sensory scores for tenderness, juiciness, flavor, and overall acceptability of dry-aged loin muscles increased as the aging period increased. T2 and T3 had significantly higher sensory scores and T1 had significantly lower scores for tenderness, juiciness, flavor, and overall acceptability at 20, 40, and 60 d for loin muscles (p<0.05).

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.1
• /
• pp.18-24
• /
• 2019

This study was carried out to investigate the effect of milling of boron (B), which is one of raw materials of $MgB_2$, on the critical current density ($J_c$) of $MgB_2$. B powder used in this study is semi-amorphous B (Pavezyum, Turkey, 97% purity, 1 micron). The size of B powder was reduced by planetary milling using $ZrO_2$ balls (a diameter of 2 mm). The B powder and balls with a ratio of 1:20 were charged in a ceramic jar and then the jar was filled with toluene. The milling time was varied from 0 to 8 h. The milled B powders were mixed with Mg powder in the composition of (Mg+2B), and the powder mixtures were uniaxially pressed at 3 tons. The powder compacts were heat-treated at $700^{\circ}C$ for 1 h in flowing argon gas. Powder X-ray diffraction and FWHM (Full width at half maximum) were used to analyze the phase formation and crystallinity of $MgB_2$. The superconducting transition temperature ($T_c$) and $J_c$ of $MgB_2$ were measured using a magnetic property measurement system (MPMS). It was found that $B_2O_3$ was formed by B milling and the subsequent drying process, and the volume fraction of $B_2O_3$ increased as milling time increased. The $T_c$ of $MgB_2$ decreased with increasing milling time, which was explained in terms of the decreased volume fraction of $MgB_2$, the line broadening of $MgB_2$ peaks and the formation of $B_2O_3$. The $J_c$ at 5 K increased with increasing milling time. The $J_c$ increase is more remarkable at the magnetic field higher than 3 T. The $J_c$ at 5 K and 4 T was the highest as $4.37{\times}10^4A/cm^2$ when milling time was 2 h. The $J_c$ at 20 K also increased with increasing milling time. However, The $J_c$ of the samples with the prolonged milling for 6 and 8 h were lower than that of the non-milled sample.

• Korean Journal of Environment and Ecology
• /
• v.35 no.3
• /
• pp.305-312
• /
• 2021

This study aims to analyze the changes (2011→2021) in social and environmental factors, such as actual construction activities, including building development and officially assessed individual land price, of the areas that have been released from the park during the second national park area adjustment period (2010~2011) and compare them with those of the areas that retained parks in the same period to analyze the development impact. In the released area, a building has been constructed per 16,431 square meters since 2011. Moreover, both the number of floors and height of the building has increased, and it was analyzed that the class 2 neighborhood living facilities occupied the highest proportion of the building use. Officially assessed individual land prices increased by 42.3% in the released area and 38.6% in the retained area. The analysis by region showed that the officially assessed land price increased by 55.2% on average in both released and retained areas in Seoul and 9.4% in Gyeonggi-do, indicating a much larger increase in the Seoul region. The issue of private property rights in national parks was mostly resolved as they were released through the second national park area adjustment. However, the Korea National Park needs to promote the benefits of landowners by suggesting rational alternatives such as adjustments to the park zoning and facility planning.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.189-196
• /
• 2020

When concrete member become large like in high rise buildings, hydration heat makes temperature difference inside and outside and cause cracks. The method of using latent heat material as heat reducer could be more accessible, usable and efficient than other methods. Therefore, many studies using PCM as heat reducer are being conducted. Since heat reducer have different reacting temperature, they may be affected by environmental factors like ambient and concrete mixing temperature but studies issuing this are insignificant. Therefore, this paper attempt to evaluate the hydration heat characteristics and quality of concrete using strontium-based PCM under hot weather conditions. As a result, when the strontium-based hydration heat reducer was mixed 3wt.% and 5wt.% in hot weather condition, hydration heat speed and heating rate could be reduced by 8%, 21%, and 75, 85 minutes compared to OPC, respectively. This is considered to be the phase change reaction is relatively promoted when the temperature is high and cause improve performance than room condition result. Later, comparing the efficiency of other types of P.C.M in hot weather condition, and conduct detailed reviews on the strength development in long-term age.

• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.197-210
• /
• 2022

Entomopathogenic fungi can be used to control a variety of sucking and chewing insects, with little effect on beneficial insects and natural enemies. Approximately 170 entomopathogenic fungal insecticides have been registered and used worldwide, with the recent focus being on the mode of action and mechanism of insect-fungal interactions. During the initial period of research and development, the industrialization of entomopathogenic fungi focused on the selection of strains with high virulence. However, improvement in productivity, including securing resistance to environmental stressors, is a major issue that needs to be solved. Although conidia are the primary application propagules, efforts are being made to overcome the limitations of blastospores to improve the economic feasibility of the production procedure. Fungal transformation is also being conducted to enhance insecticidal activity, and molecular biology is being used to investigate functions of various genes. In the fungi-based pest management market, global companies are setting up cooperative platforms with specialized biological companies in the form of M&As or partnerships with the aim of implementing a tank-mix strategy by combining chemical pesticides and entomopathogenic fungi. In this regard, understanding insect ecology in the field helps in providing more effective fungal applications in pest management, which can be used complementary to chemicals. In the future, when fungal applications are combined with digital farming technology, above-ground applications to control leaf-dwelling pests will be more effective. Therefore, for practical industrialization, it is necessary to secure clear research data on intellectual property rights.

• The Korea Journal of Herbology
• /
• v.29 no.2
• /
• pp.15-21
• /
• 2014

Objectives : The purpose of this study was to investigate inhibitory effects of steamed Polygonatum odoratum extract (POE) on differentiation and adipogenesis in 3T3-L1 adipocytes. Methods : Polygonatum odoratum (P. odoratum) extract was extracted with ethyl acetate. Total phenolic and flavonoid contents in POE were measured for antioxidant activity. The spectrophotometric method was used to determine the DPPH and ABTS radical scavenging activity and ferric-reducing antioxidant potential (FRAP). MTT assay was examined for cell toxicity, oil red O staining was performed for intracelluar adipogenesis in differentiated 3T3-L1 adipocytes. Western blot analysis for measurement of CCAAT/enhancer-binding protein ${\alpha}$ ($C/EBP{\alpha}$), peroxisome proliferator-activated receptor${\gamma}$ ($PPAR{\gamma}$) and AMP-activated protein kinase (AMPK) expressions were performed. Results : The results revealed that POE has antioxidant activities. Contents of total polyphenolics and flavonoids were $50.83{\pm}1.52$ GAE mg/100g dry weight of POE and $17.05{\pm}2.47$ RE mg/100g dry weight of POE, respectively. DPPH radical scavenging activity, and FRAP in 10 mg/ml concentration were $92.1{\pm}0.6%$, $244.8{\pm}9.0{\mu}M$ Fe(II) and ABTS inhibition in 5 mg/ml concentration was $84.8{\pm}4.1%$. Treatment of POE in adipocytes inhibited the differentiation and adipogenesis of 3T3-L1 adipocytes compared to those of vehicle control. Additionally, protein expressions of $C/EBP{\alpha}$ and $PPAR{\gamma}$, major transcription factor for the adipogenic genes, were significantly decreased compared to those of vehicle control (p<0.05). Futhermore, phosphorylation of AMPK was increased in 3T3-L1 adipocytes treated with POE compared to that of vehicle control (p<0.05). Conclusions : we demonstrate that steamed P. odoratum extract (POE) has potentiating antioxidant activities, inhibits differentiation and lipid accumulation and also induces energy expenditure in adipocytes, which may contribute to antiobesity property.

• Geomechanics and Engineering
• /
• v.32 no.3
• /
• pp.307-319
• /
• 2023

Ground fissures have a huge effect on the integrity of surface structures. In high-intensity ground fissure regions, however, land resource would be wasted and city building and economic development would be limited if the area avoiding principle was used. In view of this challenge, to reveal the seismic response and seismic failure characteristics of ground fissure sites, a shaking table test on model soil based on a 1:15 scale experiment was carried out. In the test, the spatial distribution characteristics of acceleration response and Arias intensity were obtained for a site exposed to earthquakes with different characteristics. Furthermore, the failure characteristics and damage evolution of the model soil were analyzed. The test results indicated that, with the increase in the earthquake acceleration magnitude, the crack width of the ground fissure enlarged from 0 to 5 mm. The soil of the hanging wall was characterized by earlier cracking and a higher abundance of secondary fissures at 45°. Under strong earthquakes, the model soil, especially the soil near the ground fissure, was severely damaged and exhibited reduced stiffness. As a result, its natural frequency also decreased from 11.41 Hz to 8.05 Hz, whereas the damping ratio increased from 4.8% to 9.1%. Due to the existence of ground fissure, the acceleration was amplified to nearly 0.476 m/s², as high as 2.38 times of the input acceleration magnitude. The maximum of acceleration and Arias intensity appeared at the fissure zone, which decreased from the main fissure toward both sides, showing hanging wall effects. The seismic intensity, duration and frequency spectrum all had certain effects on the seismic response of the ground fissure site, but their influence degrees were different. The seismic response of the site induced by the seismic wave that had richer low-frequency components and longer duration was larger. The discrepancies of seismic response between the hanging wall and the footwall declined obviously when the magnitude of the earthquake acceleration increased. The research results will be propitious to enhancing the utilizing ratio of the limited landing resource, alleviation of property damages and casualties, and provide a good engineering application foreground.

• Composites Research
• /
• v.19 no.1
• /
• pp.9-14
• /
• 2006

Experimental investigation on heat transfer ratio was firstly performed with three types of sandwich panels such as the Carbon/Epoxy Skin-Aluminum Honeycomb and Balsa Core Sandwich Panel of 37mm thickness, the Carbon/Epoxy Aluminum Skin-Honeycomb Core Sandwich Panel of 57mm thickness (including insulator) and the Carbon/Epoxy Skin-Aluminum Honeycomb Core Sandwich Panel of 37mm thickness based on the KS F 2278:2003(Insulation test method of windows). In additional to this investigation, experimental tests were also done for evaluation of heat transportation ratio with the Aluminum Skin- Aluminium Honeycomb Sandwich Panels of 27mm and 35mm thickness, and Aluminum Skin-Foaming Aluminum Sandwich Panel of 27mm thickness by the KS F2277:2002 (Insulation measuring method of construction component-Calibration heat box method or protective heat box method). In this study, it was found that the larger net heat transfer cross sectional area between the skin and the sandwich core is given, the higher heat transportation ratio occurs. It was also found that the hybrid type insulation had better insulation characteristics compared to the non-hybrid type insulation.

• Composites Research
• /
• v.20 no.1
• /
• pp.23-31
• /
• 2007

In order to improve the mechanical properties of jute fiber/polypropylene(PP) composites, the property change with the addition of a coupling agent, maleic anhydride polypropylene(MAPP) was examined experimentally. The maleated coupler acts as an intermediate to chemically connect the polar nature of the fiber and non-polar nature of the polyolefin polymer resin. Furthermore, the decrease in viscosity of the resin which results from the melting point reduction by the MAPP, leads to an increase of contact area with the fiber interface. We discussed the improvement of the PP composite blend of the maleated coupler with the 80mm jute long fiber mat in conjunction with the change of physical parameters in the thermoplastic resin. We confirmed the extent of contribution to the mechanical physical enhancement by using the following parameters: melting flow index(MI) and viscosity, contact angle, thickness of the composite, interfacial shear strength and morphology observation etc. Especially it was observed that the MI and viscosity, MAPP mixture had a very strong relationship with the tensile and flexural strength and modulus, and interfacial shear strength(IFSS).