• Research in Plant Disease
• /
• v.12 no.2
• /
• pp.139-143
• /
• 2006

Virion captured reverse transcription polymerase chain reaction (VC/RT-PCR) could detect plant virus quickly and accurately. In the VC/RT-PCR, no antibody is needed unlike immuno-captured RT-PCR (IC/RT-PCR) which had been improved method of RT-PCR for plant viruses, and virus nucleic acids can be obtained easily within 30minutes by property of polypropylene PCR tube which is hold and immobilized viral particles on its surface. For the virion capture of Tomato spotted wilt virus (TSWV), the extraction buffer was tested. The optimum macerating buffer for TSWV was 0.01M potassium phosphate buffer, pH 7.0, containing 0.5% sodium sulfite. The viral crude sap was incubated for 30 min at $4^{\circ}C$. The virions in the PCR tubes were washed two times with 0.01M PBS containing 0.05% Tween-20. The washed virions were treated at $95^{\circ}C$ immediately for 1 min containing RNase free water and chilled quickly in the ice. Disclosed virions' RNAs by heat treatment were used for RT-PCR. Dilution end point of $10^{-5}$ from plant's crude sap infected with TSWV showed relatively higher detection sensitivity for VC/RT-PCR. During multiple detection using two or more primers, interference was arisen by interactions between primer-primer and plant species. The result of multiplex RT-PCR was influenced by combinations of primers and the kind of plant, and the optimum extraction buffer for the multiplex detection by VC/RT-PCR should be developed.

• Food Science of Animal Resources
• /
• v.28 no.4
• /
• pp.422-430
• /
• 2008

This study was conducted to investigate the nutritional composition and meat quality properties of Hanwoo steer beef by different cut. Ten cuts [Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yanaji (brisket)] prepared from 10 Hanwoo steers (28-30 months old) were used for this experiment. The range of pH was 5.46-5.64. In the chemical analysis, Hongduke contained highest protein contents (21.15%) and Dngsim had lowest protein contents (16.94%) (p<0.05). Fat contents were higher in Dngsim whereas those of Guri, Hongduke and Udoon were significantly lower when compared to the other cuts (p<0.05). There were not significantly different in meat color (L, a and b values) properties only except that L values were significantly higher in Dngsim among 10 cuts (p<0.05). Cooking loss (%) was higher in Guri, Hongduke, Udoon and Yangji whereas it was significantly love. in Cheggt (p<0.05). Warner-Bratzler shear force (WBS) was significantly higher in Abjin $(6.24inch^2/kg)$, whereas Dngsim $(3.45inch^2/kg)$ and Cheggt $(3.50inch^2/kg)$ were significantly lower than the other cuts (p<0.05). There was no significant difference in water-holding capacity (WHC) among 10 cuts (p>0.05). Total amino acid contents were significantly higher in Hongduke (p<0.05). Hongduke was highest in most kinds of amino acids, however, Udoon had the highest methionine and histidine contents among 10 cuts (p<0.05). Glutamate contents were high in all cuts and followed by aspartate, leucine and lysin. With regard to mineral contents, Ca was ranged from 47.63-70.69 mg/kg and Fe was ranged from 15.09-26.68 mg/kg in 10 cuts. Zn was highly contained in Guri (50.56 mg/kg) when compared to the other cuts (p<0.05).

• Journal of Soil and Groundwater Environment
• /
• v.21 no.1
• /
• pp.49-60
• /
• 2016

Distribution and behavior of baseline soil CO₂ were investigated in a candidate geologic CO₂ storage site in Pohang, with measuring CO₂ concentrations and carbon isotopes in the vadose zone as well as CO₂ fluxes and concentrations through ground surface. This investigation aimed to assess the baseline CO₂ levels and to build the CO₂ monitoring system before injecting CO₂. The gas in the vadose zone was collected using a peristaltic pump from the depth of 60 cm below ground surface, and stored at gas bags. Then the gas components (CO₂, O₂, N₂, CH₄) and δ¹³C_CO2 were analyzed using GC and CRDS (cavity ringdown spectroscopy) respectively in laboratory. CO₂ fluxes and CO₂ concentrations through ground surface were measured using Li-COR in field. In result, the median of the CO₂ concentrations in the vadose zone was about 3,000 ppm, and the δ¹³C_CO2 were in the wide range between −36.9‰ and −10.6‰. The results imply that the fate of CO₂ in the vadose zone was affected by soil property and vegetations. CO₂ in sandy or loamy soils originated from the respiration of microorganisms and the decomposition of C₃ plants. In gravel areas, the CO₂ concentrations decreased while the δ¹³C_CO2 increased because of the mixing with the atmospheric gas. In addition, the relation between O₂ and CO₂, N₂, and the relation between N₂/O₂ and CO₂ implied that the gases in the vadose zone dissolved in the infiltrating precipitation or the soil moisture. The median CO₂ flux through ground surface was 2.9 g/m²/d which is lower than the reported soil CO₂ fluxes in areas with temperate climates. CO₂ fluxes measured in sandy and loamy soil areas were higher (median 5.2 g/m²/d) than those in gravel areas (2.6 g/m²/d). The relationships between CO₂ fluxes and concentrations suggested that the transport of CO₂ from the vadose zone to ground surface was dominated by diffusion in the study area. In gravel areas, the mixing with atmospheric gases was significant. Based on this study result, a soil monitoring procedure has been established for a candidate geologic CO₂ storage site. Also, this study result provides ideas for innovating soil monitoring technologies.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.5
• /
• pp.399-407
• /
• 2009

Laser induced breakdown spectroscopy(LIBS) is an simple analysis method for directly quantifying many kinds of soil micro-elements on site using a small size of laser without pre-treatment at any property of materials(solid, liquid and gas). The purpose of this study were to find an optimum condition of the LIBS measurement including wavelengths for quantifying soil elements, to relate spectral properties to the concentration of soil elements using LIBS as a simultaneous un-breakdown quantitative analysis technology, which can be applied for the safety assessment of agricultural products and precision agriculture, and to compare the results with a standardized chemical analysis method. Soil samples classified as fine-silty, mixed, thermic Typic Hapludalf(Memphis series) from grassland and uplands in Tennessee, USA were collected, crushed, and prepared for further analysis or LIBS measurement. The samples were measured using LIBS ranged from 200 to 600 nm(0.03 nm interval) with a Nd:YAG laser at 532 nm, with a beam energy of 25 mJ per pulse, a pulse width of 5 ns, and a repetition rate of 10 Hz. The optimum wavelength(${\lambda}nm$) of LIBS for estimating soil and plant elements were 308.2 nm for Al, 428.3 nm for Ca, 247.8 nm for T-C, 438.3 nm for Fe, 766.5 nm for K, 85.2 nm for Mg, 330.2 nm for Na, 213.6 nm for P, 180.7 nm for S, 288.2 nm for Si, and 351.9 nm for Ti, respectively. Coefficients of determination($r^2$) of calibration curve using standard reference soil samples for each element from LIBS measurement were ranged from 0.863 to 0.977. In comparison with ICP-AES(Inductively coupled plasma atomic emission spectroscopy) measurement, measurement error in terms of relative standard error were calculated. Silicon dioxide(SiO2) concentration estimated from two methods showed good agreement with -3.5% of relative standard error. The relative standard errors for the other elements were high. It implies that the prediction accuracy is low which might be caused by matrix effect such as particle size and constituent of soils. It is necessary to enhance the measurement and prediction accuracy of LIBS by improving pretreatment process, standard reference soil samples, and measurement method for a reliable quantification method.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.299-306
• /
• 2010

This study was performed to develop new functional red ginseng drinks with Astragali Radix and Opuntia humifusa. Optimum extraction conditions such as solvent property and temperature for Astragali Radix were determined by distilled water vs. ethanol (95%) ratio (0:100, 25:75, 50:50, 75:25) and 60 vs. $80^{\circ}C$. Water-soluble extracts at $80^{\circ}C$ showed higher antioxidant activities than fat-soluble extracts at $60^{\circ}C$. Viscosities of 1-2% (w/v) of Opuntia humifusa solution were similar to that of the 0.1% guar gum solution. Addtion of Astragali Radix (3% and 5%, w/v) and Opuntia humifusa (1.2%, w/v), especially, had effect on the changes of pH of the red ginseng solution(5%, w/v) during storage for 7 days. A significant difference during the storage was shown in total plate counts by addition of Opuntia humifusa (1.2%, w/v) and microorganisms were reduced by six log cycles. Significant antiproliferation effects of red ginseng (5%, w/v) solution with Astragali Radix (3% & 5%, w/v) and Opuntia humifusa (1.2%, w/v) on Colon26m-3.1 carcinoma (colorectal carcinoma) cell and U87-MG neuronale glioblastoma (brain carcinoma) cell were not observed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.5
• /
• pp.208-214
• /
• 2019

The glass of $BaO-GeO_2-La_2O_3-ZnO$ system with a transmittance of more than 75 % at mid-wave infrared (MWIR) region in the range of $3{\mu}m$ to $5{\mu}m$ is manufactured and its property is evaluated. After selecting construction that can melt glass through flow button test, $BaO-GeO_2-La_2O_3$ system where 10 mol%, 20 mol% of ZnO were added respectively were melted at $1350^{\circ}C$ for 1 hour and $BaO-GeO_2-La_2O_3$ system of glass was manufactured. Among them, with 20 mol% of ZnO, 16 mol% BaO-56 mol% $GeO_2-8mol%$ $La_2O_3-16mol%$ ZnO system of glass was found to has less than $660^{\circ}C$ of glass transition temperature, more than 1.70 of refractive index, and more than 530 of knoop hardness. Therefore, it is concluded that glass of $BaO-GeO_2-La_2O_3-ZnO$ system of glass with 20 mol% ZnO has good melting conditions at low temperatures and excellent optical properties, thus, can be utilized for special optical materials field.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.152-160
• /
• 2005

This study was carried out to investigate selectable criteria in evaluating waxy corn $F_1$ hybrids for developing good eating quality waxy corn variety. The physicochemical property analysis of 6 waxy corn $F_1$ hybrids - Chalok1, Chalok2, Heugjeomchal, Yeonnongl, Chalok4, and Suwon45- showed a range of $11.2\~13.1\%$ for crude protein, $5.1\~6.0\%$ for crude fat, $91.8\~92.6\%$ for amylopectin, and $4.5\~6.6\%$ for free sugar content. The pericarp thickness which is one of the most important characteristics related to tenderness in waxy corn was ranged $34\~47{\mu}m$ in 4 waxy corn hybrids - Yeonnongl, Chalok4, Suwon45, and Heugjeomchal. On the other hand, it was ranged $64\~81{\mu}m$ in Chalok1 and Chalok2. The amylogram analysis by rapid visco analyzer showed that in fresh waxy corn hybrid (DAP25), all amylogram properties except setback were higher in Yeonnongl, Chalok4, and Suwon45 compared to those of Chalokl, Chnlok2, and Heugjeomchal. However, in matured waxy corn hybyids (DAP45), the result was the opposite - the amylogram properties were higher in Chalokl, Chalok2, and Heugjeomchal than those of Yeonnongl, Chalok4, and Suwon45. The texture analysis showed that gumminess, chewiness, and hardness increased dramatically with the time after the cooking in Chalokl and Beugjeomchal. On the other hand, these above pyoperties did not change as rapidly with the time in Yeonnongl, Chalok4, and Suwon45. Gumminess, chewiness, and hardness did not increase much within 6 hours after steamingr but increased significantly 32 hours after steaming. Therefore, we have reached a conclusion that texture analysis of cooked waxy corn should be carried out 6 hours after steaming. In the sensory evaluation, Yeonnongl, Chalok4, and Suwon45 revealed higher palatability -6.8, 7.1, and 6.9 respectively - than. that of Chnlokl, Chalok2, and Heugjeomchal. The palatability analysis of 6 waxy corn hybrids showed palatability positively correlating with free sugar content,100-kernel weight, kernel length, kernet width, and consistency, but negatively correlating with pericarp thickness, hardness, gumminess, and chewiness.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.418-428
• /
• 2007

Physical and chemical properties of the aggregate by-products including sludge and crushed dust samples collected from the 21 private companies throughout the country were analyzed to evaluate possible usage of the by-products as artificial soil materials for plantation. The pH of the materials ranged from 8.0 to 11.0. The organic matter content was $2.85g\;kg^{-1}$, and the total nitrogen content and available phosphate content were low as 0.7 percents and $12.98mg\;kg^{-1}$, respectively. Exchangeable $Ca^{2+}$, $Mg^{2+}$, $K^+$, and $Na^+$ were 2.29, 0.47, 0.02 and $0.05cmol\;kg^{-1}$, respectively. Heavy metal contents were lower than the limits regulated by environmental law of Korea. Textural analysis showed that most of the materials were silt loam with low water holding capacity ranged from 0.67 to 7.41 percents, and with low hydraulic conductivity ranged from 0.4 to $2.8m\;s^{-1}$. Mineralogical analysis showed that the aggregate by product materials were mostly composed of silicate, alumina and ferric oxides except calcium oxide dominant materials derived from limestones. The primary minerals were quartz, feldspars and dolomites derived from granite and granitic gneiss materials. Some samples derived from limestone material showed calcite and graphite together with the above minerals. According to the result, it can be concluded that the materials could be used as the artificial soil material for plantation after proper improvement of the physico-chemical properties and fertility.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.65-71
• /
• 2008

The effect of rice bran (RB) applied alone or in combination with chemical fertilizer at different application rate on the phytochemical and antioxidant properties of rice was investigated. The treatments were 3 levels of RB namely: 200% RB (500 kg $10a^{-1}$), 100% RB (250 kg $10a^{-1}$), 50% RB (125 kg $10a^{-1}$), Recommended fertilizer dose (RF: $N-{P_2}{O_5}{K_2}O$, 11-5.5-4.8 kg $10a^{-1}$) combined with each RB, Half-recommended fertilizer dose (HRF: $N-{P_2}{O_5}{K_2}O$, 5.5-2.75-2.4 kg $10a^{-1}$) combined with each RB, RF and HRF applied at 1, 5, 10 days before rice transplanting (DBT). The parameters investigated were antioxidant, phytosterol and fatty acid contents. Results showed that the antioxidant property and phytosterol contents were high at 10 DBT HRF plus RB, 5 DBT RF plus RB, and 1 DBT 100 and 200% RB. However, total polyphenols increased from 10 to 1 DBT. In the case of fatty acids, no general trend was observed between treatments at different application times. Linoleic acid was high at 10 DBT HRF plus RB while linolenic acid was not affected at different application times. Palmitoeic and oleic acids were not also affected at 5 and 10 DBT. Saturated fatty acids were not also affected by any treatment at different application times except for palmitic acid.Most parameters obtained higher values at 100 and 200% RB treatments in 1 DBT.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.281-290
• /
• 2011

We analyzed the basic characteristics and adsorption property of carbonized materials from thinning byproducts of major Korean wood species for evaluating as charcoal making raw material. Yield of charcoal was decreased with increasing the carbonization temperature for all wood species. Refining degrees was 9.0 at $400^{\circ}C$, 3.3~5.0 at $600^{\circ}C$ and 0 at $800^{\circ}C$, and was no difference among wood species. With increasing the carbonization temperature, the fixed carbon content was also increased, and charcoal from softwoods had more fixed carbon content than that from hardwoods. Specific surface area was increased with increasing the carbonization temperature, softwood charcoal had more specific surface area than that of hardwood. Pinus rigida showed the highest specific surface area. In formaldehyde removal by charcoal, some materials had highest at $600^{\circ}C$ and the others had highest at $800^{\circ}C$. Pinus koraiensis, Qurcus acutissima and MDF showed maximum formaldehyde removal ability at $600^{\circ}C$. Ethylene gas removal ability of charcoal was increased with increasing the carbonization temperature, and the charcoal from Pinus rigida and Robinia pseudoacacia had higher ethylene gas removal ability than the other species.